[lkml]   [2018]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/7] Tegra PMC pinctrl pad configuration
Hi all,

The Tegra Power Management Controller (PMC) can set pad power states
and voltage configuration. This series implements pinctrl interfaces
for configuring said pad properties.

- Add Tegra186 AO_HV pad
- Make the IO pad tables narrower
- Add parens to TEGRA_IO_PAD() and TEGRA_IO_PIN_DESC()
- Fix a typo in the dt-bindings docs
- Remove old pmc pad voltage configuration APIs
- Check return value of tegra_io_pad_find() in

Aapo Vienamo (7):
soc/tegra: pmc: Fix pad voltage configuration for Tegra186
soc/tegra: pmc: Factor out DPD register bit calculation
soc/tegra: pmc: Implement tegra_io_pad_is_powered()
soc/tegra: pmc: Use X macro to generate IO pad tables
dt-bindings: Add Tegra PMC pad configuration bindings
soc/tegra: pmc: Remove public pad voltage APIs
soc/tegra: pmc: Implement pad configuration via pinctrl

.../bindings/arm/tegra/nvidia,tegra186-pmc.txt | 84 ++++
.../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 95 ++++
drivers/soc/tegra/pmc.c | 513 +++++++++++++++------
include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h | 18 +
include/soc/tegra/pmc.h | 15 +-
5 files changed, 583 insertions(+), 142 deletions(-)
create mode 100644 include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h


 \ /
  Last update: 2018-07-11 16:03    [W:0.092 / U:0.768 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site