Messages in this thread | | | Subject | Re: [PATCH v2 0/3] Add clock driver for Actions S700 SoC | From | Parthiban Nallathambi <> | Date | Sun, 1 Jul 2018 20:24:56 +0200 |
| |
Hello Andreas,
On 07/01/2018 08:05 PM, Andreas Färber wrote: > Hi Saravannan, > > Am 28.06.2018 um 21:18 schrieb Saravanan Sekar: >> Changelog v2: >> Fixed 0 day compilation warning >> Modified existing dts Actions S900 clock bindings common to Actions >> Soc family > > Please post v3 without --in-reply-to. It's becoming messy to read. > >> This patchset adds clock support for Actions Semi OWL series S700 SoC >> with relevant clock bindings and device tree info. >> >> Changed the UART clock using CMU instance and changes are tested in >> cubieboard7 > > Did you find any better way of testing than my "reboot bootloader" from > preinstalled Android?
Flashing bootloader.bin and u-boot-dtb.img at below offset trigger the automatic boot from SD. But ADFU needs to long pressed before connecting the power.
sudo dd if=bootloader.bin of=/dev/sdX bs=512 seek=4097 sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1024 seek=3072
With this is place, u-boot expects GPT layout by default. I am able to boot the kernel from FAT/ext by updating the bootcmd/u-boot env accordingly.
I haven't tried flashing/replacing u-boot in eMMC still.
> > In addition to missing Actions Semi you may want to CC Cubietech.
+Added cubitech linux group.
> > Thanks, > Andreas >
-- Thanks, Parthiban N
| |