lkml.org 
[lkml]   [2018]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 6/7] ARM: dts: s5pv210: Add initial DTS config for SGH-T959P phone
On 21 June 2018 at 21:09, Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> wrote:
> From: Jonathan Bakker <xc-racer2@live.ca>

Commit msg needed.

> Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/s5pv210-fascinate4g.dts | 40 +++++++++++++++++++++++++++++++
> 2 files changed, 41 insertions(+)
> create mode 100644 arch/arm/boot/dts/s5pv210-fascinate4g.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 522ebdca1d3d..d00e995875bb 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -846,6 +846,7 @@ dtb-$(CONFIG_ARCH_S3C64XX) += \
> s3c6410-smdk6410.dtb
> dtb-$(CONFIG_ARCH_S5PV210) += \
> s5pv210-aquila.dtb \
> + s5pv210-fascinate4g.dtb \
> s5pv210-galaxys.dtb \
> s5pv210-goni.dtb \
> s5pv210-smdkc110.dtb \
> diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
> new file mode 100644
> index 000000000000..37967f57c7b7
> --- /dev/null
> +++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
> @@ -0,0 +1,40 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>

Duplicated header.

> +#include "s5pv210-aries.dtsi"
> +
> +/ {
> + model = "Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210";
> + compatible = "samsung,fascinate4g", "samsung,aries", "samsung,s5pv210";
> +
> + chosen {
> + bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p1 rw rootwait ignore_loglevel earlyprintk";

Same comment as for Galaxy S.

Best regards,
Krzysztof

> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + power {
> + label = "power";
> + gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + wakeup-source;
> + };
> +
> + vol-down {
> + label = "volume_down";
> + gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEDOWN>;
> + };
> +
> + vol-up {
> + label = "volume_up";
> + gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + };
> + };
> +};
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2018-06-22 09:59    [W:0.093 / U:0.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site