lkml.org 
[lkml]   [2018]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/3] ARM: dts: imx51-zii-common: create common include dtsi
Hi all,

I'll rework this patchset without dtsi and resend.

Thanks for comments.

On Thu, Jun 21, 2018 at 8:44 PM, Andrey Gusakov
<andrey.gusakov@cogentembedded.com> wrote:
> Make shared include file. Move common stuff from rdu1 dts file to
> dtsi for future reuse by other imx51 based boards from ZII.
>
> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
> ---
> arch/arm/boot/dts/imx51-zii-common.dtsi | 317 ++++++++++++++++++++++++++++++
> arch/arm/boot/dts/imx51-zii-rdu1.dts | 330 +++-----------------------------
> 2 files changed, 347 insertions(+), 300 deletions(-)
> create mode 100644 arch/arm/boot/dts/imx51-zii-common.dtsi
>
> diff --git a/arch/arm/boot/dts/imx51-zii-common.dtsi b/arch/arm/boot/dts/imx51-zii-common.dtsi
> new file mode 100644
> index 0000000..b0f0643
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx51-zii-common.dtsi
> @@ -0,0 +1,317 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +// Copyright (C) 2018 Zodiac Inflight Innovations
> +
> +#include "imx51.dtsi"
> +
> +/ {
> + chosen {
> + stdout-path = &uart1;
> + };
> +
> + /* Will be filled by the bootloader */
> + memory@90000000 {
> + reg = <0x90000000 0>;
> + };
> +
> + i2c_gpio: i2c-gpio {
> + compatible = "i2c-gpio";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_swi2c>;
> + i2c-gpio,delay-us = <50>;
> + status = "okay";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + usb_vbus: regulator-usb-vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usb_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> +};
> +
> +&cpu {
> + cpu-supply = <&sw1_reg>;
> +};
> +
> +&ecspi1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1>;
> + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
> + <&gpio4 25 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +
> + pmic@0 {
> + compatible = "fsl,mc13892";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pmic>;
> + spi-max-frequency = <6000000>;
> + spi-cs-high;
> + reg = <0>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
> + fsl,mc13xxx-uses-adc;
> +
> + regulators {
> + sw1_reg: sw1 {
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1375000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw2_reg: sw2 {
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1850000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw3_reg: sw3 {
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1850000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw4_reg: sw4 {
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1850000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vpll_reg: vpll {
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vdig_reg: vdig {
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <1650000>;
> + regulator-boot-on;
> + };
> +
> + vsd_reg: vsd {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3150000>;
> + };
> +
> + vusb_reg: vusb {
> + regulator-always-on;
> + };
> +
> + vusb2_reg: vusb2 {
> + regulator-min-microvolt = <2400000>;
> + regulator-max-microvolt = <2775000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vvideo_reg: vvideo {
> + regulator-min-microvolt = <2775000>;
> + regulator-max-microvolt = <2775000>;
> + };
> +
> + vaudio_reg: vaudio {
> + regulator-min-microvolt = <2300000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + vcam_reg: vcam {
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + vgen1_reg: vgen1 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + vgen2_reg: vgen2 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3150000>;
> + regulator-always-on;
> + };
> +
> + vgen3_reg: vgen3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2900000>;
> + regulator-always-on;
> + };
> + };
> +
> + leds {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + led-control = <0x0 0x0 0x3f83f8 0x0>;
> +
> + sysled3: led3@3 {
> + reg = <3>;
> + label = "system:red:power";
> + linux,default-trigger = "default-on";
> + };
> +
> + sysled4: led4@4 {
> + reg = <4>;
> + label = "system:green:act";
> + linux,default-trigger = "heartbeat";
> + };
> + };
> + };
> +
> + flash@1 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "atmel,at45", "atmel,dataflash";
> + spi-max-frequency = <25000000>;
> + reg = <1>;
> + };
> +};
> +
> +&ecspi2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi2>;
> + cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
