lkml.org 
[lkml]   [2018]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 6/8] serial: Add Tegra Combined UART driver
From
Date
On 02.07.2018 16:18, Thierry Reding wrote:
> On Mon, Jul 02, 2018 at 02:40:31PM +0300, Mikko Perttunen wrote:
>> The Tegra Combined UART (TCU) is a mailbox-based mechanism that allows
>> multiplexing multiple "virtual UARTs" into a single hardware serial
>> port. The TCU is the primary serial port on Tegra194 devices.
>>
>> Add a TCU driver utilizing the mailbox framework, as the used mailboxes
>> are part of Tegra HSP blocks that are already controlled by the Tegra
>> HSP mailbox driver.
>>
>> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
>> ---
>>
>> Notes:
>> v2:
>> - Removed (void) casts for unused variables.
>> - Changed the uart_set_options() call to be on one line, even if its
>> over 80 characters.
>> - Added defines for magic numbers.
>> - Style fixes.
>> - Changed Kconfig entry to depend on the Tegra HSP driver instead of
>> just the mailbox framework.
>>
>> v3:
>> - Removed FLUSH bit, as it's unnecessary and slows down printing
>> - Removed call to uart_set_options
>> - Added mbox_free_channel calls to remove()
>>
>> drivers/tty/serial/Kconfig | 9 ++
>> drivers/tty/serial/Makefile | 1 +
>> drivers/tty/serial/tegra-tcu.c | 291 +++++++++++++++++++++++++++++++++++++++
>> include/uapi/linux/serial_core.h | 3 +
>> 4 files changed, 304 insertions(+)
>> create mode 100644 drivers/tty/serial/tegra-tcu.c
>
> The driver looks good to me. But for my own understanding, is there some
> way we can make use of the multiplexing? That is, could we add a
> mechanism to have the driver filter out only a specific stream? Could we
> also specify which stream to send data back to? What happens by default?
> Which stream is data sent to?

There is no multiplexing on the producer/device side (i.e. what this
driver does). The mailbox specified in device tree specifies the stream
we send stuff to. The mailboxes are per-CPU (we use the CCPLEX mailbox
here), so it cannot really be changed.

The consumer then sees the multiplexing in that it can receive from and
transmit to all of the various CPUs in the system at the same time. AIUI
there is also a secondary form of multiplexing where the outputs of
different VMs can be multiplexed by the hypervisor, but I'm not very
familiar with that.

Mikko

>
> Thierry
>

\
 
 \ /
  Last update: 2018-07-02 15:31    [W:0.080 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site