lkml.org 
[lkml]   [2018]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] iio: adc: at91-sama5d2_adc: add support for oversampling resolution
On Thu, 21 Jun 2018 10:56:21 +0300
Eugen Hristev <eugen.hristev@microchip.com> wrote:

> This implements oversampling support for the SAMA5d2 ADC device.
> Enabling oversampling : OSR can improve resolution from 12 bits to
> 13 or 14 bits.
> Changing the channel specification to have 14 bits, and we shift the value
> 1 bit to the left if we have oversampling for just one extra bit, and two
> bits to the left if we have no oversampling (old support).
> From this commit on, the converted values for all the voltage channels
> change to 14 bits real data, with most insignificant two bits always zero
> if oversampling is not enabled.
> sysfs object oversampling_ratio has been enabled and
> oversampling_ratio_available will list possible values (1 or 4 or 16) having
> 1 as default (no oversampling, 1 sample for each conversion).
> Special care was required for the triggered buffer scenario (+ DMA), to
> adjust the values accordingly.
> Touchscreen measurements supported by this driver are not affected by
> oversampling, they are still on 12 bits (scale handing is already included
> in the driver).
>
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>

Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.

Thanks,

Jonathan

> ---
> Changes in v2:
> - updated channel spec to 14 bits as reviewed by Jonathan.
> This makes things much simpler, and no more INT_PLUS_MICRO values.
> - tidy up the extra line which was forgotten there
> - renamed 0SAMPLES macro to 1SAMPLES , which makes more sense (1 sample for
> each conversion is the actual number we have). other OSR values are 4SAMPLES
> or 16SAMPLES per conversion.
> - made code a bit clearer to read by having a per array adjust function
> instead of those ugly casts I was using in v1. This is needed to adjust
> the values recieved from DMA for each u16 storage bits per conversion (shift
> left or not according to OSR setting).
>
> drivers/iio/adc/at91-sama5d2_adc.c | 189 ++++++++++++++++++++++++++++++++-----
> 1 file changed, 163 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
> index 58c4c2b..adf1d69 100644
> --- a/drivers/iio/adc/at91-sama5d2_adc.c
> +++ b/drivers/iio/adc/at91-sama5d2_adc.c
> @@ -130,6 +130,15 @@
> #define AT91_SAMA5D2_OVER 0x3c
> /* Extended Mode Register */
> #define AT91_SAMA5D2_EMR 0x40
> +/* Extended Mode Register - Oversampling rate */
> +#define AT91_SAMA5D2_EMR_OSR(V) ((V) << 16)
> +#define AT91_SAMA5D2_EMR_OSR_MASK GENMASK(17, 16)
> +#define AT91_SAMA5D2_EMR_OSR_1SAMPLES 0
> +#define AT91_SAMA5D2_EMR_OSR_4SAMPLES 1
> +#define AT91_SAMA5D2_EMR_OSR_16SAMPLES 2
> +
> +/* Extended Mode Register - Averaging on single trigger event */
> +#define AT91_SAMA5D2_EMR_ASTE(V) ((V) << 20)
> /* Compare Window Register */
> #define AT91_SAMA5D2_CWR 0x44
> /* Channel Gain Register */
> @@ -248,6 +257,11 @@
> #define AT91_HWFIFO_MAX_SIZE_STR "128"
> #define AT91_HWFIFO_MAX_SIZE 128
>
> +/* Possible values for oversampling ratio */
> +#define AT91_OSR_1SAMPLES 1
> +#define AT91_OSR_4SAMPLES 4
> +#define AT91_OSR_16SAMPLES 16
> +
> #define AT91_SAMA5D2_CHAN_SINGLE(num, addr) \
> { \
> .type = IIO_VOLTAGE, \
> @@ -256,12 +270,13 @@
> .scan_index = num, \
> .scan_type = { \
