Messages in this thread | | | Subject | Re: [PATCH 3/9] ARM: davinci: da850-evm: use aemif platform driver in legacy mode | From | David Lechner <> | Date | Mon, 25 Jun 2018 11:04:20 -0500 |
| |
On 06/25/2018 10:29 AM, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bgolaszewski@baylibre.com> > > We now support board files in the aemif driver. Register a platform > device instead of using the handcrafted API in da850-evm. > > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> > --- > arch/arm/mach-davinci/board-da850-evm.c | 93 ++++++++++++++----------- > 1 file changed, 51 insertions(+), 42 deletions(-) > > diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c > index 442c16773f09..0ae7c47ed2b0 100644 > --- a/arch/arm/mach-davinci/board-da850-evm.c > +++ b/arch/arm/mach-davinci/board-da850-evm.c > @@ -33,6 +33,7 @@ > #include <linux/platform_data/gpio-davinci.h> > #include <linux/platform_data/mtd-davinci.h> > #include <linux/platform_data/mtd-davinci-aemif.h> > +#include <linux/platform_data/ti-aemif.h>
alphabetical order would be after spi-davinci.h
> #include <linux/platform_data/spi-davinci.h> > #include <linux/platform_data/uio_pruss.h> > #include <linux/regulator/machine.h>
> @@ -266,37 +257,58 @@ static struct resource da850_evm_nandflash_resource[] = { > }, > }; > > -static struct platform_device da850_evm_nandflash_device = { > - .name = "davinci_nand", > - .id = 1, > - .dev = { > - .platform_data = &da850_evm_nandflash_data, > - }, > - .num_resources = ARRAY_SIZE(da850_evm_nandflash_resource), > - .resource = da850_evm_nandflash_resource, > +static struct resource da850_evm_aemif_resource[] = { > + { > + .start = DA8XX_AEMIF_CTL_BASE, > + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K, > + .flags = IORESOURCE_MEM, > + } > }; > > -static struct platform_device *da850_evm_devices[] = { > - &da850_evm_nandflash_device, > - &da850_evm_norflash_device, > +static struct aemif_abus_data da850_evm_aemif_abus_data[] = { > + { > + .cs = 3, > + } > }; > > -#define DA8XX_AEMIF_CE2CFG_OFFSET 0x10 > -#define DA8XX_AEMIF_ASIZE_16BIT 0x1 > - > -static void __init da850_evm_init_nor(void) > -{ > - void __iomem *aemif_addr; > - > - aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K); > +static struct platform_device da850_evm_aemif_devices[] = { > + { > + .name = "davinci_nand", > + .id = 1,
The existing clock lookup is for "davinci_nand.0". Might need to change id here.
> + .dev = { > + .platform_data = &da850_evm_nandflash_data, > + }, > + .num_resources = ARRAY_SIZE(da850_evm_nandflash_resource), > + .resource = da850_evm_nandflash_resource, > + }, > + { > + .name = "physmap-flash", > + .id = 0, > + .dev = { > + .platform_data = &da850_evm_norflash_data, > + }, > + .num_resources = 1, > + .resource = da850_evm_norflash_resource, > + } > +}; > > - /* Configure data bus width of CS2 to 16 bit */ > - writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) | > - DA8XX_AEMIF_ASIZE_16BIT, > - aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET); > +static struct aemif_platform_data da850_evm_aemif_pdata = { > + .cs_offset = 2, > + .abus_data = da850_evm_aemif_abus_data, > + .num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data), > + .sub_devices = da850_evm_aemif_devices, > + .num_sub_devices = ARRAY_SIZE(da850_evm_aemif_devices), > +}; > > - iounmap(aemif_addr); > -} > +static struct platform_device da850_evm_aemif_device = { > + .name = "ti-aemif", > + .dev = { > + .platform_data = &da850_evm_aemif_pdata, > + }, > + .resource = da850_evm_aemif_resource, > + .num_resources = ARRAY_SIZE(da850_evm_aemif_resource), > + .id = -1, > +}; > > static const short da850_evm_nand_pins[] = { > DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
| |