lkml.org 
[lkml]   [2018]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [virtio-dev] Re: [PATCH v3] virtio_pci: support enabling VFs
On Wed, Jun 06, 2018 at 05:27:07PM +0300, Michael S. Tsirkin wrote:
> On Wed, Jun 06, 2018 at 10:19:43PM +0800, Tiwei Bie wrote:
> > On Wed, Jun 06, 2018 at 03:44:11PM +0300, Michael S. Tsirkin wrote:
> > > On Wed, Jun 06, 2018 at 08:11:54PM +0800, Tiwei Bie wrote:
> > > > On Tue, Jun 05, 2018 at 03:23:11PM +0300, Michael S. Tsirkin wrote:
> > > > > On Tue, Jun 05, 2018 at 09:36:53AM +0800, Tiwei Bie wrote:
> > > > > > On Mon, Jun 04, 2018 at 07:32:25PM +0300, Michael S. Tsirkin wrote:
> > > > > > > On Fri, Jun 01, 2018 at 12:02:39PM +0800, Tiwei Bie wrote:
> > > > > > > > There is a new feature bit allocated in virtio spec to
> > > > > > > > support SR-IOV (Single Root I/O Virtualization):
> > > > > > > >
> > > > > > > > https://github.com/oasis-tcs/virtio-spec/issues/11
> > > > > > > >
> > > > > > > > This patch enables the support for this feature bit in
> > > > > > > > virtio driver.
> > > > > > > >
> > > > > > > > Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
> > > > > > > > ---
> > > > > > >
> > > > > > > OK but what about freeze/restore functions?
> > > > >
> > > > > So for restore, don't you need to restore the
> > > > > sriov capability?
> > > >
> > > > Currently I'm not familiar with the PM part.
> > > > But I still think the sriov capability should
> > > > be handled by PCI core.
> > >
> > > OK but the point is restore looks just like power up for device.
> > >
> > > > I'm trying to understand
> > > > all the relevant code..
> > > > For your question, based on what I found from
> > > > the code currently, I guess the sriov capability
> > > > will be restored by pci_restore_state() which
> > > > will be called by the ops in pci_dev_pm_ops.
> > > > The sriov_restore_state() will be called
> > > > eventually.
> > > >
> > > > Best regards,
> > > > Tiwei Bie
> > >
> > > Right but my point is during resume SRIOV gets enabled first before
> > > driver ok.
> > >
> > > Maybe we should relax the requirements in the spec:
> > > - only require FEATURES_OK from device, not DRIVER_OK from driver
> > > - explain that it only has to happen once, not on each reset,
> > > and driver can remember the result
> >
> > I got your point now! I'd like to relax the
> > requirements in the spec.
> >
> > Best regards,
> > Tiwei Bie
>
> Well the ballot approving your change closed. I think we should apply
> the first chunks reserving the feature bit then, and defer the rest, and
> you can work on new wording documenting the actual behaviour with a new
> github issue to track that - does this make sense?
> Let's do it quickly though - I don't want to bother the
> TC with re-voting the deferral, then the new patch.

Yeah. It makes sense! I think it's a good idea
to reserve the feature bit first and defer the
rest. I'll work on the new wording documenting
the actual behavior with a new github issue to
track it. Thanks a lot!