> .sign = 'u', \
> - .realbits = 12, \
> + .realbits = 14, \
> .storagebits = 16, \
> }, \
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
> + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
> + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
> .datasheet_name = "CH"#num, \
> .indexed = 1, \
> }
> @@ -276,12 +291,13 @@
> .scan_index = num + AT91_SAMA5D2_SINGLE_CHAN_CNT, \
> .scan_type = { \
> .sign = 's', \
> - .realbits = 12, \
> + .realbits = 14, \
> .storagebits = 16, \
> }, \
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
> + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
> + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
> .datasheet_name = "CH"#num"-CH"#num2, \
> .indexed = 1, \
> }
> @@ -299,7 +315,8 @@
> .storagebits = 16, \
> }, \
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
> + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
> + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
> .datasheet_name = name, \
> }
> #define AT91_SAMA5D2_CHAN_PRESSURE(num, name) \
> @@ -313,7 +330,8 @@
> .storagebits = 16, \
> }, \
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
> + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
> + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
> .datasheet_name = name, \
> }
>
> @@ -384,6 +402,7 @@ struct at91_adc_state {
> const struct iio_chan_spec *chan;
> bool conversion_done;
> u32 conversion_value;
> + unsigned int oversampling_ratio;
> struct at91_adc_soc_info soc_info;
> wait_queue_head_t wq_data_available;
> struct at91_adc_dma dma_st;
> @@ -475,6 +494,77 @@ static inline int at91_adc_of_xlate(struct iio_dev *indio_dev,
> return at91_adc_chan_xlate(indio_dev, iiospec->args[0]);
> }
>
> +static void at91_adc_config_emr(struct at91_adc_state *st)
> +{
> + /* configure the extended mode register */
> + unsigned int emr = at91_adc_readl(st, AT91_SAMA5D2_EMR);
> +
> + /* select oversampling per single trigger event */
> + emr |= AT91_SAMA5D2_EMR_ASTE(1);
> +
> + /* delete leftover content if it's the case */
> + emr &= ~AT91_SAMA5D2_EMR_OSR_MASK;
> +
> + /* select oversampling ratio from configuration */
> + switch (st->oversampling_ratio) {
> + case AT91_OSR_1SAMPLES:
> + emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_1SAMPLES) &
> + AT91_SAMA5D2_EMR_OSR_MASK;
> + break;
> + case AT91_OSR_4SAMPLES:
> + emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_4SAMPLES) &
> + AT91_SAMA5D2_EMR_OSR_MASK;
> + break;
> + case AT91_OSR_16SAMPLES:
> + emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_16SAMPLES) &
> + AT91_SAMA5D2_EMR_OSR_MASK;
> + break;
> + };
> +
> + at91_adc_writel(st, AT91_SAMA5D2_EMR, emr);
> +}
> +
> +static int at91_adc_adjust_val_osr(struct at91_adc_state *st, int *val)
> +{
> + if (st->oversampling_ratio == AT91_OSR_1SAMPLES) {
> + /*
> + * in this case we only have 12 bits of real data, but channel
> + * is registered as 14 bits, so shift left two bits
> + */
> + *val <<= 2;
> + } else if (st->oversampling_ratio == AT91_OSR_4SAMPLES) {
> + /*
> + * in this case we have 13 bits of real data, but channel
> + * is registered as 14 bits, so left shift one bit
> + */
> + *val <<= 1;
> + }
> +
> + return IIO_VAL_INT;
> +}
> +
> +static void at91_adc_adjust_val_osr_array(struct at91_adc_state *st, void *buf,
> + int len)
> +{
> + int i = 0, val;