> + <&gpio3 28 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +};
> +
> +&esdhc1 {
> + non-removable;
> + no-1-8-v;
> + no-sdio;
> + no-sd;
> + status = "okay";
> +};
> +
> +&esdhc4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_esdhc4>;
> + bus-width = <4>;
> + no-1-8-v;
> + no-sdio;
> + cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec>;
> + phy-mode = "mii";
> + status = "okay";
> +};
> +
> +&i2c2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +
> + eeprom@50 {
> + compatible = "atmel,24c04";
> + pagesize = <16>;
> + reg = <0x50>;
> + };
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + status = "okay";
> +};
> +
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + status = "okay";
> +};
> +
> +&usbotg {
> + dr_mode = "host";
> + disable-over-current;
> + phy_type = "utmi_wide";
> + vbus-supply = <&usb_vbus>;
> + status = "okay";
> +};
> +
> +&usbphy0 {
> + vcc-supply = <&vusb2_reg>;
> +};
> +
> +&iomuxc {
> + pinctrl_ecspi1: ecspi1grp {
> + fsl,pins = <
> + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
> + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
> + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
> + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
> + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
> + >;
> + };
> +
> + pinctrl_ecspi2: ecspi2grp {
> + fsl,pins = <
> + MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185
> + MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185
> + MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185
> + MX51_PAD_NANDF_RDY_INT__GPIO3_24 0x85
> + MX51_PAD_NANDF_D12__GPIO3_28 0x85
> + >;
> + };
> +
> + pinctrl_esdhc1_4bit: esdhc1grp_4bit {
> + fsl,pins = <
> + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
> + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
> + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
> + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
> + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
> + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
> + >;
> + };
> +
> + pinctrl_esdhc1_8bit: esdhc1grp_8bit {
> + fsl,pins = <
> + MX51_PAD_SD2_DATA0__SD1_DAT4 0x20d5
> + MX51_PAD_SD2_DATA1__SD1_DAT5 0x20d5
> + MX51_PAD_SD2_DATA2__SD1_DAT6 0x20d5
> + MX51_PAD_SD2_DATA3__SD1_DAT7 0x20d5
> + >;
> + };
> +
> + pinctrl_esdhc4: esdhc4grp {
> + fsl,pins = <
> + MX51_PAD_NANDF_RB1__SD4_CMD 0x400020d5
> + MX51_PAD_NANDF_CS2__SD4_CLK 0x20d5
> + MX51_PAD_NANDF_CS3__SD4_DAT0 0x20d5
> + MX51_PAD_NANDF_CS4__SD4_DAT1 0x20d5
> + MX51_PAD_NANDF_CS5__SD4_DAT2 0x20d5
> + MX51_PAD_NANDF_CS6__SD4_DAT3 0x20d5
> + MX51_PAD_NANDF_D0__GPIO4_8 0x100
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
> + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
> + >;
> + };
> +
> + pinctrl_pmic: pmicgrp {
> + fsl,pins = <
> + MX51_PAD_GPIO1_4__GPIO1_4 0x85
> + MX51_PAD_GPIO1_8__GPIO1_8 0xe5
> + >;
> + };
> +};
> diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
> index df9eca9..59a80da 100644
> --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
> +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
> @@ -1,61 +1,14 @@
> -/*
> - * Copyright (C) 2017 Zodiac Inflight Innovations
> - *
> - * This file is dual-licensed: you can use it either under the terms
> - * of the GPL or the X11 license, at your option. Note that this dual
> - * licensing only applies to this file, and not this project as a
> - * whole.
> - *
> - * a) This file is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License
> - * version 2 as published by the Free Software Foundation.
> - *
> - * This file is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * Or, alternatively,
> - *
> - * b) Permission is hereby granted, free of charge, to any person
> - * obtaining a copy of this software and associated documentation
> - * files (the "Software"), to deal in the Software without
> - * restriction, including without limitation the rights to use,
> - * copy, modify, merge, publish, distribute, sublicense, and/or
> - * sell copies of the Software, and to permit persons to whom the
> - * Software is furnished to do so, subject to the following
> - * conditions:
> - *
> - * The above copyright notice and this permission notice shall be
> - * included in all copies or substantial portions of the Software.
> - *
> - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
> - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> - * OTHER DEALINGS IN THE SOFTWARE.
