lkml.org 
[lkml]   [2018]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v6 0/2] regulator: add QCOM RPMh regulator driver
Date
This patch series adds a driver and device tree binding documentation for
PMIC regulator control via Resource Power Manager-hardened (RPMh) on some
Qualcomm Technologies, Inc. SoCs such as SDM845. RPMh is a hardware block
which contains several accelerators which are used to manage various
hardware resources that are shared between the processors of the SoC. The
final hardware state of a regulator is determined within RPMh by performing
max aggregation of the requests made by all of the processors.

The RPMh regulator driver depends upon the RPMh driver [1] and command DB
driver [2] which are both still undergoing review. It also depends upon
three recent regulator changes: [3], [4], and [5].

Changes since v5 [6]:
- Removed unused constants
- Added Reviewed-by tag for DT patch 1/2

Changes since v4 [7]:
- Removed support for DT properties qcom,regulator-drms-modes and
qcom,drms-mode-max-microamps
- Specified fixed DRMS high power mode minimum limits for LDO type
regulators
- Removed DRMS support for SMPS and BOB type regulators
- Simplified voltage caching logic

Changes since v3 [8]:
- Removed support for DT properties qcom,regulator-initial-microvolt
and qcom,headroom-microvolt
- Renamed DT property qcom,allowed-drms-modes to be
qcom,regulator-drms-modes
- Updated DT binding documentation to mention which common regulator
bindings can be used for qcom-rpmh-regulator devices
- Added voltage caching so that voltage requests are only sent to RPMh
after the regulator has been enabled at least once
- Changed 'voltage_selector' default value to be -ENOTRECOVERABLE to
interact with [5]
- Initialized 'enabled' to -EINVAL so that unused regulators are
disabled by regulator_late_cleanup()
- Removed rpmh_regulator_load_default_parameters() as it is no longer
needed
- Updated the mode usage description in qcom,rpmh-regulator.h

Changes since v2 [9]:
- Replaced '_' with '-' in device tree supply property names
- Renamed qcom_rpmh-regulator.c to be qcom-rpmh-regulator.c
- Updated various DT property names to use "microvolt" and "microamp"
- Moved allowed modes constraint specification out of the driver [4]
- Replaced rpmh_client with device pointer to match new RPMh API [1]
- Corrected drms mode threshold checking
- Initialized voltage_selector to -EINVAL when not specified in DT
- Added constants for PMIC regulator hardware modes
- Corrected type sign of mode mapping tables
- Made variable names for mode arrays plural
- Simplified Kconfig depends on
- Removed unnecessary constants and struct fields
- Added some descriptive comments

Changes since v1 [10]:
- Addressed review feedback from Doug, Mark, and Stephen
- Replaced set_voltage()/get_voltage() callbacks with set_voltage_sel()/
get_voltage_sel()
- Added set_bypass()/get_bypass() callbacks for BOB pass-through mode
control
- Removed top-level PMIC data structures
- Removed initialization variables from structs and passed them as
function parameters
- Removed various comments and error messages
- Simplified mode handling
- Refactored per-PMIC rpmh-regulator data specification
- Simplified probe function
- Moved header into DT patch
- Removed redundant property listings from DT binding documentation

[1]: https://lkml.org/lkml/2018/5/9/729
[2]: https://lkml.org/lkml/2018/4/10/714
[3]: https://lkml.org/lkml/2018/4/18/556
[4]: https://lkml.org/lkml/2018/5/11/696
[5]: https://lkml.org/lkml/2018/5/15/1005
[6]: https://lkml.org/lkml/2018/6/1/895
[7]: https://lkml.org/lkml/2018/5/22/1168
[8]: https://lkml.org/lkml/2018/5/11/701
[9]: https://lkml.org/lkml/2018/4/13/687
[10]: https://lkml.org/lkml/2018/3/16/1431

David Collins (2):
regulator: dt-bindings: add QCOM RPMh regulator bindings
regulator: add QCOM RPMh regulator driver

.../bindings/regulator/qcom,rpmh-regulator.txt | 160 +++++
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom-rpmh-regulator.c | 767 +++++++++++++++++++++
.../dt-bindings/regulator/qcom,rpmh-regulator.h | 36 +
5 files changed, 973 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
create mode 100644 drivers/regulator/qcom-rpmh-regulator.c
create mode 100644 include/dt-bindings/regulator/qcom,rpmh-regulator.h

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2018-06-04 21:17    [W:0.086 / U:18.824 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site