lkml.org 
[lkml]   [2018]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 1/6] mtd: rawnand: marvell: Handle on-die ECC
Date
From the controllers point of view this is the same as no or
software only ECC.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
Changes in v2:
- New
Changes in v3:
- Add review from Boris
Changes in v4:
- None
Changes in v5:
- None
Changes in v6:
- None

drivers/mtd/nand/raw/marvell_nand.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index ebb1d141b900..ba6889bbe802 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2157,6 +2157,7 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
break;
case NAND_ECC_NONE:
case NAND_ECC_SOFT:
+ case NAND_ECC_ON_DIE:
if (!nfc->caps->is_nfcv2 && mtd->writesize != SZ_512 &&
mtd->writesize != SZ_2K) {
dev_err(nfc->dev, "NFCv1 cannot write %d bytes pages\n",
--
2.18.0
\
 
 \ /
  Last update: 2018-06-25 00:46    [W:0.089 / U:1.384 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site