lkml.org 
[lkml]   [2018]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v7 00/29] Add support for mediatek SOC MT2712
    On Wed, Jun 20, 2018 at 04:19:02PM +0800, Stu Hsieh wrote:
    > This patch add support for the Mediatek MT2712 DISP subsystem.
    > MT2712 is base on MT8173, there are some difference as following:
    > MT2712 support three disp output(two ovl and one rdma)
    >
    > Change in v6:
    > - Update commit message for the patch
    > "drm/mediatek: Update the definition of connection from RDMA1 to DPI0"

    Just a drive-by comment on the mediatek driver:

    As far as I can see mtk_drm_gem.c reimplements the cma helpers as a
    copypaste job. Any reasons why you're not using the normal cma helpers?

    Thanks, Daniel
    >
    > Stu Hsieh (29):
    > drm/mediatek: update dt-bindings for mt2712
    > drm/mediatek: support maximum 64 mutex mod
    > drm/mediatek: add ddp component AAL1
    > drm/mediatek: add ddp component OD1
    > drm/mediatek: add ddp component PWM1
    > drm/mediatek: add ddp component PWM2
    > drm/mediatek: add component DPI1
    > drm/mediatek: add component DSI2
    > drm/mediatek: add component DSI3
    > drm/mediatek: add the DSI1 for component init condition
    > drm/mediatek: add connection from OD1 to RDMA1
    > drm/mediatek: Update the definition of connection from RDMA1 to DPI0
    > drm/mediatek: add connection from RDMA0 to DPI0
    > drm/mediatek: add connection from RDMA0 to DSI2
    > drm/mediatek: add connection from RDMA0 to DSI3
    > drm/mediatek: add connection from RDMA1 to DPI1
    > drm/mediatek: add connection from RDMA1 to DSI1
    > drm/mediatek: add connection from RDMA1 to DSI2
    > drm/mediatek: add connection from RDMA1 to DSI3
    > drm/mediatek: add connection from RDMA2 to DPI0
    > drm/mediatek: add connection from RDMA2 to DPI1
    > drm/mediatek: add connection from RDMA2 to DSI1
    > drm/mediatek: add connection from RDMA2 to DSI2
    > drm/mediatek: add connection from RDMA2 to DSI3
    > drm/mediatek: add DPI1 support for mutex
    > drm/mediatek: add DSI2 support for mutex
    > drm/mediatek: add DSI3 support for mutex
    > drm/mediatek: add third ddp path
    > drm/mediatek: Add support for mediatek SOC MT2712
    >
    > .../bindings/display/mediatek/mediatek,disp.txt | 2 +-
    > drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 3 +
    > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 235 ++++++++++++++++++---
    > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 15 +-
    > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 10 +-
    > drivers/gpu/drm/mediatek/mtk_drm_drv.c | 47 ++++-
    > drivers/gpu/drm/mediatek/mtk_drm_drv.h | 5 +-
    > 7 files changed, 274 insertions(+), 43 deletions(-)
    >
    > --
    > 2.12.5
    >
    > _______________________________________________
    > dri-devel mailing list
    > dri-devel@lists.freedesktop.org
    > https://lists.freedesktop.org/mailman/listinfo/dri-devel

    --
    Daniel Vetter
    Software Engineer, Intel Corporation
    http://blog.ffwll.ch

    \
     
     \ /
      Last update: 2018-06-25 10:49    [W:4.152 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site