lkml.org 
[lkml]   [2018]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V3 2/7] backlight: qcom-wled: restructure the qcom-wled bindings
On Tue, Jun 19, 2018 at 04:43:37PM +0530, Kiran Gunda wrote:
> Restructure the qcom-wled bindings for the better readability.
>
> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>

Acked-by: Daniel Thompson <daniel.thompson@linaro.org>

> ---
> .../bindings/leds/backlight/qcom-wled.txt | 110 ++++++++++++++++-----
> 1 file changed, 85 insertions(+), 25 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt
> index fb39e32..14f28f2 100644
> --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt
> +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt
> @@ -1,30 +1,90 @@
> Binding for Qualcomm Technologies, Inc. WLED driver
>
> -Required properties:
> -- compatible: should be "qcom,pm8941-wled"
> -- reg: slave address
> -
> -Optional properties:
> -- default-brightness: brightness value on boot, value from: 0-4095
> - default: 2048
> -- label: The name of the backlight device
> -- qcom,cs-out: bool; enable current sink output
> -- qcom,cabc: bool; enable content adaptive backlight control
> -- qcom,ext-gen: bool; use externally generated modulator signal to dim
> -- qcom,current-limit: mA; per-string current limit; value from 0 to 25
> - default: 20mA
> -- qcom,current-boost-limit: mA; boost current limit; one of:
> - 105, 385, 525, 805, 980, 1260, 1400, 1680
> - default: 805mA
> -- qcom,switching-freq: kHz; switching frequency; one of:
> - 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371,
> - 1600, 1920, 2400, 3200, 4800, 9600,
> - default: 1600kHz
> -- qcom,ovp: V; Over-voltage protection limit; one of:
> - 27, 29, 32, 35
> - default: 29V
> -- qcom,num-strings: #; number of led strings attached; value from 1 to 3
> - default: 2
> +WLED (White Light Emitting Diode) driver is used for controlling display
> +backlight that is part of PMIC on Qualcomm Technologies, Inc. reference
> +platforms. The PMIC is connected to the host processor via SPMI bus.
> +
> +- compatible
> + Usage: required
> + Value type: <string>
> + Definition: should be one of:
> + "qcom,pm8941-wled"
> + "qcom,pmi8998-wled"
> + "qcom,pm660l-wled"
> +
> +- reg
> + Usage: required
> + Value type: <prop encoded array>
> + Definition: Base address of the WLED modules.
> +
> +- default-brightness
> + Usage: optional
> + Value type: <u32>
> + Definition: brightness value on boot, value from: 0-4095
> + Default: 2048
> +
> +- label
> + Usage: required
> + Value type: <string>
> + Definition: The name of the backlight device
> +
> +- qcom,cs-out
> + Usage: optional
> + Value type: <bool>
> + Definition: enable current sink output.
> + This property is supported only for PM8941.
> +
> +- qcom,cabc
> + Usage: optional
> + Value type: <bool>
> + Definition: enable content adaptive backlight control.
> +
> +- qcom,ext-gen
> + Usage: optional
> + Value type: <bool>
> + Definition: use externally generated modulator signal to dim.
> + This property is supported only for PM8941.
> +
> +- qcom,current-limit
> + Usage: optional
> + Value type: <u32>
> + Definition: mA; per-string current limit
> + value: For pm8941: from 0 to 25 with 5 mA step
> + Default 20 mA.
> + For pmi8998: from 0 to 30 with 5 mA step
> + Default 25 mA.
> +
> +- qcom,current-boost-limit
> + Usage: optional
> + Value type: <u32>
> + Definition: mA; boost current limit.
> + For pm8941: one of: 105, 385, 525, 805, 980, 1260, 1400,
> + 1680. Default: 805 mA
> + For pmi8998: one of: 105, 280, 450, 620, 970, 1150, 1300,
> + 1500. Default: 970 mA
> +
> +- qcom,switching-freq
> + Usage: optional
> + Value type: <u32>
> + Definition: kHz; switching frequency; one of: 600, 640, 685, 738,
> + 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200,
> + 4800, 9600.
> + Default: for pm8941: 1600 kHz
> + for pmi8998: 800 kHz
> +
> +- qcom,ovp
> + Usage: optional
> + Value type: <u32>
> + Definition: V; Over-voltage protection limit; one of:
> + 27, 29, 32, 35. default: 29V
> + This property is supported only for PM8941.
> +
> +- qcom,num-strings
> + Usage: optional
> + Value type: <u32>
> + Definition: #; number of led strings attached;
> + value from 1 to 3. default: 2
> + This property is supported only for PM8941.
>
> Example:
>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>

\
 
 \ /
  Last update: 2018-06-21 15:13    [W:0.216 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site