lkml.org 
[lkml]   [2018]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] spi: spi-fsl-dspi: Fill actual_length when doing DMA transfer
Date
Upper layer users of SPI device drivers may rely on 'actual_length',
so it is important that information is correctly reported. One such
example is spi_mem_exec_op() function that will fail if
'actual_length' of the data transferred is not what was requested. Add
necessary code to populate 'actual_length.

Cc: Mark Brown <broonie@kernel.org>
Cc: Sanchayan Maity <maitysanchayan@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: cphealy@gmail.com
Cc: linux-spi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---

Changes since [v1]

- Patch rebase on for-next branch of SPI sybsytem's git tree

[v1] lkml.kernel.org/r/20180716062508.7726-1-andrew.smirnov@gmail.com

drivers/spi/spi-fsl-dspi.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 89a1e7a4fe5d..9e598642ca66 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -358,6 +358,7 @@ static int dspi_dma_xfer(struct fsl_dspi *dspi)
{
struct fsl_dspi_dma *dma = dspi->dma;
struct device *dev = &dspi->pdev->dev;
+ struct spi_message *message = dspi->cur_msg;
int curr_remaining_bytes;
int bytes_per_buffer;
int ret = 0;
@@ -377,8 +378,10 @@ static int dspi_dma_xfer(struct fsl_dspi *dspi)
goto exit;

} else {
- curr_remaining_bytes -= dma->curr_xfer_len
- * dspi->bytes_per_word;
+ const int len =
+ dma->curr_xfer_len * dspi->bytes_per_word;
+ curr_remaining_bytes -= len;
+ message->actual_length += len;
if (curr_remaining_bytes < 0)
curr_remaining_bytes = 0;
}
--
2.17.1
\
 
 \ /
  Last update: 2018-07-17 06:34    [W:0.035 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site