lkml.org 
[lkml]   [2018]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectApplied "ASoC: dpcm: improve runtime update predictability" to the asoc tree
Date
The patch

ASoC: dpcm: improve runtime update predictability

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From de15d7ff5bef98746fcb76a0db7ac46de48d3560 Mon Sep 17 00:00:00 2001
From: Jerome Brunet <jbrunet@baylibre.com>
Date: Tue, 26 Jun 2018 12:07:25 +0200
Subject: [PATCH] ASoC: dpcm: improve runtime update predictability

As it is, dpcm_runtime_update() performs the old path and new path
update of a frontend before going on to the next frontend DAI.
Depending the order of the FEs within the rtd list, the result of
the update might be different.

For example:
* Frontend A connected to backend C, with a 48kHz playback
* Frontend B connected to backend D, with a 44.1kHz playback
* FE A appears before FE B in the rtd list of the card.

If we reparent BE C to FE B (disconnecting BE D):
* old path update of FE A will run first, and BE C will get hw_free()
and shutdown()
* new path update of FE B will run after and BE C, which is stopped,
so it will be configured at 44.1kHz, as expected

If we reparent BE D to FE A (disconnecting BE C):
* new path update of FE A will run first but since BE D is still running
at 44.1kHz, it won't be reconfigured (no call to startup() or
hw_params())
* old path update of FE B runs after, nothing happens
* In this case, we end up with a BE playing at 44.1kHz a stream which is
supposed to be played at 48Khz (too slow)

To improve this situation, this patch performs all the FE old paths update
before going on to update the new paths. With this, the result should
no longer depend on the order of the FE within the card rtd list.

Please note that there might be a small performance penalty since
dpcm_process_paths() is called twice per stream direction.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/soc-pcm.c | 165 +++++++++++++++++++++++---------------------
1 file changed, 86 insertions(+), 79 deletions(-)

diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 19ebfc958b9d..63f96cde046a 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -2597,106 +2597,113 @@ static int dpcm_run_old_update(struct snd_soc_pcm_runtime *fe, int stream)
return ret;
}

-/* Called by DAPM mixer/mux changes to update audio routing between PCMs and
- * any DAI links.
- */
-int soc_dpcm_runtime_update(struct snd_soc_card *card)
+static int soc_dpcm_fe_runtime_update(struct snd_soc_pcm_runtime *fe, int new)
{
- struct snd_soc_pcm_runtime *fe;
- int old, new, paths;
+ struct snd_soc_dapm_widget_list *list;
+ int count, paths;

- mutex_lock_nested(&card->mutex, SND_SOC_CARD_CLASS_RUNTIME);
- list_for_each_entry(fe, &card->rtd_list, list) {
- struct snd_soc_dapm_widget_list *list;
+ if (!fe->dai_link->dynamic)
+ return 0;

- /* make sure link is FE */
- if (!fe->dai_link->dynamic)
- continue;
+ /* only check active links */
+ if (!fe->cpu_dai->active)
+ return 0;

- /* only check active links */
- if (!fe->cpu_dai->active)
- continue;
+ /* DAPM sync will call this to update DSP paths */
+ dev_dbg(fe->dev, "ASoC: DPCM %s runtime update for FE %s\n",
+ new ? "new" : "old", fe->dai_link->name);

- /* DAPM sync will call this to update DSP paths */
- dev_dbg(fe->dev, "ASoC: DPCM runtime update for FE %s\n",
- fe->dai_link->name);
+ /* skip if FE doesn't have playback capability */
+ if (!fe->cpu_dai->driver->playback.channels_min ||
+ !fe->codec_dai->driver->playback.channels_min)
+ goto capture;

- /* skip if FE doesn't have playback capability */
- if (!fe->cpu_dai->driver->playback.channels_min
- || !fe->codec_dai->driver->playback.channels_min)
- goto capture;
-
- /* skip if FE isn't currently playing */
- if (!fe->cpu_dai->playback_active
- || !fe->codec_dai->playback_active)
- goto capture;
-
- paths = dpcm_path_get(fe, SNDRV_PCM_STREAM_PLAYBACK, &list);
- if (paths < 0) {
- dev_warn(fe->dev, "ASoC: %s no valid %s path\n",
- fe->dai_link->name, "playback");
- mutex_unlock(&card->mutex);
- return paths;
- }
+ /* skip if FE isn't currently playing */
+ if (!fe->cpu_dai->playback_active || !fe->codec_dai->playback_active)
+ goto capture;

- /* update any new playback paths */
- new = dpcm_process_paths(fe, SNDRV_PCM_STREAM_PLAYBACK, &list, 1);
- if (new) {
- dpcm_run_new_update(fe, SNDRV_PCM_STREAM_PLAYBACK);
- dpcm_clear_pending_state(fe, SNDRV_PCM_STREAM_PLAYBACK);
- dpcm_be_disconnect(fe, SNDRV_PCM_STREAM_PLAYBACK);
- }
+ paths = dpcm_path_get(fe, SNDRV_PCM_STREAM_PLAYBACK, &list);
+ if (paths < 0) {
+ dev_warn(fe->dev, "ASoC: %s no valid %s path\n",
+ fe->dai_link->name, "playback");
+ return paths;
+ }

