lkml.org 
[lkml]   [2018]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] leds: ledtrig-morse: send out morse code
On Thu 2018-06-28 22:29:57, Andreas Klinger wrote:
> Hi Pavel,
>
> Pavel Machek <pavel@ucw.cz> schrieb am Thu, 28. Jun 20:56:
> > Hi!
> >
> > > Send out a morse code by using LEDs.
> > >
> > > This is useful especially on embedded systems without displays to tell the
> > > user about error conditions and status information.
> > >
> > > The trigger will be called "morse"
> > >
> > > The string to be send is written into the file morse_string and sent out
> > > with a workqueue. Supported are letters and digits.
> > >
> > > With the file dot_unit the minimal time unit can be adjusted in
> > > milliseconds.
> > >
> > > Signed-off-by: Andreas Klinger <ak@it-klinger.de>
> >
> > Can we get more general "pattern" trigger? Some LEDs can do that in
> > hardware, and it is more general than plain morse.
> >
> > Ouch and it already was implemented :-). Patch is in attachment.
>
> The idea of the morse trigger is so be able so send out a short error
> code or if needed also a complete sentence. The morse code don't need
> extra explanation to the user. Decoding can be found everywhere.

Yeah, well... I don't think decoding sentences in morse code is going
to be much fun.

And we don't really want encoder in kernel. Just do encoding in
userspace, and use pattern trigger to display it.

For many uses, morse code is "too geeky", and other patterns will be
used.

Like " X " for error 1, " X X " for error 2, " .xX .xX " for
charging, " .xXx. " for everything okay...

> With the pattern trigger one need a translation of the letters and
> numbers into morse code. This is what the morse trigger is doing.
>
> So from my perspective the pattern trigger is something different than
> the morse one.

Well, pattern trigger is more generic, and can do everything morse
trigger can do. Lets do that instead.

> Another question:
> The pattern trigger is not in mainline. Do you know why?

Needs to be resubmitted, I'd say.

Pavel

> > +++ b/Documentation/leds/ledtrig-pattern.txt
> > @@ -0,0 +1,86 @@
> > +LED Pattern Trigger
> > +===================
> > +
> > +This is a LED trigger allowing arbitrary pattern execution. It can do gradual
> > +dimming. This trigger can be configured to repeat the pattern a number of
> > +times or indefinitely. This is intended as a way of communication for embedded
> > +systems with no screen.
> > +
> > +The trigger can be activated from user space on LED class devices as shown
> > +below:
> > +
> > + echo pattern > trigger
> > +
> > +This adds the following sysfs attributes to the LED:
> > +
> > + pattern - specifies the pattern. See syntax below.
> > +
> > + repeat - number of times the pattern must be repeated.
> > + writing -1 to this file will make the pattern
> > + repeat indefinitely.
> > +
> > +The pattern will be restarted each time a new value is written to
> > +the pattern or repeat attribute. When dimming, the LED brightness
> > +is set every 50 ms.
> > +
> > +pattern syntax:
> > +The pattern is specified in the pattern attribute with an array of comma-
> > +separated "brightness/length in miliseconds" values. The two components
> > +of each value are to be separated by a space.
> > +
> > +For example, assuming the driven LED supports
> > +intensity value from 0 to 255:
> > +
> > + echo 0 1000, 255 2000 > pattern
> > +
> > +Or:
> > +
> > + echo 0 1000, 255 2000, > pattern
> > +
> > +Will make the LED go gradually from zero-intensity to max (255) intensity
> > +in 1000 milliseconds, then back to zero intensity in 2000 milliseconds:
> > +
> > +LED brightness
> > + ^
> > +255-| / \ / \ /
> > + | / \ / \ /
> > + | / \ / \ /
> > + | / \ / \ /
> > + 0-| / \/ \/
> > + +---0----1----2----3----4----5----6------------> time (s)
> > +
> > +
> > +
> > +To make the LED go instantly from one brigntess value to another,
> > +use zero-time lengths. For example:
> > +
> > + echo 0 1000, 0 0, 255 2000, 255 0 > pattern
> > +
> > +Will make the LED stay off for one second, then stay at max brightness
> > +for two seconds:
> > +
> > +LED brightness
> > + ^
> > +255-| +---------+ +---------+
> > + | | | | |
> > + | | | | |
> > + | | | | |
> > + 0-| -----+ +----+ +----
> > + +---0----1----2----3----4----5----6------------> time (s)
> > +

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-06-28 22:46    [W:0.084 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site