lkml.org 
[lkml]   [2018]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] phy: socionext: add new UniPhier USB PHY driver support
Date
This series adds support for PHY interface built into USB controller
implemented in Socionext UniPhier SoCs.

The USB3 PHY driver supports High-Speed PHY and Super-Speed PHY included in
the USB3 glue layer, and the USB2 PHY driver supports High-Speed PHY
integrated into system controller.

Kunihiko Hayashi (4):
dt-bindings: phy: add DT bindings for UniPhier USB3 PHY driver
phy: socionext: add USB3 PHY driver for UniPhier SoC
dt-bindings: phy: add DT bindings for UniPhier USB2 PHY driver
phy: socionext: add USB2 PHY driver for UniPhier SoC

.../devicetree/bindings/phy/uniphier-usb2-phy.txt | 45 +++
.../devicetree/bindings/phy/uniphier-usb3-phy.txt | 118 ++++++
drivers/phy/Kconfig | 1 +
drivers/phy/Makefile | 1 +
drivers/phy/socionext/Kconfig | 25 ++
drivers/phy/socionext/Makefile | 7 +
drivers/phy/socionext/phy-uniphier-usb2.c | 218 +++++++++++
drivers/phy/socionext/phy-uniphier-usb3hs.c | 422 +++++++++++++++++++++
drivers/phy/socionext/phy-uniphier-usb3ss.c | 369 ++++++++++++++++++
9 files changed, 1206 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/uniphier-usb3-phy.txt
create mode 100644 drivers/phy/socionext/Kconfig
create mode 100644 drivers/phy/socionext/Makefile
create mode 100644 drivers/phy/socionext/phy-uniphier-usb2.c
create mode 100644 drivers/phy/socionext/phy-uniphier-usb3hs.c
create mode 100644 drivers/phy/socionext/phy-uniphier-usb3ss.c

--
2.7.4

\
 
 \ /
  Last update: 2018-06-29 10:40    [W:0.168 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site