lkml.org 
[lkml]   [2018]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] dt-bindings: nvmem: Add Spreadtrum SC27XX efuse controller documentation
Date
From: Baolin Wang <baolin.wang@linaro.org>

This patch adds the binding documentation for Spreadtrum SC27XX series
PMICs efuse controller device.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
.../devicetree/bindings/nvmem/sc27xx-efuse.txt | 52 ++++++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt

diff --git a/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt b/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt
new file mode 100644
index 000000000000..586c08286aa9
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt
@@ -0,0 +1,52 @@
+= Spreadtrum SC27XX PMIC eFuse device tree bindings =
+
+Required properties:
+- compatible: Should be one of the following.
+ "sprd,sc2720-efuse"
+ "sprd,sc2721-efuse"
+ "sprd,sc2723-efuse"
+ "sprd,sc2730-efuse"
+ "sprd,sc2731-efuse"
+- reg: Specify the address offset of efuse controller.
+- hwlocks: Reference to a phandle of a hwlock provider node.
+
+= Data cells =
+Are child nodes of eFuse, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+ sc2731_pmic: pmic@0 {
+ compatible = "sprd,sc2731";
+ reg = <0>;
+ spi-max-frequency = <26000000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ efuse@380 {
+ compatible = "sprd,sc2731-efuse";
+ reg = <0x380>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ hwlocks = <&hwlock 12>;
+
+ /* Data cells */
+ thermal_calib: calib@10 {
+ reg = <0x10 0x2>;
+ };
+ };
+ };
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+Example:
+
+ thermal {
+ ...
+ nvmem-cells = <&thermal_calib>;
+ nvmem-cell-names = "calibration";
+ };
--
2.16.2
\
 
 \ /
  Last update: 2018-07-11 12:23    [W:0.071 / U:3.444 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site