> + u16 *buf_u16 = (u16 *) buf;
> +
> + /*
> + * We are converting each two bytes (each sample).
> + * First convert the byte based array to u16, and convert each sample
> + * separately.
> + * Each value is two bytes in an array of chars, so to not shift
> + * more than we need, save the value separately.
> + * len is in bytes, so divide by two to get number of samples.
> + */
> + while (i < len / 2) {
> + val = buf_u16[i];
> + at91_adc_adjust_val_osr(st, &val);
> + buf_u16[i] = val;
> + i++;
> + }
> +}
> +
> static int at91_adc_configure_touch(struct at91_adc_state *st, bool state)
> {
> u32 clk_khz = st->current_sample_rate / 1000;
> @@ -916,6 +1006,7 @@ static void at91_adc_trigger_handler_nodma(struct iio_dev *indio_dev,
> {
> struct at91_adc_state *st = iio_priv(indio_dev);
> int i = 0;
> + int val;
> u8 bit;
>
> for_each_set_bit(bit, indio_dev->active_scan_mask,
> @@ -936,7 +1027,9 @@ static void at91_adc_trigger_handler_nodma(struct iio_dev *indio_dev,
> * Thus, emit a warning.
> */
> if (chan->type == IIO_VOLTAGE) {
> - st->buffer[i] = at91_adc_readl(st, chan->address);
> + val = at91_adc_readl(st, chan->address);
> + at91_adc_adjust_val_osr(st, &val);
> + st->buffer[i] = val;
> } else {
> st->buffer[i] = 0;
> WARN(true, "This trigger cannot handle this type of channel");
> @@ -972,6 +1065,14 @@ static void at91_adc_trigger_handler_dma(struct iio_dev *indio_dev)
> interval = div_s64((ns - st->dma_st.dma_ts), sample_count);
>
> while (transferred_len >= sample_size) {
> + /*
> + * for all the values in the current sample,
> + * adjust the values inside the buffer for oversampling
> + */
> + at91_adc_adjust_val_osr_array(st,
> + &st->dma_st.rx_buf[st->dma_st.buf_idx],
> + sample_size);
> +
> iio_push_to_buffers_with_timestamp(indio_dev,
> (st->dma_st.rx_buf + st->dma_st.buf_idx),
> (st->dma_st.dma_ts + interval * sample_index));
> @@ -1212,7 +1313,7 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
> mutex_unlock(&st->lock);
> iio_device_release_direct_mode(indio_dev);
>
> - return ret;
> + return at91_adc_adjust_val_osr(st, val);
> }
> if (chan->type == IIO_PRESSURE) {
> ret = iio_device_claim_direct_mode(indio_dev);
> @@ -1225,7 +1326,7 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
> mutex_unlock(&st->lock);
> iio_device_release_direct_mode(indio_dev);
>
> - return ret;
> + return at91_adc_adjust_val_osr(st, val);
> }
>
> /* in this case we have a voltage channel */
> @@ -1254,9 +1355,9 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
>
> if (ret > 0) {
> *val = st->conversion_value;
> + ret = at91_adc_adjust_val_osr(st, val);
> if (chan->scan_type.sign == 's')
> *val = sign_extend32(*val, 11);
> - ret = IIO_VAL_INT;
> st->conversion_done = false;
> }
>
> @@ -1292,6 +1393,10 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev,
> *val = at91_adc_get_sample_freq(st);
> return IIO_VAL_INT;
>
> + case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> + *val = st->oversampling_ratio;
> + return IIO_VAL_INT;
> +
> default:
> return -EINVAL;
> }
> @@ -1303,16 +1408,28 @@ static int at91_adc_write_raw(struct iio_dev *indio_dev,
> {
> struct at91_adc_state *st = iio_priv(indio_dev);
>
> - if (mask != IIO_CHAN_INFO_SAMP_FREQ)
> - return -EINVAL;
> + switch (mask) {
> + case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> + if ((val != AT91_OSR_1SAMPLES) && (val != AT91_OSR_4SAMPLES) &&