> - */
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +// Copyright (C) 2018 Zodiac Inflight Innovations
>
> /dts-v1/;
> -#include "imx51.dtsi"
> +#include "imx51-zii-common.dtsi"
> #include <dt-bindings/sound/fsl-imx-audmux.h>
>
> / {
> model = "ZII RDU1 Board";
> compatible = "zii,imx51-rdu1", "fsl,imx51";
>
> - chosen {
> - stdout-path = &uart1;
> - };
> -
> - /* Will be filled by the bootloader */
> - memory@90000000 {
> - reg = <0x90000000 0>;
> - };
> -
> aliases {
> mdio-gpio0 = &mdio_gpio;
> rtc0 = &ds1341;
> @@ -94,14 +47,6 @@
> enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
> };
>
> - reg_5p0v_main: regulator-5p0v-main {
> - compatible = "regulator-fixed";
> - regulator-name = "5V_MAIN";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - regulator-always-on;
> - };
> -
> reg_3p3v: regulator-3p3v {
> compatible = "regulator-fixed";
> regulator-name = "3.3V";
> @@ -150,28 +95,6 @@
> };
> };
>
> - i2c_gpio: i2c-gpio {
> - compatible = "i2c-gpio";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_swi2c>;
> - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */
> - <&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */
> - i2c-gpio,delay-us = <50>;
> - status = "okay";
> -
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - sgtl5000: codec@a {
> - compatible = "fsl,sgtl5000";
> - reg = <0x0a>;
> - clocks = <&clk_26M_snd>;
> - VDDA-supply = <&vdig_reg>;
> - VDDIO-supply = <&vvideo_reg>;
> - #sound-dai-cells = <0>;
> - };
> - };
> -
> spi_gpio: spi-gpio {
> compatible = "spi-gpio";
> #address-cells = <1>;
> @@ -315,178 +238,30 @@
> };
> };
>
> -&cpu {
> - cpu-supply = <&sw1_reg>;
> +&usb_vbus {
> + regulator-always-on;
> };
>
> -&ecspi1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_ecspi1>;
> - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
> - <&gpio4 25 GPIO_ACTIVE_LOW>;
> - status = "okay";
> -
> - pmic@0 {
> - compatible = "fsl,mc13892";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_pmic>;
> - spi-max-frequency = <6000000>;
> - spi-cs-high;
> - reg = <0>;
> - interrupt-parent = <&gpio1>;
> - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
> - fsl,mc13xxx-uses-adc;
> -
> - regulators {
> - sw1_reg: sw1 {
> - regulator-min-microvolt = <600000>;
> - regulator-max-microvolt = <1375000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - sw2_reg: sw2 {
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <1850000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - sw3_reg: sw3 {
> - regulator-min-microvolt = <1100000>;
> - regulator-max-microvolt = <1850000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - sw4_reg: sw4 {
> - regulator-min-microvolt = <1100000>;
> - regulator-max-microvolt = <1850000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - vpll_reg: vpll {
> - regulator-min-microvolt = <1050000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - vdig_reg: vdig {
> - regulator-min-microvolt = <1650000>;
> - regulator-max-microvolt = <1650000>;
> - regulator-boot-on;
> - };
> -
> - vsd_reg: vsd {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3150000>;
> - };
> -
> - vusb_reg: vusb {
> - regulator-always-on;
> - };
> -
> - vusb2_reg: vusb2 {
> - regulator-min-microvolt = <2400000>;
> - regulator-max-microvolt = <2775000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - vvideo_reg: vvideo {
> - regulator-min-microvolt = <2775000>;
> - regulator-max-microvolt = <2775000>;
> - };
> -
> - vaudio_reg: vaudio {
> - regulator-min-microvolt = <2300000>;
> - regulator-max-microvolt = <3000000>;
> - };
> -
> - vcam_reg: vcam {
> - regulator-min-microvolt = <2500000>;
> - regulator-max-microvolt = <3000000>;
> - };
> -
> - vgen1_reg: vgen1 {
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1200000>;
> - };
> -
> - vgen2_reg: vgen2 {
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <3150000>;
> - regulator-always-on;
> - };
> -
> - vgen3_reg: vgen3 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <2900000>;
> - regulator-always-on;
> - };
> - };
> -
> - leds {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - led-control = <0x0 0x0 0x3f83f8 0x0>;
> -
> - sysled0@3 {
> - reg = <3>;
> - label = "system:green:status";
> - linux,default-trigger = "default-on";
> - };
> -