- /* update any old playback paths */
- old = dpcm_process_paths(fe, SNDRV_PCM_STREAM_PLAYBACK, &list, 0);
- if (old) {
+ /* update any playback paths */
+ count = dpcm_process_paths(fe, SNDRV_PCM_STREAM_PLAYBACK, &list, new);
+ if (count) {
+ if (new)
+ dpcm_run_new_update(fe, SNDRV_PCM_STREAM_PLAYBACK);
+ else
dpcm_run_old_update(fe, SNDRV_PCM_STREAM_PLAYBACK);
- dpcm_clear_pending_state(fe, SNDRV_PCM_STREAM_PLAYBACK);
- dpcm_be_disconnect(fe, SNDRV_PCM_STREAM_PLAYBACK);
- }

- dpcm_path_put(&list);
+ dpcm_clear_pending_state(fe, SNDRV_PCM_STREAM_PLAYBACK);
+ dpcm_be_disconnect(fe, SNDRV_PCM_STREAM_PLAYBACK);
+ }
+
+ dpcm_path_put(&list);
+
capture:
- /* skip if FE doesn't have capture capability */
- if (!fe->cpu_dai->driver->capture.channels_min
- || !fe->codec_dai->driver->capture.channels_min)
- continue;
+ /* skip if FE doesn't have capture capability */
+ if (!fe->cpu_dai->driver->capture.channels_min ||
+ !fe->codec_dai->driver->capture.channels_min)
+ return 0;

- /* skip if FE isn't currently capturing */
- if (!fe->cpu_dai->capture_active
- || !fe->codec_dai->capture_active)
- continue;
+ /* skip if FE isn't currently capturing */
+ if (!fe->cpu_dai->capture_active || !fe->codec_dai->capture_active)
+ return 0;

- paths = dpcm_path_get(fe, SNDRV_PCM_STREAM_CAPTURE, &list);
- if (paths < 0) {
- dev_warn(fe->dev, "ASoC: %s no valid %s path\n",
- fe->dai_link->name, "capture");
- mutex_unlock(&card->mutex);
- return paths;
- }
+ paths = dpcm_path_get(fe, SNDRV_PCM_STREAM_CAPTURE, &list);
+ if (paths < 0) {
+ dev_warn(fe->dev, "ASoC: %s no valid %s path\n",
+ fe->dai_link->name, "capture");
+ return paths;
+ }

- /* update any new capture paths */
- new = dpcm_process_paths(fe, SNDRV_PCM_STREAM_CAPTURE, &list, 1);
- if (new) {
+ /* update any old capture paths */
+ count = dpcm_process_paths(fe, SNDRV_PCM_STREAM_CAPTURE, &list, new);
+ if (count) {
+ if (new)
dpcm_run_new_update(fe, SNDRV_PCM_STREAM_CAPTURE);
- dpcm_clear_pending_state(fe, SNDRV_PCM_STREAM_CAPTURE);
- dpcm_be_disconnect(fe, SNDRV_PCM_STREAM_CAPTURE);
- }
-
- /* update any old capture paths */
- old = dpcm_process_paths(fe, SNDRV_PCM_STREAM_CAPTURE, &list, 0);
- if (old) {
+ else
dpcm_run_old_update(fe, SNDRV_PCM_STREAM_CAPTURE);
- dpcm_clear_pending_state(fe, SNDRV_PCM_STREAM_CAPTURE);
- dpcm_be_disconnect(fe, SNDRV_PCM_STREAM_CAPTURE);
- }

- dpcm_path_put(&list);
+ dpcm_clear_pending_state(fe, SNDRV_PCM_STREAM_CAPTURE);
+ dpcm_be_disconnect(fe, SNDRV_PCM_STREAM_CAPTURE);
}

- mutex_unlock(&card->mutex);
+ dpcm_path_put(&list);
+
return 0;
}
+
+/* Called by DAPM mixer/mux changes to update audio routing between PCMs and
+ * any DAI links.
+ */
+int soc_dpcm_runtime_update(struct snd_soc_card *card)
+{
+ struct snd_soc_pcm_runtime *fe;
+ int ret = 0;
+
+ mutex_lock_nested(&card->mutex, SND_SOC_CARD_CLASS_RUNTIME);
+ /* shutdown all old paths first */
+ list_for_each_entry(fe, &card->rtd_list, list) {
+ ret = soc_dpcm_fe_runtime_update(fe, 0);
+ if (ret)
+ goto out;
+ }
+
+ /* bring new paths up */
+ list_for_each_entry(fe, &card->rtd_list, list) {
+ ret = soc_dpcm_fe_runtime_update(fe, 1);
+ if (ret)
+ goto out;
+ }
+
+out:
+ mutex_unlock(&card->mutex);
+ return ret;
+}
int soc_dpcm_be_digital_mute(struct snd_soc_pcm_runtime *fe, int mute)
{
struct snd_soc_dpcm *dpcm;
--
2.18.0.rc2
\
 
 \ /
  Last update: 2018-06-28 12:21    [W:0.076 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site