lkml.org 
[lkml]   [2018]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v9 3/7] i2c: fsi: Add port structures
On Mon, Jun 4, 2018 at 10:00 PM, Eddie James <eajames@linux.vnet.ibm.com> wrote:
> Add and initialize I2C adapters for each port on the FSI-attached I2C
> master. Ports for each master are defined in the devicetree.
>
> Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com>
> ---
> drivers/i2c/busses/i2c-fsi.c | 90 ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 90 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
> index e1b183c..12130c3 100644
> --- a/drivers/i2c/busses/i2c-fsi.c
> +++ b/drivers/i2c/busses/i2c-fsi.c
> @@ -17,7 +17,10 @@
> #include <linux/fsi.h>
> #include <linux/i2c.h>
> #include <linux/kernel.h>
> +#include <linux/list.h>
> #include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/slab.h>
>
> #define FSI_ENGID_I2C 0x7
>
> @@ -123,6 +126,14 @@
> struct fsi_i2c_master {
> struct fsi_device *fsi;
> u8 fifo_size;
> + struct list_head ports;
> +};
> +
> +struct fsi_i2c_port {
> + struct list_head list;
> + struct i2c_adapter adapter;
> + struct fsi_i2c_master *master;
> + u16 port;
> };
>
> static int fsi_i2c_read_reg(struct fsi_device *fsi, unsigned int reg,
> @@ -176,9 +187,38 @@ static int fsi_i2c_dev_init(struct fsi_i2c_master *i2c)
> return fsi_i2c_write_reg(i2c->fsi, I2C_FSI_WATER_MARK, &watermark);
> }
>
> +static int fsi_i2c_set_port(struct fsi_i2c_port *port)
> +{
> + int rc;
> + struct fsi_device *fsi = port->master->fsi;
> + u32 mode, dummy = 0;
> +
> + rc = fsi_i2c_read_reg(fsi, I2C_FSI_MODE, &mode);
> + if (rc)
> + return rc;
> +
> + if (FIELD_GET(I2C_MODE_PORT, mode) == port->port)
> + return 0;
> +

> + mode = (mode & ~I2C_MODE_PORT) | FIELD_PREP(I2C_MODE_PORT, port->port);

Did you consider to split this to two lines / assignments?

> + rc = fsi_i2c_write_reg(fsi, I2C_FSI_MODE, &mode);
> + if (rc)
> + return rc;
> +
> + /* reset engine when port is changed */
> + return fsi_i2c_write_reg(fsi, I2C_FSI_RESET_ERR, &dummy);
> +}
> +
> static int fsi_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
> int num)
> {
> + int rc;
> + struct fsi_i2c_port *port = adap->algo_data;
> +
> + rc = fsi_i2c_set_port(port);
> + if (rc)
> + return rc;
> +
> return -EOPNOTSUPP;
> }
>
> @@ -196,23 +236,72 @@ static u32 fsi_i2c_functionality(struct i2c_adapter *adap)
> static int fsi_i2c_probe(struct device *dev)
> {
> struct fsi_i2c_master *i2c;
> + struct fsi_i2c_port *port;
> + struct device_node *np;
> int rc;
> + u32 port_no;
>
> i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
> if (!i2c)
> return -ENOMEM;
>
> i2c->fsi = to_fsi_dev(dev);
> + INIT_LIST_HEAD(&i2c->ports);
>
> rc = fsi_i2c_dev_init(i2c);
> if (rc)
> return rc;
>
> + /* Add adapter for each i2c port of the master. */
> + for_each_available_child_of_node(dev->of_node, np) {
> + rc = of_property_read_u32(np, "reg", &port_no);
> + if (rc || port_no > USHRT_MAX)
> + continue;



> +
> + port = kzalloc(sizeof(*port), GFP_KERNEL);
> + if (!port)
> + break;
> +
> + port->master = i2c;
> + port->port = port_no;
> +
> + port->adapter.owner = THIS_MODULE;
> + port->adapter.dev.of_node = np;
> + port->adapter.dev.parent = dev;
> + port->adapter.algo = &fsi_i2c_algorithm;
> + port->adapter.algo_data = port;
> +
> + snprintf(port->adapter.name, sizeof(port->adapter.name),
> + "i2c_bus-%u", port_no);
> +
> + rc = i2c_add_adapter(&port->adapter);
> + if (rc < 0) {
> + dev_err(dev, "Failed to register adapter: %d\n", rc);
> + kfree(port);
> + continue;
> + }
> +
> + list_add(&port->list, &i2c->ports);
> + }
> +
> dev_set_drvdata(dev, i2c);
>
> return 0;
> }
>
> +static int fsi_i2c_remove(struct device *dev)
> +{
> + struct fsi_i2c_master *i2c = dev_get_drvdata(dev);
> + struct fsi_i2c_port *port;
> +
> + list_for_each_entry(port, &i2c->ports, list) {
> + i2c_del_adapter(&port->adapter);
> + kfree(port);
> + }

Just to be sure, it will be called if and only if all adapters are not
busy. Correct?

> +
> + return 0;
> +}
> +
> static const struct fsi_device_id fsi_i2c_ids[] = {
> { FSI_ENGID_I2C, FSI_VERSION_ANY },
> { 0 }
> @@ -224,6 +313,7 @@ static int fsi_i2c_probe(struct device *dev)
> .name = "i2c-fsi",
> .bus = &fsi_bus_type,
> .probe = fsi_i2c_probe,
> + .remove = fsi_i2c_remove,
> },
> };
>
> --
> 1.8.3.1
>



--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2018-06-04 21:19    [W:0.114 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site