lkml.org 
[lkml]   [2018]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 2/4] dt-bindings: timer: add i.MX EPIT timer binding
Date
From: Clément Peron <clement.peron@devialet.com>

Add devicetree binding document for NXP's i.MX SoC specific
EPIT timer driver.

Signed-off-by: Clément Peron <clement.peron@devialet.com>
---
.../devicetree/bindings/timer/fsl,imxepit.txt | 21 +++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/fsl,imxepit.txt

diff --git a/Documentation/devicetree/bindings/timer/fsl,imxepit.txt b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt
new file mode 100644
index 000000000000..de2e6ef68d24
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt
@@ -0,0 +1,21 @@
+Binding for the i.MX Enhanced Periodic Interrupt Timer (EPIT)
+
+The Enhanced Periodic Interrupt Timer (EPIT) is a 32-bit set-and-forget timer
+that is capable of providing precise interrupts at regular intervals with
+minimal processor intervention.
+
+Required properties:
+- compatible: should be "fsl,<chip>-epit", "fsl,imx31-epit" where <chip> is
+ imx25, imx6qdl, imx6sl, imx6sul or imx6sx.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: Should contain EPIT controller interrupt
+- clocks : The clock provided by the SoC to drive the timer.
+
+Example for i.MX6QDL:
+ epit1: epit@20d0000 {
+ compatible = "fsl,imx6qdl-epit", "fsl,imx31-epit";
+ reg = <0x020d0000 0x4000>;
+ interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_EPIT1>;
+ };
--
2.17.0
\
 
 \ /
  Last update: 2018-06-04 12:06    [W:0.074 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site