lkml.org 
[lkml]   [2018]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v1 1/4] dmaengine: imx-sdma: add memcpy interface
Date

> -----Original Message-----
> From: Sascha Hauer [mailto:s.hauer@pengutronix.de]
> Sent: 2018年7月11日 14:25
> To: Robin Gong <yibin.gong@nxp.com>
> Cc: vkoul@kernel.org; dan.j.williams@intel.com; shawnguo@kernel.org; Fabio
> Estevam <fabio.estevam@nxp.com>; linux@armlinux.org.uk;
> linux-arm-kernel@lists.infradead.org; kernel@pengutronix.de;
> dmaengine@vger.kernel.org; linux-kernel@vger.kernel.org; dl-linux-imx
> <linux-imx@nxp.com>
> Subject: Re: [PATCH v1 1/4] dmaengine: imx-sdma: add memcpy interface
>
> On Wed, Jul 11, 2018 at 12:23:10AM +0800, Robin Gong wrote:
> > Add MEMCPY support, meanwhile, add SDMA_BD_MAX_CNT instead of
> > '0xffff'.
> >
> > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > ---
> > +static struct dma_async_tx_descriptor *sdma_prep_memcpy(
> > + struct dma_chan *chan, dma_addr_t dma_dst,
> > + dma_addr_t dma_src, size_t len, unsigned long flags) {
> > + struct sdma_channel *sdmac = to_sdma_chan(chan);
> > + struct sdma_engine *sdma = sdmac->sdma;
> > + int channel = sdmac->channel;
> > + size_t count;
> > + int i = 0, param;
> > + struct sdma_buffer_descriptor *bd;
> > + struct sdma_desc *desc;
> > +
> > + if (!chan || !len)
> > + return NULL;
> > +
> > + dev_dbg(sdma->dev, "memcpy: %pad->%pad, len=%zu, channel=%d.\n",
> > + &dma_src, &dma_dst, len, channel);
> > +
> > + desc = sdma_transfer_init(sdmac, DMA_MEM_TO_MEM, len /
> SDMA_BD_MAX_CNT
> > + + 1);
> > + if (!desc)
> > + goto err_out;
> > +
> > + do {
> > + count = min_t(size_t, len, SDMA_BD_MAX_CNT);
>
> When len is bigger than 0xffff you initialize count to 0xffff...
In this case, the data will be split into several bds, for example,
If the total count is 0x10000, two bd used then. One is for 0xffff,
Another is for the last 1
>
> > + bd = &desc->bd[i];
> > + bd->buffer_addr = dma_src;
> > + bd->ext_buffer_addr = dma_dst;
> > + bd->mode.count = count;
> > + desc->chn_count += count;
> > +
> > + switch (sdmac->word_size) {
> > + case DMA_SLAVE_BUSWIDTH_4_BYTES:
> > + bd->mode.command = 0;
> > + if ((count | dma_src | dma_dst) & 3)
> > + goto err_bd_out;
> > + break;
>
> ...In which case you bail out here with an error.
In case dma_src/dma_dst is not align with bus width.
But I'll remove such bus width in v2 as Vinod comments.
>
> Please make sure bigger transfers are working.
>
> > + case DMA_SLAVE_BUSWIDTH_2_BYTES:
> > + bd->mode.command = 2;
> > + if ((count | dma_src | dma_dst) & 1)
> > + goto err_bd_out;
> > + break;
> > + case DMA_SLAVE_BUSWIDTH_1_BYTE:
> > + bd->mode.command = 1;
> > + break;
> > + default:
> > + goto err_bd_out;
> > + }
> > +
> > + dma_src += count;
> > + dma_dst += count;
> > + len -= count;
> > + i++;
> > +
> > + param = BD_DONE | BD_EXTD | BD_CONT;
>
> Probably better readable if you drop BD_CONT here and do a
>
> if (len) {
> param |= BD_CONT;
> } else {
> ...
> }
Okay. Will improve it.
>
> Sascha
>
> --
> Pengutronix e.K. |
> |
> Industrial Linux Solutions |
> https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
> pengutronix.de%2F&amp;data=02%7C01%7Cyibin.gong%40nxp.com%7C0aa96
> 135702b4414dbe708d5e6f709fe%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C
> 0%7C0%7C636668871060103585&amp;sdata=k2h0RIWlujaCs8ioduJsnJAfGW0
> ZS7uzlHMMtjpQ%2Fw4%3D&amp;reserved=0 |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax:
> +49-5121-206917-5555 |
\
 
 \ /
  Last update: 2018-07-11 08:56    [W:0.090 / U:3.844 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site