lkml.org 
[lkml]   [2018]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm64: zynqmp: Use serdev for zcu100 BT
From
Date
On 11.4.2018 15:16, Michal Simek wrote:
> Mainline started to use serdev interface for uart attached devices.
> Change description to reflect it.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>
> arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 10 ++++------
> 1 file changed, 4 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
> index 3e862a9faf26..c7f713c8e69e 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
> @@ -89,12 +89,6 @@
> gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> };
> -
> - bt_power {
> - label = "bt_power";
> - gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
> - default-state = "on";
> - };
> };
>
> wmmcsdio_fixed: fixedregulator-mmcsdio {
> @@ -267,6 +261,10 @@
>
> &uart0 {
> status = "okay";
> + bluetooth {
> + compatible = "ti,wl1831-st";
> + enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
> + };
> };
>
> &uart1 {
>

Applied.

Thanks,
Michal

--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP SoCs


[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-07-17 16:41    [W:0.033 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site