lkml.org 
[lkml]   [2018]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 0/4] sun8i: r40: add AHCI
From


于 2018年7月10日 GMT+08:00 下午8:29:22, Maxime Ripard <maxime.ripard@bootlin.com> 写到:
>On Mon, Jul 09, 2018 at 03:20:54PM +0000, Corentin Labbe wrote:
>> Hello
>>
>> With Moeicenowy's agreement, I have take leadership ot this patchset.
>>
>> There are no really changes appart renaming struct quirck to variant.
>>
>> Since the last serie is really old, I will answer comment here.
>> The two regulator (1.2 and 2.5V) are not for the PHY since:
>> - nothing in the schematic said that they are for the PHY, they seems
>> only for controller
>> - all other AHCI driver use 5V for the target/PHY (vs 1.2/2.5 which
>> cannot be used for target)
>
>That's a pretty bad thing to do, especially for old series. You just
>dropped all the context that you reply to, and there's no way for any
>reviewer to tell if your answers make any kind of sense, or addresses
>any question one might have had.
>
>> Furthermore, the AHCI binding support only one regulator per PHY, so
>> using the "target" regulator is out of question for registring this
>two
>> non-phy regulator.
>
>Nothing is "out of question", we have the source code and can change
>it if needed.

The main problem is that he misunderstood the meaning
of target regulator -- it's not for PHY but for disk. And if a
device is designed to accept both 2.5" and 3.5" HDD at
the same port multiple target regulator might really
be useful -- one 5v and one 12v.

>
>Maxime

\
 
 \ /
  Last update: 2018-07-10 14:33    [W:0.233 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site