lkml.org 
[lkml]   [2018]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 1/2] dt-binding: hwmon: Add NPCM7xx PWM and Fan controller documentation
Date
Added device tree binding documentation for Nuvoton BMC
NPCM7xx Pulse Width Modulation (PWM) and Fan tach controller.
The PWM controller can support upto 8 PWM output ports.
The Fan tach controller can support upto 16 tachometer inputs.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
---
.../devicetree/bindings/hwmon/npcm750-pwm-fan.txt | 84 ++++++++++++++++++++++
1 file changed, 84 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt

diff --git a/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt
new file mode 100644
index 000000000000..a9eacda34f92
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt
@@ -0,0 +1,84 @@
+Nuvoton NPCM7xx PWM and Fan Tacho controller device driver
+
+The NPCM7xx has two identical Pulse-width modulation (PWM) controller modules,
+Each PWM module has four PWM controller outputs, Totally 8 PWM controller outputs.
+
+The NPCM7xx has eight identical Fan tachometer controller modules,
+Each Fan module has two Fan controller inputs, Totally 16 Fan controller inputs.
+
+Required properties for pwm-fan node:
+- compatible : "nuvoton,npcm750-pwm-fan" for Poleg NPCM7XX.
+- reg : specifies physical base address and size of the registers.
+- reg-names : must contain:
+ * "pwm-base" for the PWM registers.
+ * "fan-base" for the Fan registers.
+- clocks : phandle of reference clocks.
+- clock-names : must contain
+ * "clk_apb3" for clock of PWM controller.
+ * "clk_apb4" for clock of Fan controller.
+- interrupts : contain the Fan interrupts with flags for falling edge.
+- pinctrl-names : a pinctrl state named "default" must be defined.
+- pinctrl-0 : phandle referencing pin configuration of the PWM and Fan
+ controller ports.
+
+pwm subnode format:
+===================
+Under pwm subnode can be upto 8 child nodes, each child node representing a PWM channel.
+Each pwm subnode must have one PWM channel and atleast one Fan tach channel.
+
+For PWM channel can be configured cooling-levels to create cooling device.
+Cooling device could be bound to a thermal zone for the thermal control.
+
+Required properties for each child node:
+- pwm-ch : specify the PWM output channel.
+ integer value in the range 0 through 7, that represent
+ the PWM channel number that used.
+
+- fan-ch : specify the Fan input channel.
+ integer value in the range 0 through 15, that represent
+ the Fan channel number that used.
+
+ At least one Fan tach input channel is required
+
+Optional property for each child node:
+- cooling-levels: PWM duty cycle values in a range from 0 to 255
+ which correspond to thermal cooling states.
+
+Examples:
+
+pwm_fan:pwm_fan_controller@103000 {
+ compatible = "nuvoton,npcm750-pwm-fan";
+ reg = <0x103000 0x2000>,
+ <0x180000 0x8000>;
+ reg-names = "pwm_base", "fan_base";
+ clocks = <&clk NPCM7XX_CLK_APB3>,
+ <&clk NPCM7XX_CLK_APB4>;
+ clock-names = "clk_apb3","clk_apb4";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins &pwm1_pins &pwm2_pins
+ &fanin0_pins &fanin1_pins &fanin2_pins
+ &fanin3_pins &fanin4_pins>;
+
+ pwm@0 {
+ pwm-ch = /bits/ 8 <0x00>;
+ fan-ch = /bits/ 8 <0x00 0x01>;
+ cooling-levels = <127 255>;
+ };
+ pwm@1 {
+ pwm-ch = /bits/ 8 <0x01>;
+ fan-ch = /bits/ 8 <0x02 0x03>;
+ };
+ pwm@2 {
+ pwm-ch = /bits/ 8 <0x02>;
+ fan-ch = /bits/ 8 <0x04>;
+ };
+
+};
\ No newline at end of file
--
2.14.1
\
 
 \ /
  Last update: 2018-06-25 17:59    [W:0.050 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site