lkml.org 
[lkml]   [2018]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 3/3] dmaengine: imx-sdma: allocate max 20 bds for one transfer
From
Date
Am Dienstag, den 24.07.2018, 01:46 +0800 schrieb Robin Gong:
> If multi-bds used in one transfer, all bds should be consisten
> memory.To easily follow it, enlarge the dma pool size into 20 bds,
> and it will report error if the number of bds is over than 20. For
> dmatest, the max count for single transfer is NUM_BD *
> SDMA_BD_MAX_CNT = 20 * 65535 = ~1.28MB.

Both the commit message and the comment need a lot more care to
actually tell what this commit is trying to achieve. Currently I don't
follow at all. What does "consisten" mean? Do you mean BDs should be
contiguous in memory?

What do you gain by over-allocating each BD by a factor of 20?

Regards,
Lucas

> Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> ---
>  drivers/dma/imx-sdma.c | 17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index b4ec2d2..5973489 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -298,6 +298,15 @@ struct sdma_context_data {
> >   u32  scratch7;
>  } __attribute__ ((packed));
>  
> +/*
> + * All bds in one transfer should be consitent on SDMA. To easily follow it,just
> + * set the dma pool size as the enough bds. For example, in dmatest case, the
> + * max 20 bds means the max for single transfer is NUM_BD * SDMA_BD_MAX_CNT = 20
> + * * 65535 = ~1.28MB. 20 bds supposed to be enough basically.If it's still not
> + * enough in some specific cases, enlarge it here.Warning message would also
> + * appear if the bd numbers is over than 20.
> + */
> +#define NUM_BD 20
>  
>  struct sdma_engine;
>  
> @@ -1273,7 +1282,7 @@ static int sdma_alloc_chan_resources(struct dma_chan *chan)
> >   goto disable_clk_ahb;
>  
> >   sdmac->bd_pool = dma_pool_create("bd_pool", chan->device->dev,
> > - sizeof(struct sdma_buffer_descriptor),
> > + NUM_BD * sizeof(struct sdma_buffer_descriptor),
> >   32, 0);
>  
> >   return 0;
> @@ -1314,6 +1323,12 @@ static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac,
>  {
> >   struct sdma_desc *desc;
>  
> > + if (bds > NUM_BD) {
> > + dev_err(sdmac->sdma->dev, "%d bds exceed the max %d\n",
> > + bds, NUM_BD);
> > + goto err_out;
> > + }
> +
> >   desc = kzalloc((sizeof(*desc)), GFP_NOWAIT);
> >   if (!desc)
> >   goto err_out;

\
 
 \ /
  Last update: 2018-07-23 12:55    [W:0.121 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site