[lkml]   [2018]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 4/4] serial: core: Mask mctrl with TIOCM_RTS too if rs485 on and RTS_AFTER_SEND set.
Il 06/06/2018 14:03, Andy Shevchenko ha scritto:
> On Wed, 2018-06-06 at 11:49 +0200, Giulio Benetti wrote:
>> If rs485 is enabled and RTS_AFTER_SEND is set on startup need to keep
>> TIOCM_RTS asserted to keep rs485 transceiver in RX when idle.
>> Check if rs485 is on and RTS_AFTER_SEND is set and mask port->mctrl
>> with
>> TIOCM_RTS too and not only TIOCM_DTR.
> This one feels wrong to be in serial_core.c. Perhaps in 8250/8250*.c.

I've tried to avoid modifying serial_core.c but if it masks mctrl only
with TIOCM_DTR, it forces RTS unasserted.
Another way could be:
If rs485 ON and RTS_AFTER_SEND set, then ignore RTS driving in
8250_set_mctrl, would it make sense?


Giulio Benetti

Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

 \ /
  Last update: 2018-06-06 14:09    [W:0.048 / U:1.068 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site