Best regards,
Tiwei Bie

>
> > >
> > >
> > > >
> > > > >
> > > > >
> > > > > > > I also wonder about kexec - virtio.c currently does:
> > > > > > >
> > > > > > > /* We always start by resetting the device, in case a previous
> > > > > > > * driver messed it up. This also tests that code path a little. */
> > > > > > > dev->config->reset(dev);
> > > > > > >
> > > > > > > Do we need to do something like this for sriov?
> > > > > >
> > > > > > I think VFs are managed by PCI core. Once they are
> > > > > > allocated, virtio driver doesn't have to care too
> > > > > > much about how to manage them. The proposal for the
> > > > > > spec is just to provide a feature bit based virtio
> > > > > > way for virtio drivers to know whether a virtio
> > > > > > device is SR-IOV capable (and virtio drivers can
> > > > > > support configuring SR-IOV based on the feature
> > > > > > bit negotiation result).
> > > > > >
> > > > > > >
> > > > > > > I also wonder whether PCI core should disable sriov for us.
> > > > > > >
> > > > > > >
> > > > > > > I wish there was a patch emulating this without vDPA for QEMU,
> > > > > > > would make it easy to test your patches. Do you happen
> > > > > > > to have something like this?
> > > > > >
> > > > > > Sorry, currently I don't have anything like this..
> > > > > >
> > > > > > Best regards,
> > > > > > Tiwei Bie
> > > > > >
> > > > > > >
> > > > > > > Thanks,
> > > > > > >
> > > > > > >
> > > > > > > > v3:
> > > > > > > > - Drop the acks;
> > > > > > > >
> > > > > > > > v2:
> > > > > > > > - Disable VFs when unbinding the driver (Alex, MST);
> > > > > > > > - Don't use pci_sriov_configure_simple (Alex);
> > > > > > > >
> > > > > > > > drivers/virtio/virtio_pci_common.c | 30 ++++++++++++++++++++++++++++++
> > > > > > > > drivers/virtio/virtio_pci_modern.c | 14 ++++++++++++++
> > > > > > > > include/uapi/linux/virtio_config.h | 7 ++++++-
> > > > > > > > 3 files changed, 50 insertions(+), 1 deletion(-)
> > > > > > > >
> > > > > > > > diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c
> > > > > > > > index 48d4d1cf1cb6..1d4467b2dc31 100644
> > > > > > > > --- a/drivers/virtio/virtio_pci_common.c
> > > > > > > > +++ b/drivers/virtio/virtio_pci_common.c
> > > > > > > > @@ -577,6 +577,8 @@ static void virtio_pci_remove(struct pci_dev *pci_dev)
> > > > > > > > struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
> > > > > > > > struct device *dev = get_device(&vp_dev->vdev.dev);
> > > > > > > >
> > > > > > > > + pci_disable_sriov(pci_dev);
> > > > > > > > +
> > > > > > > > unregister_virtio_device(&vp_dev->vdev);
> > > > > > > >
> > > > > > > > if (vp_dev->ioaddr)
> > > > > > > > @@ -588,6 +590,33 @@ static void virtio_pci_remove(struct pci_dev *pci_dev)
> > > > > > > > put_device(dev);
> > > > > > > > }
> > > > > > > >
> > > > > > > > +static int virtio_pci_sriov_configure(struct pci_dev *pci_dev, int num_vfs)
> > > > > > > > +{
> > > > > > > > + struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
> > > > > > > > + struct virtio_device *vdev = &vp_dev->vdev;
> > > > > > > > + int ret;
> > > > > > > > +
> > > > > > > > + if (!(vdev->config->get_status(vdev) & VIRTIO_CONFIG_S_DRIVER_OK))
> > > > > > > > + return -EBUSY;
> > > > > > > > +
> > > > > > > > + if (!__virtio_test_bit(vdev, VIRTIO_F_SR_IOV))
> > > > > > > > + return -EINVAL;
> > > > > > > > +
> > > > > > > > + if (pci_vfs_assigned(pci_dev))
> > > > > > > > + return -EPERM;
> > > > > > > > +
> > > > > > > > + if (num_vfs == 0) {
> > > > > > > > + pci_disable_sriov(pci_dev);
> > > > > > > > + return 0;
> > > > > > > > + }
> > > > > > > > +
> > > > > > > > + ret = pci_enable_sriov(pci_dev, num_vfs);
> > > > > > > > + if (ret < 0)
> > > > > > > > + return ret;
> > > > > > > > +
