Messages in this thread | | | From | Koen Kooi <> | Subject | [PATCH v2 0/2] ARM: dts: am3355: add support for the Sancloud Beaglebone Enhanced | Date | Wed, 11 Jul 2018 09:32:27 +0200 |
| |
The "Beaglebone Enhanced" by Sancloud is based on the Beaglebone Black, but with the following differences:
* Gigabit capable PHY * Extra USB hub, optional i2c control * lps3331ap barometer connected over i2c * MPU6050 6 axis MEMS accelerometer/gyro connected over i2c * 1GiB DDR3 RAM * RTL8723 Wifi/Bluetooth connected over USB
This series adds the Sancloud vendor prefix as well as the actual dts.
v2: * Add missing #include <dt-bindings/interrupt-controller/irq.h> * Fix barometer compatible string v1: Initial submission, not the dts actually tested :/
Koen Kooi (2): dt-bindings: Add vendor prefix for Sancloud ARM: dts: am335x: add am335x-sancloud-bbe board support
.../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am335x-sancloud-bbe.dts | 146 +++++++++++++++++++++ 3 files changed, 148 insertions(+) create mode 100644 arch/arm/boot/dts/am335x-sancloud-bbe.dts
-- 2.0.1
| |