lkml.org 
[lkml]   [2018]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/5] dt-bindings: fsi: Document binding for the fsi-master-ast-cf "device"
Date
This isn't per-se a real device, it's a pseudo-device that
represents the use of the Aspeed built-in ColdFire to
implement the FSI protocol by bitbanging the GPIOs instead
of doing it from the ARM core.

Thus it's a drop-in replacement for the existing
fsi-master-gpio pseudo-device for use on systems based
on the Aspeed chips. It has most of the same properties,
plus some more needed to operate the coprocessor.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
.../bindings/fsi/fsi-master-ast-cf.txt | 36 +++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt

diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt b/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt
new file mode 100644
index 000000000000..431bf8a423ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt
@@ -0,0 +1,36 @@
+Device-tree bindings for ColdFire offloaded gpio-based FSI master driver
+------------------------------------------------------------------------
+
+Required properties:
+ - compatible =
+ "aspeed,ast2400-cf-fsi-master" for an AST2400 based system
+ or
+ "aspeed,ast2500-cf-fsi-master" for an AST2500 based system
+
+ - clock-gpios = <gpio-descriptor>; : GPIO for FSI clock
+ - data-gpios = <gpio-descriptor>; : GPIO for FSI data signal
+ - enable-gpios = <gpio-descriptor>; : GPIO for enable signal
+ - trans-gpios = <gpio-descriptor>; : GPIO for voltage translator enable
+ - mux-gpios = <gpio-descriptor>; : GPIO for pin multiplexing with other
+ functions (eg, external FSI masters)
+ - memory-region = <phandle>; : Reference to the reserved memory for
+ the ColdFire. Must be 2M aligned on
+ AST2400 and 1M aligned on AST2500
+ - aspeed,sram = <phandle>; : Reference to the SRAM node.
+ - aspeed,cvic = <phandle>; : Reference to the CVIC node.
+
+Examples:
+
+ fsi-master {
+ compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+
+ clock-gpios = <&gpio 0>;
+ data-gpios = <&gpio 1>;
+ enable-gpios = <&gpio 2>;
+ trans-gpios = <&gpio 3>;
+ mux-gpios = <&gpio 4>;
+
+ memory-region = <&coldfire_memory>;
+ sram = <&sram>;
+ cvic = <&cvic>;
+ }
--
2.17.1
\
 
 \ /
  Last update: 2018-07-15 22:05    [W:0.075 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site