> > > > > > > > + return num_vfs;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > static struct pci_driver virtio_pci_driver = {
> > > > > > > > .name = "virtio-pci",
> > > > > > > > .id_table = virtio_pci_id_table,
> > > > > > > > @@ -596,6 +625,7 @@ static struct pci_driver virtio_pci_driver = {
> > > > > > > > #ifdef CONFIG_PM_SLEEP
> > > > > > > > .driver.pm = &virtio_pci_pm_ops,
> > > > > > > > #endif
> > > > > > > > + .sriov_configure = virtio_pci_sriov_configure,
> > > > > > > > };
> > > > > > > >
> > > > > > > > module_pci_driver(virtio_pci_driver);
> > > > > > > > diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c
> > > > > > > > index 2555d80f6eec..07571daccfec 100644
> > > > > > > > --- a/drivers/virtio/virtio_pci_modern.c
> > > > > > > > +++ b/drivers/virtio/virtio_pci_modern.c
> > > > > > > > @@ -153,14 +153,28 @@ static u64 vp_get_features(struct virtio_device *vdev)
> > > > > > > > return features;
> > > > > > > > }
> > > > > > > >
> > > > > > > > +static void vp_transport_features(struct virtio_device *vdev, u64 features)
> > > > > > > > +{
> > > > > > > > + struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> > > > > > > > + struct pci_dev *pci_dev = vp_dev->pci_dev;
> > > > > > > > +
> > > > > > > > + if ((features & BIT_ULL(VIRTIO_F_SR_IOV)) &&
> > > > > > > > + pci_find_ext_capability(pci_dev, PCI_EXT_CAP_ID_SRIOV))
> > > > > > > > + __virtio_set_bit(vdev, VIRTIO_F_SR_IOV);
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > /* virtio config->finalize_features() implementation */
> > > > > > > > static int vp_finalize_features(struct virtio_device *vdev)
> > > > > > > > {
> > > > > > > > struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> > > > > > > > + u64 features = vdev->features;
> > > > > > > >
> > > > > > > > /* Give virtio_ring a chance to accept features. */
> > > > > > > > vring_transport_features(vdev);
> > > > > > > >
> > > > > > > > + /* Give virtio_pci a chance to accept features. */
> > > > > > > > + vp_transport_features(vdev, features);
> > > > > > > > +
> > > > > > > > if (!__virtio_test_bit(vdev, VIRTIO_F_VERSION_1)) {
> > > > > > > > dev_err(&vdev->dev, "virtio: device uses modern interface "
> > > > > > > > "but does not have VIRTIO_F_VERSION_1\n");
> > > > > > > > diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h
> > > > > > > > index 308e2096291f..b7c1f4e7d59e 100644
> > > > > > > > --- a/include/uapi/linux/virtio_config.h
> > > > > > > > +++ b/include/uapi/linux/virtio_config.h
> > > > > > > > @@ -49,7 +49,7 @@
> > > > > > > > * transport being used (eg. virtio_ring), the rest are per-device feature
> > > > > > > > * bits. */
> > > > > > > > #define VIRTIO_TRANSPORT_F_START 28
> > > > > > > > -#define VIRTIO_TRANSPORT_F_END 34
> > > > > > > > +#define VIRTIO_TRANSPORT_F_END 38
> > > > > > > >
> > > > > > > > #ifndef VIRTIO_CONFIG_NO_LEGACY
> > > > > > > > /* Do we get callbacks when the ring is completely used, even if we've
> > > > > > > > @@ -71,4 +71,9 @@
> > > > > > > > * this is for compatibility with legacy systems.
> > > > > > > > */
> > > > > > > > #define VIRTIO_F_IOMMU_PLATFORM 33
> > > > > > > > +
> > > > > > > > +/*
> > > > > > > > + * Does the device support Single Root I/O Virtualization?
> > > > > > > > + */
> > > > > > > > +#define VIRTIO_F_SR_IOV 37
> > > > > > > > #endif /* _UAPI_LINUX_VIRTIO_CONFIG_H */
> > > > > > > > --
> > > > > > > > 2.17.0
> > > > > > >
> > > > > > > ---------------------------------------------------------------------
> > > > > > > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> > > > > > > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
> > > > > > >

\
 
 \ /
  Last update: 2018-06-06 17:08    [W:0.047 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site