lkml.org 
[lkml]   [2018]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 04/10] iommu/vt-d: Add second level page table interface
Date
This adds an interface to setup the structures for second
level page table translation type. This includes the types
of second level translation only and pass through.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
---
drivers/iommu/intel-pasid.c | 158 ++++++++++++++++++++++++++++++++++++++++++++
drivers/iommu/intel-pasid.h | 4 ++
include/linux/intel-iommu.h | 1 +
3 files changed, 163 insertions(+)

diff --git a/drivers/iommu/intel-pasid.c b/drivers/iommu/intel-pasid.c
index d6e90cd..da504576 100644
--- a/drivers/iommu/intel-pasid.c
+++ b/drivers/iommu/intel-pasid.c
@@ -9,6 +9,7 @@

#define pr_fmt(fmt) "DMAR: " fmt

+#include <linux/bitops.h>
#include <linux/dmar.h>
#include <linux/intel-iommu.h>
#include <linux/iommu.h>
@@ -291,3 +292,160 @@ void intel_pasid_clear_entry(struct device *dev, int pasid)

pasid_clear_entry(pe);
}
+
+static inline void pasid_set_bits(u64 *ptr, u64 mask, u64 bits)
+{
+ u64 old;
+
+ old = READ_ONCE(*ptr);
+ WRITE_ONCE(*ptr, (old & ~mask) | bits);
+}
+
+/*
+ * Setup the DID(Domain Identifier) field (Bit 64~79) of scalable mode
+ * PASID entry.
+ */
+static inline void
+pasid_set_domain_id(struct pasid_entry *pe, u64 value)
+{
+ pasid_set_bits(&pe->val[1], GENMASK_ULL(15, 0), value);
+}
+
+/*
+ * Setup the SLPTPTR(Second Level Page Table Pointer) field (Bit 12~63)
+ * of a scalable mode PASID entry.
+ */
+static inline void
+pasid_set_address_root(struct pasid_entry *pe, u64 value)
+{
+ pasid_set_bits(&pe->val[0], VTD_PAGE_MASK, value);
+}
+
+/*
+ * Setup the AW(Address Width) field (Bit 2~4) of a scalable mode PASID
+ * entry.
+ */
+static inline void
+pasid_set_address_width(struct pasid_entry *pe, u64 value)
+{
+ pasid_set_bits(&pe->val[0], GENMASK_ULL(4, 2), value << 2);
+}
+
+/*
+ * Setup the PGTT(PASID Granular Translation Type) field (Bit 6~8)
+ * of a scalable mode PASID entry.
+ */
+static inline void
+pasid_set_translation_type(struct pasid_entry *pe, u64 value)
+{
+ pasid_set_bits(&pe->val[0], GENMASK_ULL(8, 6), value << 6);
+}
+
+/*
+ * Enable fault processing by clearing the FPD(Fault Processing
+ * Disable) field (Bit 1) of a scalable mode PASID entry.
+ */
+static inline void pasid_set_fault_enable(struct pasid_entry *pe)
+{
+ pasid_set_bits(&pe->val[0], 1 << 1, 0);
+}
+
+/*
+ * Setup the SRE(Supervisor Request Enable) field (Bit 128) of a
+ * scalable mode PASID entry.
+ */
+static inline void pasid_set_sre(struct pasid_entry *pe)
+{
+ pasid_set_bits(&pe->val[2], 1 << 0, 1);
+}
+
+/*
+ * Setup the P(Present) field (Bit 0) of a scalable mode PASID
+ * entry.
+ */
+static inline void pasid_set_present(struct pasid_entry *pe)
+{
+ pasid_set_bits(&pe->val[0], 1 << 0, 1);
+}
+
+/*
+ * Setup Page Walk Snoop bit (Bit 87) of a scalable mode PASID
+ * entry.
+ */
+static inline void pasid_set_page_snoop(struct pasid_entry *pe, bool value)
