lkml.org 
[lkml]   [2018]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/6] Documentation: DT: Consolidate SP805 binding docs
On Wed, Jun 20, 2018 at 10:39:16AM -0700, Ray Jui wrote:
> Hi Guenter/Rob,
>
> Kindly let me know how you want to proceed with this?
>

If I recall correctly, the patch series does not add a new problem
but merely exposes one. Is my recollection correct ? If so, maybe
we should just add a note somewhere indicating what might be wrong
and otherwise apply the series.

Does this make sense ?

Guenter

> Thanks,
>
> Ray
>
> On 6/6/2018 4:39 PM, Ray Jui wrote:
> >
> >
> >On 6/6/2018 9:33 AM, Rob Herring wrote:
> >>On Wed, Jun 6, 2018 at 11:19 AM, Guenter Roeck <linux@roeck-us.net>
> >>wrote:
> >>>On 06/05/2018 12:41 PM, Rob Herring wrote:
> >>>>
> >>>>On Mon, May 28, 2018 at 11:01:32AM -0700, Ray Jui wrote:
> >>>>>
> >>>>>Consolidate two SP805 binding documents "arm,sp805.txt" and
> >>>>>"sp805-wdt.txt" into "arm,sp805.txt" that matches the naming of the
> >>>>>desired compatible string to be used
> >>>>>
> >>>>>Signed-off-by: Ray Jui <ray.jui@broadcom.com>
> >>>>>---
> >>>>>   .../devicetree/bindings/watchdog/arm,sp805.txt     | 27
> >>>>>++++++++++++++-----
> >>>>>   .../devicetree/bindings/watchdog/sp805-wdt.txt     | 31
> >>>>>----------------------
> >>>>>   2 files changed, 20 insertions(+), 38 deletions(-)
> >>>>>   delete mode 100644
> >>>>>Documentation/devicetree/bindings/watchdog/sp805-wdt.txt
> >>>>
> >>>>
> >>>>Would be good to get a ACK from FSL/NXP person on this. It looks to me
> >>>>like the driver fetches the wrong clock as it gets the first one and
> >>>>the
> >>>>driver really wants 'wdog_clk'. In any case, their dts files should be
> >>>>updated.
> >>>>
> >>>
> >>>This is really confusing, since he deleted file lists apb_pclk first.
> >>>Does the watchdog driver need apb_pclk or wdog_clk ? That isn't clear
> >>>to me.
> >>>arch/arm64/boot/dts/hisilicon/hi3660.dtsi only provides apb_pclk, or at
> >>>least
> >>>it says so.
> >>
> >>Note that that clock source is 32KHz. That is obviously a mistake
> >>because no one clocks their bus/register interface at 32KHz. Someone
> >>just filled in something that happened to work.
> >>
> >>>The fsl dts files all have apb_pclk first.
> >>
> >>It's all kind of a mess, but fortunately one we should be able to
> >>clean-up.
> >>
> >
> >It is indeed a mess. Note the SP805 driver only derive one clock from DT,
> >and that's not done based on name. As a result, the first clock defined in
> >DT will be fetched and the rate calculation will be carried out based on
> >that clock rate.
> >
> >I assumed the clock entries and their names defined in the binding
> >document are just placeholders, at least for the 2nd clock.
> >
> >Based on how the current driver is, the first clock needs to be the
> >WDOGCLK for things to work properly.
> >
> >According to the SP805 TRM, APB clock is the PCLK, that drives the bus for
> >register access.
> >
> >The relationship between WDOGCLK and PCLK is defined as:
> >
> >- the rising edges of WDOGCLK must be synchronous and
> >balanced with a rising edge of PCLK
> >
> >- the WDOGCLK frequency cannot be greater than the PCLK
> >frequency
> >
> >>The compatible string changes too, but AMBA bus devices don't actually
> >>use the compatible string as they use the ID registers to match. I
> >>suppose some other OS could do things differently. Worth the risk to
> >>clean-up IMO.
> >>
> >>>
> >>>Either case, why are two clocks asked for in the first place ? Are there
> >>>situations where the second clock is actually used/useful ?
> >>
> >>For clocks, the bus needs "apb_pclk" and the driver just gets the
> >>first clock. The driver is obviously going to want the functional
> >>clock that determines the counter rate. That should
> >>
> >>Primecell peripherals are about the only ones that have clear specs
> >>WRT clock inputs. Yet we've still managed to screw them up. There are
> >>2 clocks in the spec, so the DT has (or should have) 2 clocks.
> >>
> >>Rob
> >>
> >
> >Let me know how you guys want to proceed with this?
> >
> >Thanks,
> >
> >Ray
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

\
 
 \ /
  Last update: 2018-06-27 20:35    [W:0.096 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site