> + (val != AT91_OSR_16SAMPLES))
> + return -EINVAL;
> + /* if no change, optimize out */
> + if (val == st->oversampling_ratio)
> + return 0;
> + st->oversampling_ratio = val;
> + /* update ratio */
> + at91_adc_config_emr(st);
> + return 0;
> + case IIO_CHAN_INFO_SAMP_FREQ:
> + if (val < st->soc_info.min_sample_rate ||
> + val > st->soc_info.max_sample_rate)
> + return -EINVAL;
>
> - if (val < st->soc_info.min_sample_rate ||
> - val > st->soc_info.max_sample_rate)
> + at91_adc_setup_samp_freq(st, val);
> + return 0;
> + default:
> return -EINVAL;
> -
> - at91_adc_setup_samp_freq(st, val);
> -
> - return 0;
> + };
> }
>
> static void at91_adc_dma_init(struct platform_device *pdev)
> @@ -1446,14 +1563,6 @@ static int at91_adc_update_scan_mode(struct iio_dev *indio_dev,
> return 0;
> }
>
> -static const struct iio_info at91_adc_info = {
> - .read_raw = &at91_adc_read_raw,
> - .write_raw = &at91_adc_write_raw,
> - .update_scan_mode = &at91_adc_update_scan_mode,
> - .of_xlate = &at91_adc_of_xlate,
> - .hwfifo_set_watermark = &at91_adc_set_watermark,
> -};
> -
> static void at91_adc_hw_init(struct at91_adc_state *st)
> {
> at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
> @@ -1466,6 +1575,9 @@ static void at91_adc_hw_init(struct at91_adc_state *st)
> AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
>
> at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate);
> +
> + /* configure extended mode register */
> + at91_adc_config_emr(st);
> }
>
> static ssize_t at91_adc_get_fifo_state(struct device *dev,
> @@ -1496,6 +1608,20 @@ static IIO_DEVICE_ATTR(hwfifo_watermark, 0444,
> static IIO_CONST_ATTR(hwfifo_watermark_min, "2");
> static IIO_CONST_ATTR(hwfifo_watermark_max, AT91_HWFIFO_MAX_SIZE_STR);
>
> +static IIO_CONST_ATTR(oversampling_ratio_available,
> + __stringify(AT91_OSR_1SAMPLES) " "
> + __stringify(AT91_OSR_4SAMPLES) " "
> + __stringify(AT91_OSR_16SAMPLES));
> +
> +static struct attribute *at91_adc_attributes[] = {
> + &iio_const_attr_oversampling_ratio_available.dev_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group at91_adc_attribute_group = {
> + .attrs = at91_adc_attributes,
> +};
> +
> static const struct attribute *at91_adc_fifo_attributes[] = {
> &iio_const_attr_hwfifo_watermark_min.dev_attr.attr,
> &iio_const_attr_hwfifo_watermark_max.dev_attr.attr,
> @@ -1504,6 +1630,15 @@ static const struct attribute *at91_adc_fifo_attributes[] = {
> NULL,
> };
>
> +static const struct iio_info at91_adc_info = {
> + .attrs = &at91_adc_attribute_group,
> + .read_raw = &at91_adc_read_raw,
> + .write_raw = &at91_adc_write_raw,
> + .update_scan_mode = &at91_adc_update_scan_mode,
> + .of_xlate = &at91_adc_of_xlate,
> + .hwfifo_set_watermark = &at91_adc_set_watermark,
> +};
> +
> static int at91_adc_probe(struct platform_device *pdev)
> {
> struct iio_dev *indio_dev;
> @@ -1532,6 +1667,8 @@ static int at91_adc_probe(struct platform_device *pdev)
> bitmap_set(&st->touch_st.channels_bitmask,
> AT91_SAMA5D2_TOUCH_P_CHAN_IDX, 1);
>
> + st->oversampling_ratio = AT91_OSR_1SAMPLES;
> +
> ret = of_property_read_u32(pdev->dev.of_node,
> "atmel,min-sample-rate-hz",
> &st->soc_info.min_sample_rate);

\
 
 \ /
  Last update: 2018-06-24 15:59    [W:0.066 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site