+{
+ pasid_set_bits(&pe->val[1], 1 << 23, value);
+}
+
+static inline void
+flush_pasid_cache(struct intel_iommu *iommu, int did, int pasid)
+{
+ struct qi_desc desc;
+
+ desc.high = 0;
+ desc.low = QI_PC_DID(did) | QI_PC_PASID_SEL | QI_PC_PASID(pasid);
+
+ qi_submit_sync(&desc, iommu);
+}
+
+/*
+ * Set up the scalable mode pasid table entry for second only or
+ * passthrough translation type.
+ */
+void intel_pasid_setup_second_level(struct intel_iommu *iommu,
+ struct dmar_domain *domain,
+ struct device *dev, int pasid,
+ bool pass_through)
+{
+ u16 did = domain->iommu_did[iommu->seq_id];
+ struct pasid_entry *pte;
+ struct dma_pte *pgd;
+ u64 pgd_val;
+ int agaw;
+
+ /*
+ * Skip top levels of page tables for iommu which has less agaw
+ * than default. Unnecessary for PT mode.
+ */
+ pgd = domain->pgd;
+ if (!pass_through) {
+ for (agaw = domain->agaw; agaw != iommu->agaw; agaw--) {
+ pgd = phys_to_virt(dma_pte_addr(pgd));
+ if (!dma_pte_present(pgd)) {
+ dev_err(dev, "Invalid domain page table\n");
+ return;
+ }
+ }
+ }
+ pgd_val = pass_through ? 0 : virt_to_phys(pgd);
+
+ pte = intel_pasid_get_entry(dev, pasid);
+ if (!pte) {
+ dev_err(dev, "Failed to get pasid entry of PASID %d\n", pasid);
+ return;
+ }
+
+ pasid_clear_entry(pte);
+ pasid_set_domain_id(pte, did);
+
+ if (!pass_through)
+ pasid_set_address_root(pte, pgd_val);
+
+ pasid_set_address_width(pte, iommu->agaw);
+ pasid_set_translation_type(pte, pass_through ? 4 : 2);
+ pasid_set_fault_enable(pte);
+ pasid_set_page_snoop(pte, !!ecap_smpwc(iommu->ecap));
+
+ /*
+ * Since it is a second level only translation setup, we should
+ * set SRE bit as well (addresses are expected to be GPAs).
+ */
+ pasid_set_sre(pte);
+ pasid_set_present(pte);
+
+ if (!ecap_coherent(iommu->ecap))
+ clflush_cache_range(pte, sizeof(*pte));
+
+ if (cap_caching_mode(iommu->cap))
+ flush_pasid_cache(iommu, did, pasid);
+}
diff --git a/drivers/iommu/intel-pasid.h b/drivers/iommu/intel-pasid.h
index 12f480c..2fe40ff 100644
--- a/drivers/iommu/intel-pasid.h
+++ b/drivers/iommu/intel-pasid.h
@@ -43,5 +43,9 @@ struct pasid_table *intel_pasid_get_table(struct device *dev);
int intel_pasid_get_dev_max_id(struct device *dev);
struct pasid_entry *intel_pasid_get_entry(struct device *dev, int pasid);
void intel_pasid_clear_entry(struct device *dev, int pasid);
+void intel_pasid_setup_second_level(struct intel_iommu *iommu,
+ struct dmar_domain *domain,
+ struct device *dev, int pasid,
+ bool pass_through);

#endif /* __INTEL_PASID_H */
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index 7818b1c..a20ebca 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -115,6 +115,7 @@
* Extended Capability Register
*/

+#define ecap_smpwc(e) (((e) >> 48) & 0x1)
#define ecap_smts(e) (((e) >> 43) & 0x1)
#define ecap_dit(e) ((e >> 41) & 0x1)
#define ecap_pasid(e) ((e >> 40) & 0x1)
--
2.7.4
\
 
 \ /
  Last update: 2018-07-16 09:01    [W:1.175 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site