Messages in this thread | | | Subject | Re: [PATCH] arm64: dts: stingray: move common board components to stingray-board-base | From | Scott Branden <> | Date | Mon, 4 Jun 2018 15:24:28 -0700 |
| |
Hi Florian,
On 18-06-04 02:09 PM, Florian Fainelli wrote: > On 05/22/2018 11:55 AM, Scott Branden wrote: >> Move common board components from base bcm958742 dtsi file to new >> stingray-board-base dtsi file so they can be shared between many stingray >> boards following common design. >> >> Signed-off-by: Scott Branden <scott.branden@broadcom.com> > > Applied to devicetree-arm64/next, though this did not apply cleanly, > please check the results at: > > https://github.com/Broadcom/stblinux/commit/0b2cf5a855cd235fa95fbdfedfc524a97a71a7fe It's looks fine. > >> --- >> .../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 35 +-------------- >> .../dts/broadcom/stingray/stingray-board-base.dtsi | 51 ++++++++++++++++++++++ >> 2 files changed, 52 insertions(+), 34 deletions(-) >> create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi >> >> diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi >> index cacc25e..d74f6df 100644 >> --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi >> +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi >> @@ -30,20 +30,9 @@ >> * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. >> */ >> >> -#include "stingray.dtsi" >> +#include "stingray-board-base.dtsi" >> >> / { >> - chosen { >> - stdout-path = "serial0:115200n8"; >> - }; >> - >> - aliases { >> - serial0 = &uart1; >> - serial1 = &uart0; >> - serial2 = &uart2; >> - serial3 = &uart3; >> - }; >> - >> sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl { >> compatible = "regulator-gpio"; >> regulator-name = "sdio0_vddo_ctrl_reg"; >> @@ -67,23 +56,6 @@ >> }; >> }; >> >> -&memory { /* Default DRAM banks */ >> - reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */ >> - <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */ >> -}; >> - >> -&mdio_mux_iproc { >> - mdio@10 { >> - gphy0: eth-phy@10 { >> - reg = <0x10>; >> - }; >> - }; >> -}; >> - >> -&uart1 { >> - status = "okay"; >> -}; >> - >> &pwm { >> status = "okay"; >> }; >> @@ -111,8 +83,6 @@ >> }; >> >> &enet { >> - phy-mode = "rgmii-id"; >> - phy-handle = <&gphy0>; >> status = "okay"; >> }; >> >> @@ -133,13 +103,10 @@ >> >> &sdio0 { >> vqmmc-supply = <&sdio0_vddo_ctrl_reg>; >> - non-removable; >> - full-pwr-cycle; >> status = "okay"; >> }; >> >> &sdio1 { >> vqmmc-supply = <&sdio1_vddo_ctrl_reg>; >> - full-pwr-cycle; >> status = "okay"; >> }; >> diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi >> new file mode 100644 >> index 0000000..82a2471 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi >> @@ -0,0 +1,51 @@ >> +// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause) >> +/* >> + * Copyright(c) 2016-2018 Broadcom >> + */ >> + >> +#include "stingray.dtsi" >> +#include <dt-bindings/gpio/gpio.h> >> + >> +/ { >> + aliases { >> + serial0 = &uart1; >> + serial1 = &uart0; >> + serial2 = &uart2; >> + serial3 = &uart3; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> +}; >> + >> +&memory { /* Default DRAM banks */ >> + reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */ >> + <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */ >> +}; >> + >> +&enet { >> + phy-mode = "rgmii-id"; >> + phy-handle = <&gphy0>; >> +}; >> + >> +&uart1 { >> + status = "okay"; >> +}; >> + >> +&sdio0 { >> + non-removable; >> + full-pwr-cycle; >> +}; >> + >> +&sdio1 { >> + full-pwr-cycle; >> +}; >> + >> +&mdio_mux_iproc { >> + mdio@10 { >> + gphy0: eth-phy@10 { >> + reg = <0x10>; >> + }; >> + }; >> +}; >> >
| |