lkml.org 
[lkml]   [2018]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 01/18] doc: dt-bindings: jz4780-dma: Update bindings to reflect driver changes
On Sat, Jul 21, 2018 at 01:06:26PM +0200, Paul Cercueil wrote:
> The driver is now compatible with four SoCs: JZ4780, JZ4770, JZ4725B and
> JZ4740.

What the driver supports is irrelevant to the binding.
>
> Besides, it now expects the devicetree to supply a second memory
> resource. This resource is mandatory on the newly supported SoCs.
> For the JZ4780, new devicetree code must also provide it, although the
> driver is still compatible with older devicetree binaries.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Tested-by: Mathieu Malaterre <malat@debian.org>
> ---
> Documentation/devicetree/bindings/dma/jz4780-dma.txt | 14 ++++++++++----
> 1 file changed, 10 insertions(+), 4 deletions(-)
>
> v2: New patch in this series; regroups the changes made to the
> jz4780-dma.txt doc file in the previous version of the patchset.
>
> v3: Updated example to comply with devicetree specification
>
> diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
> index f25feee62b15..14f33305e194 100644
> --- a/Documentation/devicetree/bindings/dma/jz4780-dma.txt
> +++ b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
> @@ -2,8 +2,13 @@
>
> Required properties:
>
> -- compatible: Should be "ingenic,jz4780-dma"
> -- reg: Should contain the DMA controller registers location and length.
> +- compatible: Should be one of:
> + * ingenic,jz4740-dma
> + * ingenic,jz4725b-dma
> + * ingenic,jz4770-dma
> + * ingenic,jz4780-dma

So none of these are compatible with each other? It should be one valid
combination per line.

> +- reg: Should contain the DMA channel registers location and length, followed
> + by the DMA controller registers location and length.
> - interrupts: Should contain the interrupt specifier of the DMA controller.
> - interrupt-parent: Should be the phandle of the interrupt controller that
> - clocks: Should contain a clock specifier for the JZ4780 PDMA clock.
> @@ -20,9 +25,10 @@ Optional properties:
>
> Example:
>
> -dma: dma@13420000 {
> +dma: dma-controller@13420000 {
> compatible = "ingenic,jz4780-dma";
> - reg = <0x13420000 0x10000>;
> + reg = <0x13420000 0x400
> + 0x13421000 0x40>;
>
> interrupt-parent = <&intc>;
> interrupts = <10>;
> --
> 2.11.0
>

\
 
 \ /
  Last update: 2018-07-25 01:36    [W:0.189 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site