lkml.org 
[lkml]   [2018]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/8] serial: 8250: Handle case port doesn't have TEMT interrupt using em485.
From
Date
On Mon, 2018-06-04 at 12:50 +0200, Giulio Benetti wrote:
> Hi,
>
> Il 04/06/2018 12:17, Andy Shevchenko ha scritto:
> > On Fri, 2018-06-01 at 14:40 +0200, Giulio Benetti wrote:
> > > Some 8250 ports only have TEMT interrupt, so current
> > > implementation
> > > can't work for ports without it. The only chance to make it work
> > > is to
> > > loop-read on LSR register.
> > >
> > > With NO TEMT interrupt check if both TEMT and THRE are set looping
> > > on
> > > LSR register.
> > > --- a/drivers/tty/serial/8250/8250_dw.c
> > > +++ b/drivers/tty/serial/8250/8250_dw.c
> > > - int ret = serial8250_em485_init(up);
> > > + int ret = serial8250_em485_init(up, false);
> >
> > Is true for all possible DW configured types? Or it's your
> > particular
> > case?
> >
>
> I've checked on Synopsis Designware 8250 datasheet and it's not
> supported.
> Here is datasheet I went through:
> https://linux-sunxi.org/images/d/d2/Dw_apb_uart_db.pdf
>
> There seems not to be TEMT interrupt, I use it under sunxi SoC and on
> their datasheet(A20 for example), they don't report that interrupt
> too.
> So it seems to be valid for all DW configured types, anyway I don't
> know
> how many IP reviews there could be of that peripheral.

This is an excerpt from the document you referred to:

--- 8< --- 8< ---

6 TEMT R Transmitter Empty bit. If in FIFO mode (FIFO_MODE != NONE) and
FIFOs enabled (FCR[0] set to one), this bit is set whenever the
Transmitter Shift Register and the FIFO are both empty. If in non-FIFO
mode or FIFOs are disabled, this bit is set whenever the Transmitter
Holding Register and the Transmitter Shift Register are both empty.

Reset Value: 0x1

--- 8< --- 8< ---


If I'm reading this correctly the support is there. Or otherwise, care
to point exact paragraph needs to be read and checked?

> I've tried to subscribe at Synopsis to obtain latest Datasheet but it
> ask me an active ID I don't have.
>

--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

\
 
 \ /
  Last update: 2018-06-04 13:39    [W:0.087 / U:1.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site