lkml.org 
[lkml]   [2018]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V2 1/7] mmc: sdhci: add sd host v4 mode
On 21 June 2018 at 18:49, Adrian Hunter <adrian.hunter@intel.com> wrote:
> On 15/06/18 05:04, Chunyan Zhang wrote:
>> For SD host controller version 4.00 or later ones, there're two
>> modes of implementation - Version 3.00 compatible mode or
>> Version 4 mode. This patch introduces a flag to record this.
>>
>> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
>> ---
>> drivers/mmc/host/sdhci.c | 6 ++++++
>> drivers/mmc/host/sdhci.h | 6 ++++++
>> 2 files changed, 12 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
>> index 2ededa7f..cf5695f 100644
>> --- a/drivers/mmc/host/sdhci.c
>> +++ b/drivers/mmc/host/sdhci.c
>> @@ -3302,6 +3302,12 @@ void __sdhci_read_caps(struct sdhci_host *host, u16 *ver, u32 *caps, u32 *caps1)
>> v = ver ? *ver : sdhci_readw(host, SDHCI_HOST_VERSION);
>> host->version = (v & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT;
>>
>> + if (host->version >= SDHCI_SPEC_400) {
>> + if (sdhci_readw(host, SDHCI_HOST_CONTROL2) &
>> + SDHCI_CTRL_V4_MODE)
>> + host->v4_mode = true;
>> + }
>
> At this point the host controller has just been reset which would mean it
> must be in version 3 compatibility mode, which would mean this code doesn't
> do anything.

Why is it version 3 mode at this point?

I've tested this code on the sd host controller which was introduced
in 6/7 in this patch-set, the result showed that it was v4_mode.
Moreover without this patch, the Spreadtrum's sdhci driver in patch
6/7 couldn't work.

Am I missing something here?

Best,
Chunyan

>
>> +
>> if (host->quirks & SDHCI_QUIRK_MISSING_CAPS)
>> return;
>>
>> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
>> index c95b0a4..128b0ba 100644
>> --- a/drivers/mmc/host/sdhci.h
>> +++ b/drivers/mmc/host/sdhci.h
>> @@ -184,6 +184,7 @@
>> #define SDHCI_CTRL_DRV_TYPE_D 0x0030
>> #define SDHCI_CTRL_EXEC_TUNING 0x0040
>> #define SDHCI_CTRL_TUNED_CLK 0x0080
>> +#define SDHCI_CTRL_V4_MODE 0x1000
>> #define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
>>
>> #define SDHCI_CAPABILITIES 0x40
>> @@ -270,6 +271,8 @@
>> #define SDHCI_SPEC_100 0
>> #define SDHCI_SPEC_200 1
>> #define SDHCI_SPEC_300 2
>> +#define SDHCI_SPEC_400 3
>> +#define SDHCI_SPEC_410 4
>>
>> /*
>> * End of controller registers.
>> @@ -551,6 +554,9 @@ struct sdhci_host {
>> u32 sdma_boundary;
>>
>> unsigned long private[0] ____cacheline_aligned;
>> +
>> + /* Host Version 4 Enable */
>> + bool v4_mode;
>> };
>>
>> struct sdhci_ops {
>>
>

\
 
 \ /
  Last update: 2018-06-21 13:15    [W:0.071 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site