lkml.org 
[lkml]   [2018]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [[LINUX PATCH v10] 2/4] memory: pl353: Add driver for arm pl353 static memory controller
Date
Sorry for the wrong name.

> -----Original Message-----
> From: Naga Sureshkumar Relli [mailto:nagasure@xilinx.com]
> Sent: Thursday, June 28, 2018 5:41 PM
> To: Linus Walleij <linus.walleij@linaro.org>
> Cc: Boris Brezillon <boris.brezillon@bootlin.com>; Richard Weinberger <richard@nod.at>;
> David Woodhouse <dwmw2@infradead.org>; Brian Norris
> <computersforpeace@gmail.com>; Mark Vasut <marek.vasut@gmail.com>; Florian Fainelli
> <f.fainelli@gmail.com>; Markus Mayer <mmayer@broadcom.com>; Roger Quadros
> <rogerq@ti.com>; Ladislav Michl <ladis@linux-mips.org>; ada@thorsis.com;
> honghui.zhang@mediatek.com; Miquèl Raynal <miquel.raynal@bootlin.com>; linux-
> mtd@lists.infradead.org; linux-kernel@vger.kernel.org; nagasureshkumarrelli@gmail.com;
> Michal Simek <michals@xilinx.com>
> Subject: RE: [[LINUX PATCH v10] 2/4] memory: pl353: Add driver for arm pl353 static
> memory controller
>
> Hi Linux,
Linus.
>
> Thanks for the review.
>
> > -----Original Message-----
> > From: Linus Walleij [mailto:linus.walleij@linaro.org]
> > Sent: Thursday, June 28, 2018 12:19 PM
> > To: Naga Sureshkumar Relli <nagasure@xilinx.com>
> > Cc: Boris Brezillon <boris.brezillon@bootlin.com>; Richard Weinberger
> > <richard@nod.at>; David Woodhouse <dwmw2@infradead.org>; Brian Norris
> > <computersforpeace@gmail.com>; Mark Vasut <marek.vasut@gmail.com>;
> > Florian Fainelli <f.fainelli@gmail.com>; Markus Mayer
> > <mmayer@broadcom.com>; Roger Quadros <rogerq@ti.com>; Ladislav Michl
> > <ladis@linux-mips.org>; ada@thorsis.com; honghui.zhang@mediatek.com;
> > Miquèl Raynal <miquel.raynal@bootlin.com>; linux-
> > mtd@lists.infradead.org; linux-kernel@vger.kernel.org;
> > nagasureshkumarrelli@gmail.com; Michal Simek <michals@xilinx.com>
> > Subject: Re: [[LINUX PATCH v10] 2/4] memory: pl353: Add driver for arm
> > pl353 static memory controller
> >
> > On Thu, Jun 21, 2018 at 8:43 AM Naga Sureshkumar Relli
> > <naga.sureshkumar.relli@xilinx.com> wrote:
> >
> > > Add driver for arm pl353 static memory controller. This controller
> > > is used in Xilinx Zynq SoC for interfacing the NAND and NOR/SRAM memory devices.
> > >
> > > Signed-off-by: Naga Sureshkumar Relli
> > > <naga.sureshkumar.relli@xilinx.com>
> >
> > (...)
> >
> > > +config PL353_SMC
> > > + tristate "ARM PL35X Static Memory Controller(SMC) driver"
> > > + default y
> > > + depends on ARM
> > > + depends on ARCH_ZYNQ
> >
> > depends on ARM_AMBA
> Ok. I will add it next version.
> >
> > > +#include <linux/platform_device.h>
> >
> > This is a PrimeCell with the ARM primecell ID registers specified, so
> > it should not use platform device.
> Thanks for pointing these drivers. Let me go through these.
>
> >
> > Use <linux/amba/bus.h>
> >
> > It further needs to match on these magic values (found in
> > 0xfe0 etc) and use the name "apb_pclk" for the peripheral
> > (silicon) clock.
> >
> > See examples such as:
> > drivers/mmc/host/mmci.c
> > drivers/tty/serial/amba-pl011.c
> > drivers/video/fbdev/amba-clcd.c
> > drivers/hwtracing/coresight/*
> > etc for examples.
> >
> > Also see and reference the special PrimeCell DT bindings:
> > Documentation/devicetree/bindings/arm/primecell.txt
> Ok. I will go through these bindings once.
> >
> > Yours,
> > Linus Walleij
>
> Thank for your review.
>
> Regards,
> Naga Sureshkumar Relli.
\
 
 \ /
  Last update: 2018-06-28 14:12    [W:0.076 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site