lkml.org 
[lkml]   [2018]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] eeprom: at24: Add support for address-width property
Date
From: "alanx.chiang" <alanx.chiang@intel.com>

Provide a flexible way to determine the addressing bits of eeprom.
Pass the addressing bits to driver through address-width property.

Signed-off-by: Alan Chiang <alanx.chiang@intel.com>
Signed-off-by: Andy Yeh <andy.yeh@intel.com>

---
since v1
-- Add a warn message for 8-bit addressing.

---
drivers/misc/eeprom/at24.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 0c125f2..231afcd 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -478,6 +478,22 @@ static void at24_properties_to_pdata(struct device *dev,
if (device_property_present(dev, "no-read-rollover"))
chip->flags |= AT24_FLAG_NO_RDROL;

+ err = device_property_read_u32(dev, "address-width", &val);
+ if (!err) {
+ switch (val) {
+ case 8:
+ chip->flags &= ~AT24_FLAG_ADDR16;
+ dev_warn(dev, "address-width is 8, clear the ADD16 bit\n");
+ break;
+ case 16:
+ chip->flags |= AT24_FLAG_ADDR16;
+ break;
+ default:
+ dev_warn(dev, "Bad \"address-width\" property: %u\n",
+ val);
+ }
+ }
+
err = device_property_read_u32(dev, "size", &val);
if (!err)
chip->byte_len = val;
--
2.7.4
\
 
 \ /
  Last update: 2018-06-26 08:23    [W:0.782 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site