lkml.org 
[lkml]   [2018]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7] regulator: core: Enable voltage balancing
Date
Call regulator_balance_voltage() instead of set_voltage_rdev()
in set_voltage_unlocked() and in enabling and disabling functions,
but only if the regulator is coupled.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
---
drivers/regulator/core.c | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 2a7ffb7..2dd1f99 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2296,6 +2296,11 @@ int regulator_enable(struct regulator *regulator)
int ret = 0;

pr_err("%s: %d\n", __func__, __LINE__);
+ if (rdev->coupling_desc.n_resolved != rdev->coupling_desc.n_coupled) {
+ rdev_err(rdev, "not all coupled regulators registered\n");
+ return -EPERM;
+ }
+
if (regulator->always_on)
return 0;

@@ -2307,6 +2312,9 @@ int regulator_enable(struct regulator *regulator)

regulator_lock_dependent(rdev);
ret = _regulator_enable(rdev);
+ /* balance only if there are regulators coupled */
+ if (rdev->coupling_desc.n_coupled > 1)
+ regulator_balance_voltage(rdev, PM_SUSPEND_ON);
regulator_unlock_dependent(rdev);

if (ret != 0 && rdev->supply)
@@ -2417,6 +2425,8 @@ int regulator_disable(struct regulator *regulator)

regulator_lock_dependent(rdev);
ret = _regulator_disable(rdev);
+ if (rdev->coupling_desc.n_coupled > 1)
+ regulator_balance_voltage(rdev, PM_SUSPEND_ON);
regulator_unlock_dependent(rdev);

if (ret == 0 && rdev->supply)
@@ -2470,6 +2480,8 @@ int regulator_force_disable(struct regulator *regulator)
regulator_lock_dependent(rdev);
regulator->uA_load = 0;
ret = _regulator_force_disable(regulator->rdev);
+ if (rdev->coupling_desc.n_coupled > 1)
+ regulator_balance_voltage(rdev, PM_SUSPEND_ON);
regulator_unlock_dependent(rdev);

if (rdev->supply)
@@ -3031,7 +3043,16 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
int old_min_uV, old_max_uV;
int current_uV;

+<<<<<<< HEAD
pr_err("%s: %d\n", __func__, __LINE__);
+=======
+ if (rdev->coupling_desc.n_resolved != rdev->coupling_desc.n_coupled) {
+ rdev_err(rdev, "not all coupled regulators registered\n");
+ ret = -EPERM;
+ goto out;
+ }
+
+>>>>>>> fcbf6fa... regulator: core: Enable voltage balancing
/* If we're setting the same range as last time the change
* should be a noop (some cpufreq implementations use the same
* voltage for multiple frequencies, for example).
@@ -3074,7 +3095,8 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
if (ret < 0)
goto out2;

- ret = regulator_set_voltage_rdev(rdev, min_uV, max_uV, state);
+ /* for not coupled regulators this will just set the voltage */
+ ret = regulator_balance_voltage(rdev, state);
if (ret < 0)
goto out2;

--
2.7.4
\
 
 \ /
  Last update: 2018-06-04 16:02    [W:0.203 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site