lkml.org 
[lkml]   [2018]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] HID: intel-ish-hid: Prevent loading of driver on Mehlow
On Tue, Jul 17, 2018 at 10:06 PM Srinivas Pandruvada
<srinivas.pandruvada@linux.intel.com> wrote:
>
> On Mehlow Xeon-E workstation, ISH PCI device is enabled but without ISH
> firmware. Here the ISH device PCI device id was reused for some non Linux
> storage drivers. So this was not done for enabling ISH. But this has a
> undesirable side effect for Linux.
>
> Here the ISH driver will be loaded via PCI enumeration and will try to do
> reset sequence. But reset sequence will wait till timeout as there is no
> real ISH firmware is present to take action. This delay will add to boot
> time of Linux (This platform will still continue to boot after this
> timeout).
>
> To avoid this boot delay we need to prevent loading of ISH drivers on
> this platform. So we need to have hack to avoid treating this device as
> ISH on this platform. To identify this workstation, we need some runtime
> method. Luckily there are special PCI id on this workstation to
> distinguish from the client version of this platform. On client version,
> the ISH is supported using same PCI device id. So this change look for
> the presence of PCI device IDs A309 and A30A and exit.
>
> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> ---
> This is not a change for 4.18-rc.
>
> drivers/hid/intel-ish-hid/ipc/pci-ish.c | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
> index a2c53ea3b5ed..d6e7156c36d9 100644
> --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c
> +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
> @@ -95,6 +95,26 @@ static int ish_init(struct ishtp_device *dev)
> return 0;
> }
>
> +
> +static bool ish_invalid_firmware(void)
> +{
> + struct pci_dev *pdev;
> +
> + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0xA309, NULL);
> + if (pdev) {
> + pci_dev_put(pdev);
> + return true;
> + }
> +
> + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0xA30A, NULL);
> + if (pdev) {
> + pci_dev_put(pdev);
> + return true;
> + }

I think this duplicated code should be merged in a for loop on an
array of blacklisted items :)

Cheers,
Benjamin

> +
> + return false;
> +}
> +
> /**
> * ish_probe() - PCI driver probe callback
> * @pdev: pci device
> @@ -110,6 +130,9 @@ static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> struct ish_hw *hw;
> int ret;
>
> + if (ish_invalid_firmware())
> + return -ENODEV;
> +
> /* enable pci dev */
> ret = pci_enable_device(pdev);
> if (ret) {
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2018-07-18 09:54    [W:0.034 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site