lkml.org 
[lkml]   [2018]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/1] arm64: dts: rockchip: correct voltage selector Firefly-RK3399
From
Date
On 06/20/2018 11:15 AM, Heiko Stübner wrote:
> Hi Heinrich,
>
> Am Mittwoch, 20. Juni 2018, 07:59:34 CEST schrieb Heinrich Schuchardt:
>> On 06/20/2018 01:21 AM, Heiko Stuebner wrote:
>>> Am Donnerstag, 14. Juni 2018, 14:55:27 CEST schrieb Heiko Stuebner:
>>>> Am Montag, 4. Juni 2018, 19:15:23 CEST schrieb Heinrich Schuchardt:
>>>>> Without this patch the Firefly-RK3399 board boot process hangs after
>>>>> these
>>>>>
>>>>> lines:
>>>>> fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
>>>>> fan53555-reg: supplied by vcc_sys
>>>>> vcc1v8_s3: supplied by vcc_1v8
>>>>>
>>>>> Blacklisting driver fan53555 allows booting.
>>>>>
>>>>> The device tree uses a value of fcs,suspend-voltage-selector different
>>>>> to
>>>>> any other board.
>>>>>
>>>>> Changing this setting to the usual value is sufficient to enable
>>>>> booting.
>>>>>
>>>>> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
>>>>
>>>> applied for 4.19.
>>>
>>> and dropped again.
>>>
>>> Sadly it looks like the patch causes conflicts with at least one firefly
>>> board in a kernelci lab. My own is currently not ready to use, so I cannot
>>> look myself right now.
>>>
>>> The issue kernelci people described sounded quite a lot like the one
>>> in your commit message, so my current theory is that the
>>> suspend-voltage-selector must in some form corespond to the
>>> cpu_b_sleep_h gpio setting we're currently not handling at all, which
>>> would therefore depend on how the bootloader sets this up.
>>
>> please, provide a link to the log displaying the issue and the contact
>> who can provide the exact setup.
>>
>> I have been testing with U-Boot as boot loader.
>
> failing boot can be found on
> https://kernelci.org/boot/id/5b2a053d59b514569079a872/
>
> As this board is sitting in the "lab-baylibre-seattle", I guess
> Kevin Hilman (Cc'ed now) is the one that can say a bit more about the
> board setup.
>
>
> The more interesting question would be how to make sure we don't
> die with possible different bootloader versions. As I don't really thing
> "upgrade your bootloader" is an always valid option.
>
>
> Heiko
>

Hi Kevin,

the RK3399-Firefly was booted on lab-baylibre-seattle with
U-Boot 2017.05-rc3-00131-gf79fd58d5f5c-dirty

f79fd58d5f5c is not a commit in U-Boot master.
The version number tells us it is 131 patches ahead of U-Boot 2017.05-rc3.
Dirty means the source contained uncommitted changes.

Unfortunately this is not a reproducible test environment.
Could you, please, provide the build recipe to reproduce the U-Boot
BayLibre is using?
Would it be possible to use mainline U-Boot in kernelci for this board?

Best regards

Heinrich

\
 
 \ /
  Last update: 2018-06-20 21:59    [W:0.086 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site