[lkml]   [2018]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[RFC PATCH 0/3] firmware: Add K3 Support for TISCI driver

The following series enables TI System Control Interface(TISCI) support for
the newest addition in TI's SoC portfolio - AM654 SoC.

The series is an RFC based off next-20180604 and will post formally once
v4.18-rc1 is available.

The series (part 4 of 4) is available here:

Full Boot log is available here:

The Linux development follows closely the 66AK2G SoC model in aarch64 with a
few additions to handle the flexibility of firmware.

The architecture and dts support depends on part 1 of the series:

See AM65x Technical Reference Manual (SPRUID7, April 2018)
for further details:

Nishanth Menon (3):
Documentation: dt: keystone: ti-sci: Add optional host-id parameter
firmware: ti_sci: Provide host-id as an optional dt parameter
arm64: dts: ti: k3-am6: Add Device Management Security Controller

.../devicetree/bindings/arm/keystone/ti,sci.txt | 4 +++
arch/arm64/boot/dts/ti/k3-am6.dtsi | 32 ++++++++++++++++++++++
drivers/firmware/ti_sci.c | 24 +++++++++++++---
3 files changed, 56 insertions(+), 4 deletions(-)


 \ /
  Last update: 2018-06-05 08:27    [W:0.044 / U:2.048 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site