lkml.org 
[lkml]   [2018]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/20] staging:rtl8192u: Remove unused page-8 Bit Mask definitions - Style
Date
Remove unused 'page-8' Bit Mask definitions. These definitions fail the
checkpatch CamelCase naming test, since they are unused in code they have
simply been removed from code, rather then renamed. This is a coding
style change which should not impact runtime code execution.
* page-8
*/

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
drivers/staging/rtl8192u/r819xU_phyreg.h | 114 -----------------------
1 file changed, 114 deletions(-)

diff --git a/drivers/staging/rtl8192u/r819xU_phyreg.h b/drivers/staging/rtl8192u/r819xU_phyreg.h
index fb0b388f6759..211f34359e43 100644
--- a/drivers/staging/rtl8192u/r819xU_phyreg.h
+++ b/drivers/staging/rtl8192u/r819xU_phyreg.h
@@ -108,131 +108,17 @@
* page-8
*/
#define bRFMOD 0x1
-#define bJapanMode 0x2
-#define bCCKTxSC 0x30
#define bCCKEn 0x1000000
#define bOFDMEn 0x2000000
-#define bOFDMRxADCPhase 0x10000
-#define bOFDMTxDACPhase 0x40000
-#define bXATxAGC 0x3f
#define bXBTxAGC 0xf00
#define bXCTxAGC 0xf000
-#define bXDTxAGC 0xf0000
-#define bPAStart 0xf0000000
-#define bTRStart 0x00f00000
-#define bRFStart 0x0000f000
-#define bBBStart 0x000000f0
-#define bBBCCKStart 0x0000000f
-#define bPAEnd 0xf /* Reg0x814 */
-#define bTREnd 0x0f000000
-#define bRFEnd 0x000f0000
-#define bCCAMask 0x000000f0 /* T2R */
-#define bR2RCCAMask 0x00000f00
-#define bHSSI_R2TDelay 0xf8000000
-#define bHSSI_T2RDelay 0xf80000
-#define bContTxHSSI 0x400 /* chane gain at continue Tx */
-#define bIGFromCCK 0x200
-#define bAGCAddress 0x3f
-#define bRxHPTx 0x7000
-#define bRxHPT2R 0x38000
-#define bRxHPCCKIni 0xc0000
-#define bAGCTxCode 0xc00000
-#define bAGCRxCode 0x300000
#define b3WireDataLength 0x800
#define b3WireAddressLength 0x400
-#define b3WireRFPowerDown 0x1
-/* #define bHWSISelect 0x8 */
-#define b5GPAPEPolarity 0x40000000
-#define b2GPAPEPolarity 0x80000000
-#define bRFSW_TxDefaultAnt 0x3
-#define bRFSW_TxOptionAnt 0x30
-#define bRFSW_RxDefaultAnt 0x300
-#define bRFSW_RxOptionAnt 0x3000
-#define bRFSI_3WireData 0x1
-#define bRFSI_3WireClock 0x2
-#define bRFSI_3WireLoad 0x4
-#define bRFSI_3WireRW 0x8
-#define bRFSI_3Wire 0xf /* 3-wire total control */
#define bRFSI_RFENV 0x10
-#define bRFSI_TRSW 0x20
-#define bRFSI_TRSWB 0x40
-#define bRFSI_ANTSW 0x100
-#define bRFSI_ANTSWB 0x200
-#define bRFSI_PAPE 0x400
-#define bRFSI_PAPE5G 0x800
-#define bBandSelect 0x1
-#define bHTSIG2_GI 0x80
-#define bHTSIG2_Smoothing 0x01
-#define bHTSIG2_Sounding 0x02
-#define bHTSIG2_Aggreaton 0x08
-#define bHTSIG2_STBC 0x30
-#define bHTSIG2_AdvCoding 0x40
-#define bHTSIG2_NumOfHTLTF 0x300
-#define bHTSIG2_CRC8 0x3fc
-#define bHTSIG1_MCS 0x7f
-#define bHTSIG1_BandWidth 0x80
-#define bHTSIG1_HTLength 0xffff
-#define bLSIG_Rate 0xf
-#define bLSIG_Reserved 0x10
-#define bLSIG_Length 0x1fffe
-#define bLSIG_Parity 0x20
-#define bCCKRxPhase 0x4
#define bLSSIReadAddress 0x3f000000 /* LSSI "Read" Address */
#define bLSSIReadEdge 0x80000000 /* LSSI "Read" edge signal */
#define bLSSIReadBackData 0xfff
-#define bLSSIReadOKFlag 0x1000
-#define bCCKSampleRate 0x8 /* 0: 44MHz, 1:88MHz */
-#define bRegulator0Standby 0x1
-#define bRegulatorPLLStandby 0x2
-#define bRegulator1Standby 0x4
-#define bPLLPowerUp 0x8
-#define bDPLLPowerUp 0x10
-#define bDA10PowerUp 0x20
-#define bAD7PowerUp 0x200
-#define bDA6PowerUp 0x2000
-#define bXtalPowerUp 0x4000
-#define b40MDClkPowerUP 0x8000
-#define bDA6DebugMode 0x20000
-#define bDA6Swing 0x380000
-#define bADClkPhase 0x4000000
-#define b80MClkDelay 0x18000000
-#define bAFEWatchDogEnable 0x20000000
#define bXtalCap 0x0f000000
-#define bIntDifClkEnable 0x400
-#define bExtSigClkEnable 0x800
-#define bBandgapMbiasPowerUp 0x10000
-#define bAD11SHGain 0xc0000
-#define bAD11InputRange 0x700000
-#define bAD11OPCurrent 0x3800000
-#define bIPathLoopback 0x4000000
-#define bQPathLoopback 0x8000000
-#define bAFELoopback 0x10000000
-#define bDA10Swing 0x7e0
-#define bDA10Reverse 0x800
-#define bDAClkSource 0x1000
-#define bAD7InputRange 0x6000
-#define bAD7Gain 0x38000
-#define bAD7OutputCMMode 0x40000
-#define bAD7InputCMMode 0x380000
-#define bAD7Current 0xc00000
-#define bRegulatorAdjust 0x7000000
-#define bAD11PowerUpAtTx 0x1
-#define bDA10PSAtTx 0x10
-#define bAD11PowerUpAtRx 0x100
-#define bDA10PSAtRx 0x1000
-
-#define bCCKRxAGCFormat 0x200
-
-#define bPSDFFTSamplepPoint 0xc000
-#define bPSDAverageNum 0x3000
-#define bIQPathControl 0xc00
-#define bPSDFreq 0x3ff
-#define bPSDAntennaPath 0x30
-#define bPSDIQSwitch 0x40
-#define bPSDRxTrigger 0x400000
-#define bPSDTxTrigger 0x80000000
-#define bPSDSineToneScale 0x7f000000
-#define bPSDReport 0xffff

/* page-9 */
#define bOFDMTxSC 0x30000000
--
2.18.0
\
 
 \ /
  Last update: 2018-07-23 00:12    [W:0.065 / U:5.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site