lkml.org 
[lkml]   [2018]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] usb: host: xhci-plat: Iterate over parent nodes for finding quirks
From
Date
Hi

Sorry about the delay with this patch,
I have a couple comments inline.

On 05.06.2018 18:20, Anurag Kumar Vulisha wrote:
> In xhci_plat_probe() both sysdev and pdev->dev are being used
> for finding quirks. There are some drivers(like dwc3 host.c)
> which adds quirks(like usb3-lpm-capable) into pdev and the logic
> present in xhci_plat_probe() checks for quirks in either sysdev
> or pdev for finding the quirks. Because of this logic, some of
> the quirks are getting missed(usb3-lpm-capable quirk added by dwc3
> host.c driver is getting missed).This patch fixes this by iterating
> over all the available parents for finding the quirks. In this way
> all the quirks which are present in child or parent are correctly
> updated.
>
> Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
> ---
> drivers/usb/host/xhci-plat.c | 29 ++++++++++++++++++-----------
> 1 file changed, 18 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index c1b22fc..0cd0489 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -152,7 +152,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
> {
> const struct xhci_plat_priv *priv_match;
> const struct hc_driver *driver;
> - struct device *sysdev;
> + struct device *sysdev, *tmpdev;
> struct xhci_hcd *xhci;
> struct resource *res;
> struct usb_hcd *hcd;
> @@ -272,19 +272,26 @@ static int xhci_plat_probe(struct platform_device *pdev)
> goto disable_clk;
> }
>
> - if (device_property_read_bool(sysdev, "usb2-lpm-disable"))
> - xhci->quirks |= XHCI_HW_LPM_DISABLE;
> + /* Iterate over all parent nodes for finding quirks */
> + for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) {

Isn't sysdev at this point the topmost device that can have any of those
device properties set?
We could loop from &pdev->dev up to and including sysdev.

It doesn't matter much but maybe avoid walking some extra parents.

>
> - if (device_property_read_bool(sysdev, "usb3-lpm-capable"))
> - xhci->quirks |= XHCI_LPM_SUPPORT;
> + if (device_property_read_bool(tmpdev, "usb2-lpm-disable"))
> + xhci->quirks |= XHCI_HW_LPM_DISABLE;
>
> - if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped"))
> - xhci->quirks |= XHCI_BROKEN_PORT_PED;
> + if (device_property_read_bool(tmpdev, "usb3-lpm-capable"))
> + xhci->quirks |= XHCI_LPM_SUPPORT;
>
> - /* imod_interval is the interrupt moderation value in nanoseconds. */
> - xhci->imod_interval = 40000;

Setting the default imod_interval could be moved before the for() loop

> - device_property_read_u32(sysdev, "imod-interval-ns",
> - &xhci->imod_interval);
> + if (device_property_read_bool(tmpdev, "quirk-broken-port-ped"))
> + xhci->quirks |= XHCI_BROKEN_PORT_PED;
> +
> + /*
> + * imod_interval is the interrupt moderation
> + * value in nanoseconds.
> + */
> + xhci->imod_interval = 40000;
> + device_property_read_u32(tmpdev, "imod-interval-ns",
> + &xhci->imod_interval);
> + }
>
> hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
> if (IS_ERR(hcd->usb_phy)) {
>

Otherwise everything looks fine.
I will unfortunately be away again for another two weeks.

-Mathias

\
 
 \ /
  Last update: 2018-07-20 16:41    [W:0.133 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site