> - sysled1@4 {
> - reg = <4>;
> - label = "system:green:act";
> - linux,default-trigger = "heartbeat";
> - };
> - };
> - };
> -
> - flash@1 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "atmel,at45db642d", "atmel,at45", "atmel,dataflash";
> - spi-max-frequency = <25000000>;
> - reg = <1>;
> - };
> +&ecspi2 {
> + status = "disabled";
> };
>
> &esdhc1 {
> pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_esdhc1>;
> + pinctrl-0 = <&pinctrl_esdhc1_4bit>;
> bus-width = <4>;
> - no-1-8-v;
> - non-removable;
> - no-sdio;
> - no-sd;
> - status = "okay";
> +};
> +
> +&esdhc4 {
> + status = "disabled";
> };
>
> &fec {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_fec>;
> - phy-mode = "mii";
> phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
> phy-supply = <&vgen3_reg>;
> - status = "okay";
> };
>
> &i2c2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c2>;
> - status = "okay";
> -
> - eeprom@50 {
> - compatible = "atmel,24c04";
> - pagesize = <16>;
> - reg = <0x50>;
> - };
> -
> hpa1: amp@60 {
> compatible = "ti,tpa6130a2";
> reg = <0x60>;
> @@ -550,31 +325,29 @@
>
> };
>
> -&ipu_di0_disp1 {
> - remote-endpoint = <&display_in>;
> -};
> +&i2c_gpio {
> + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */
> + <&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */
>
> -&ssi2 {
> - status = "okay";
> + sgtl5000: codec@a {
> + compatible = "fsl,sgtl5000";
> + reg = <0x0a>;
> + clocks = <&clk_26M_snd>;
> + VDDA-supply = <&vdig_reg>;
> + VDDIO-supply = <&vvideo_reg>;
> + #sound-dai-cells = <0>;
> + };
> };
>
> -&uart1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_uart1>;
> - status = "okay";
> +&ipu_di0_disp1 {
> + remote-endpoint = <&display_in>;
> };
>
> -&uart2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_uart2>;
> +&ssi2 {
> status = "okay";
> };
>
> &uart3 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_uart3>;
> - status = "okay";
> -
> rave-sp {
> compatible = "zii,rave-sp-rdu1";
> current-speed = <38400>;
> @@ -593,7 +366,7 @@
> fsl,usbphy = <&usbh1phy>;
> disable-over-current;
> maximum-speed = "full-speed";
> - vbus-supply = <&reg_5p0v_main>;
> + vbus-supply = <&usb_vbus>;
> status = "okay";
> };
>
> @@ -604,20 +377,12 @@
> phy_type = "ulpi";
> fsl,usbphy = <&usbh2phy>;
> disable-over-current;
> - vbus-supply = <&reg_5p0v_main>;
> + vbus-supply = <&usb_vbus>;
> status = "okay";
> };
>
> -&usbphy0 {
> - vcc-supply = <&vusb_reg>;
> -};
> -
> -&usbotg {
> - dr_mode = "host";
> - disable-over-current;
> - phy_type = "utmi_wide";
> - vbus-supply = <&reg_5p0v_main>;
> - status = "okay";
> +&sysled3 {
> + label = "system:green:status";
> };
>
> &iomuxc {
> @@ -642,27 +407,6 @@
> >;
> };
>
> - pinctrl_ecspi1: ecspi1grp {
> - fsl,pins = <
> - MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
> - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
> - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
> - MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
> - MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
> - >;
> - };
> -
> - pinctrl_esdhc1: esdhc1grp {
> - fsl,pins = <
> - MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
> - MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
> - MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
> - MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
> - MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
> - MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
> - >;
> - };
> -
> pinctrl_fec: fecgrp {
> fsl,pins = <
> MX51_PAD_EIM_EB2__FEC_MDIO 0x1f5
> @@ -696,13 +440,6 @@
> >;
> };
>
> - pinctrl_i2c2: i2c2grp {
> - fsl,pins = <
> - MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
> - MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
> - >;
> - };
> -
> pinctrl_ipu_disp1: ipudisp1grp {
> fsl,pins = <
> MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
> @@ -741,13 +478,6 @@
> >;
> };
>
> - pinctrl_pmic: pmicgrp {
> - fsl,pins = <
> - MX51_PAD_GPIO1_4__GPIO1_4 0x1e0
> - MX51_PAD_GPIO1_8__GPIO1_8 0x21e2
> - >;
> - };
> -
> pinctrl_sndgate26mhz: sndgate26mhzgrp {
> fsl,pins = <
> MX51_PAD_CSPI1_RDY__GPIO4_26 0x85
> --
> 1.9.1
>

\
 
 \ /
  Last update: 2018-07-02 10:22    [W:0.154 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site