lkml.org 
[lkml]   [2018]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 16/17] drm/sun4i: tcon-top: Remove mux configuration at probe time
On Sat, Jul 7, 2018 at 1:51 AM, Jernej Skrabec <jernej.skrabec@siol.net> wrote:
> Now that R40 TCON migrated to runtime mux configuration, old code can be
> removed.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
> drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 81 +++-----------------------
> 1 file changed, 7 insertions(+), 74 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
> index c09b15b64192..78795d6cb174 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
> @@ -87,34 +87,6 @@ int sun8i_tcon_top_de_config(struct device *dev, int mixer, int tcon)
> }
> EXPORT_SYMBOL(sun8i_tcon_top_de_config);
>
> -static int sun8i_tcon_top_get_connected_ep_id(struct device_node *node,
> - int port_id)
> -{
> - struct device_node *ep, *remote, *port;
> - struct of_endpoint endpoint;
> -
> - port = of_graph_get_port_by_id(node, port_id);
> - if (!port)
> - return -ENOENT;
> -
> - for_each_available_child_of_node(port, ep) {
> - remote = of_graph_get_remote_port_parent(ep);
> - if (!remote)
> - continue;
> -
> - if (of_device_is_available(remote)) {
> - of_graph_parse_endpoint(ep, &endpoint);
> -
> - of_node_put(remote);
> -
> - return endpoint.id;
> - }
> -
> - of_node_put(remote);
> - }
> -
> - return -ENOENT;
> -}
>
> static struct clk_hw *sun8i_tcon_top_register_gate(struct device *dev,
> const char *parent,
> @@ -149,11 +121,9 @@ static int sun8i_tcon_top_bind(struct device *dev, struct device *master,
> struct platform_device *pdev = to_platform_device(dev);
> struct clk_hw_onecell_data *clk_data;
> struct sun8i_tcon_top *tcon_top;
> - bool mixer0_unused = false;
> struct resource *res;
> void __iomem *regs;
> - int ret, i, id;
> - u32 val;
> + int ret, i;
>
> tcon_top = devm_kzalloc(dev, sizeof(*tcon_top), GFP_KERNEL);
> if (!tcon_top)
> @@ -198,49 +168,12 @@ static int sun8i_tcon_top_bind(struct device *dev, struct device *master,
> goto err_assert_reset;
> }
>
> - val = 0;
> -
> - /* check if HDMI mux output is connected */
> - if (sun8i_tcon_top_get_connected_ep_id(dev->of_node, 5) >= 0) {
> - /* find HDMI input endpoint id, if it is connected at all*/
> - id = sun8i_tcon_top_get_connected_ep_id(dev->of_node, 4);
> - if (id >= 0)
> - val = FIELD_PREP(TCON_TOP_HDMI_SRC_MSK, id + 1);
> - else
> - DRM_DEBUG_DRIVER("TCON TOP HDMI input is not connected\n");
> - } else {
> - DRM_DEBUG_DRIVER("TCON TOP HDMI output is not connected\n");
> - }
> -
> - writel(val, regs + TCON_TOP_GATE_SRC_REG);
> -
> - val = 0;
> -
> - /* process mixer0 mux output */
> - id = sun8i_tcon_top_get_connected_ep_id(dev->of_node, 1);
> - if (id >= 0) {
> - val = FIELD_PREP(TCON_TOP_PORT_DE0_MSK, id);
> - } else {
> - DRM_DEBUG_DRIVER("TCON TOP mixer0 output is not connected\n");
> - mixer0_unused = true;
> - }
> -
> - /* process mixer1 mux output */
> - id = sun8i_tcon_top_get_connected_ep_id(dev->of_node, 3);
> - if (id >= 0) {
> - val |= FIELD_PREP(TCON_TOP_PORT_DE1_MSK, id);
> -
> - /*
> - * mixer0 mux has priority over mixer1 mux. We have to
> - * make sure mixer0 doesn't overtake TCON from mixer1.
> - */
> - if (mixer0_unused && id == 0)
> - val |= FIELD_PREP(TCON_TOP_PORT_DE0_MSK, 1);
> - } else {
> - DRM_DEBUG_DRIVER("TCON TOP mixer1 output is not connected\n");
> - }
> -
> - writel(val, regs + TCON_TOP_PORT_SEL_REG);
> + /*
> + * Default register values might have some reserved bits set, which
> + * prevents TCON TOP from working properly. Set them to 0 here.
> + */
> + writel(0, regs + TCON_TOP_GATE_SRC_REG);
> + writel(0, regs + TCON_TOP_PORT_SEL_REG);

Would it make sense to just force a reset using the reset control?

ChenYu

\
 
 \ /
  Last update: 2018-07-10 18:09    [W:0.263 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site