lkml.org 
[lkml]   [2018]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 04/10] Input: ams_delta_serio: Replace power GPIO with regulator
On Fri, Jun 22, 2018 at 12:41:22AM +0200, Janusz Krzysztofik wrote:
> Modify the driver so it no longer requests and manipulates the
> "keybrd_pwr" GPIO pin but a "vcc" regulator supply instead.
>
> For this to work with Amstrad Delta, define a regulator over the
> "keybrd_pwr" GPIO pin with the "vcc" supply for ams-delta-serio device
> and register it from the board file. Both assign an absulute GPIO
> number to the soon depreciated .gpio member of the regulator config
> structure, and also build and register a GPIO lookup table so it is
> ready for use by the regulator driver as soon as its upcoming update
> is applied.
>
> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>

Input bits look good.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

> ---
> Changelog:
> v2: - extended comment above error code conversion, thanks Dmitry for
> requesting that,
> - rebased on v4.18-rc1, no conflicts.
>
> arch/arm/mach-omap1/board-ams-delta.c | 63 +++++++++++++++++++++++++++++++++--
> drivers/input/serio/ams_delta_serio.c | 37 +++++++++++++++-----
> 2 files changed, 89 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
> index 2119d2d3ba84..706eb2f9301d 100644
> --- a/arch/arm/mach-omap1/board-ams-delta.c
> +++ b/arch/arm/mach-omap1/board-ams-delta.c
> @@ -509,6 +509,46 @@ static struct platform_device ams_delta_serio_device = {
> .id = PLATFORM_DEVID_NONE,
> };
>
> +static struct regulator_consumer_supply keybrd_pwr_consumers[] = {
> + /*
> + * Initialize supply .dev_name with NULL. It will be replaced
> + * with serio dev_name() as soon as the serio device is registered.
> + */
> + REGULATOR_SUPPLY("vcc", NULL),
> +};
> +
> +static struct regulator_init_data keybrd_pwr_initdata = {
> + .constraints = {
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(keybrd_pwr_consumers),
> + .consumer_supplies = keybrd_pwr_consumers,
> +};
> +
> +static struct fixed_voltage_config keybrd_pwr_config = {
> + .supply_name = "keybrd_pwr",
> + .microvolts = 5000000,
> + .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR,
> + .enable_high = 1,
> + .init_data = &keybrd_pwr_initdata,
> +};
> +
> +static struct platform_device keybrd_pwr_device = {
> + .name = "reg-fixed-voltage",
> + .id = PLATFORM_DEVID_AUTO,
> + .dev = {
> + .platform_data = &keybrd_pwr_config,
> + },
> +};
> +
> +static struct gpiod_lookup_table keybrd_pwr_gpio_table = {
> + .table = {
> + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_KEYBRD_PWR, NULL,
> + GPIO_ACTIVE_HIGH),
> + { },
> + },
> +};
> +
> static struct platform_device *ams_delta_devices[] __initdata = {
> &latch1_gpio_device,
> &latch2_gpio_device,
> @@ -526,6 +566,7 @@ static struct platform_device *late_devices[] __initdata = {
>
> static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = {
> &ams_delta_audio_gpio_table,
> + &keybrd_pwr_gpio_table,
> };
>
> static struct gpiod_lookup_table *late_gpio_tables[] __initdata = {
> @@ -566,12 +607,30 @@ static void __init ams_delta_init(void)
> platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
>
> /*
> - * As soon as devices have been registered, assign their dev_names
> - * to respective GPIO lookup tables before they are added.
> + * As soon as regulator consumers have been registered, assign their
> + * dev_names to consumer supply entries of respective regulators.
> + */
> + keybrd_pwr_consumers[0].dev_name =
> + dev_name(&ams_delta_serio_device.dev);
> +
> + /*
> + * Once consumer supply entries are populated with dev_names,
> + * register regulator devices. At this stage only the keyboard
> + * power regulator has its consumer supply table fully populated.
> + */
> + platform_device_register(&keybrd_pwr_device);
> +
> + /*
> + * As soon as GPIO consumers have been registered, assign
> + * their dev_names to respective GPIO lookup tables.
> */
> ams_delta_audio_gpio_table.dev_id =
> dev_name(&ams_delta_audio_device.dev);
> + keybrd_pwr_gpio_table.dev_id = dev_name(&keybrd_pwr_device.dev);
>
> + /*
> + * Once GPIO lookup tables are populated with dev_names, register them.
> + */
> gpiod_add_lookup_tables(ams_delta_gpio_tables,
> ARRAY_SIZE(ams_delta_gpio_tables));
>
> diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
> index 551a4fa73fe4..854d0d3ada52 100644
> --- a/drivers/input/serio/ams_delta_serio.c
> +++ b/drivers/input/serio/ams_delta_serio.c
> @@ -23,6 +23,7 @@
> #include <linux/gpio.h>
> #include <linux/irq.h>
> #include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> #include <linux/serio.h>
> #include <linux/slab.h>
> #include <linux/module.h>
> @@ -39,6 +40,7 @@ MODULE_LICENSE("GPL");
>
> struct ams_delta_serio {
> struct serio *serio;
> + struct regulator *vcc;
> };
>
> static int check_data(struct serio *serio, int data)
> @@ -94,16 +96,18 @@ static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id)
>
> static int ams_delta_serio_open(struct serio *serio)
> {
> - /* enable keyboard */
> - gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 1);
> + struct ams_delta_serio *priv = serio->port_data;
>
> - return 0;
> + /* enable keyboard */
> + return regulator_enable(priv->vcc);
> }
>
> static void ams_delta_serio_close(struct serio *serio)
> {
> + struct ams_delta_serio *priv = serio->port_data;
> +
> /* disable keyboard */
> - gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 0);
> + regulator_disable(priv->vcc);
> }
>
> static const struct gpio ams_delta_gpios[] __initconst_or_module = {
> @@ -117,11 +121,6 @@ static const struct gpio ams_delta_gpios[] __initconst_or_module = {
> .flags = GPIOF_DIR_IN,
> .label = "serio-clock",
> },
> - {
> - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR,
> - .flags = GPIOF_OUT_INIT_LOW,
> - .label = "serio-power",
> - },
> {
> .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT,
> .flags = GPIOF_OUT_INIT_LOW,
> @@ -146,6 +145,26 @@ static int ams_delta_serio_init(struct platform_device *pdev)
> goto serio;
> }
>
> + priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
> + if (IS_ERR(priv->vcc)) {
> + err = PTR_ERR(priv->vcc);
> + dev_err(&pdev->dev, "regulator request failed (%d)\n", err);
> + /*
> + * When running on a non-dt platform and requested regulator
> + * is not available, devm_regulator_get() never returns
> + * -EPROBE_DEFER as it is not able to justify if the regulator
> + * may still appear later. On the other hand, the board can
> + * still set full constriants flag at late_initcall in order
> + * to instruct devm_regulator_get() to returnn a dummy one
> + * if sufficient. Hence, if we get -ENODEV here, let's convert
> + * it to -EPROBE_DEFER and wait for the board to decide or
> + * let Deferred Probe infrastructure handle this error.
> + */
> + if (err == -ENODEV)
> + err = -EPROBE_DEFER;
> + goto gpio;
> + }
> +
> err = request_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK),
> ams_delta_serio_interrupt, IRQ_TYPE_EDGE_RISING,
> DRIVER_NAME, priv);
> --
> 2.16.4
>

--
Dmitry

\
 
 \ /
  Last update: 2018-06-22 02:09    [W:0.113 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site