lkml.org 
[lkml]   [2018]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] ARM: dts: exynos: Add missing CPU clocks to secondary CPUs on Exynos542x
Hi Krzysztof,

On Wed, May 30, 2018 at 10:19 PM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> Secondary CPUs should have the same information in DeviceTree as booting
> CPU from both correctness point of view and for possible hotplug
> scenarios.
>
> Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> arch/arm/boot/dts/exynos5420-cpus.dtsi | 6 ++++++
> arch/arm/boot/dts/exynos5422-cpus.dtsi | 8 +++++++-
> 2 files changed, 13 insertions(+), 1 deletion(-)

Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>

Tested on exynos5800 peach-pi, so feel free to add

Tested-by: Alim Akhtar <alim.akhtar@samsung.com>

>
> diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
> index a8e449471304..0ee6e92a3c29 100644
> --- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
> +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
> @@ -38,6 +38,7 @@
> device_type = "cpu";
> compatible = "arm,cortex-a15";
> reg = <0x1>;
> + clocks = <&clock CLK_ARM_CLK>;
> clock-frequency = <1800000000>;
> cci-control-port = <&cci_control1>;
> operating-points-v2 = <&cluster_a15_opp_table>;
> @@ -49,6 +50,7 @@
> device_type = "cpu";
> compatible = "arm,cortex-a15";
> reg = <0x2>;
> + clocks = <&clock CLK_ARM_CLK>;
> clock-frequency = <1800000000>;
> cci-control-port = <&cci_control1>;
> operating-points-v2 = <&cluster_a15_opp_table>;
> @@ -60,6 +62,7 @@
> device_type = "cpu";
> compatible = "arm,cortex-a15";
> reg = <0x3>;
> + clocks = <&clock CLK_ARM_CLK>;
> clock-frequency = <1800000000>;
> cci-control-port = <&cci_control1>;
> operating-points-v2 = <&cluster_a15_opp_table>;
> @@ -83,6 +86,7 @@
> device_type = "cpu";
> compatible = "arm,cortex-a7";
> reg = <0x101>;
> + clocks = <&clock CLK_KFC_CLK>;
> clock-frequency = <1000000000>;
> cci-control-port = <&cci_control0>;
> operating-points-v2 = <&cluster_a7_opp_table>;
> @@ -94,6 +98,7 @@
> device_type = "cpu";
> compatible = "arm,cortex-a7";
> reg = <0x102>;
> + clocks = <&clock CLK_KFC_CLK>;
> clock-frequency = <1000000000>;
> cci-control-port = <&cci_control0>;
> operating-points-v2 = <&cluster_a7_opp_table>;
> @@ -105,6 +110,7 @@
> device_type = "cpu";
> compatible = "arm,cortex-a7";
> reg = <0x103>;
> + clocks = <&clock CLK_KFC_CLK>;
> clock-frequency = <1000000000>;
> cci-control-port = <&cci_control0>;
> operating-points-v2 = <&cluster_a7_opp_table>;
> diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
> index 7c130a00d1a8..e4a5857c135f 100644
> --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
> @@ -37,6 +37,7 @@
> device_type = "cpu";
> compatible = "arm,cortex-a7";
> reg = <0x101>;
> + clocks = <&clock CLK_KFC_CLK>;
> clock-frequency = <1000000000>;
> cci-control-port = <&cci_control0>;
> operating-points-v2 = <&cluster_a7_opp_table>;
> @@ -48,6 +49,7 @@
> device_type = "cpu";
> compatible = "arm,cortex-a7";
> reg = <0x102>;
> + clocks = <&clock CLK_KFC_CLK>;
> clock-frequency = <1000000000>;
> cci-control-port = <&cci_control0>;
> operating-points-v2 = <&cluster_a7_opp_table>;
> @@ -59,6 +61,7 @@
> device_type = "cpu";
> compatible = "arm,cortex-a7";
> reg = <0x103>;
> + clocks = <&clock CLK_KFC_CLK>;
> clock-frequency = <1000000000>;
> cci-control-port = <&cci_control0>;
> operating-points-v2 = <&cluster_a7_opp_table>;
> @@ -69,8 +72,8 @@
> cpu4: cpu@0 {
> device_type = "cpu";
> compatible = "arm,cortex-a15";
> - clocks = <&clock CLK_ARM_CLK>;
> reg = <0x0>;
> + clocks = <&clock CLK_ARM_CLK>;
> clock-frequency = <1800000000>;
> cci-control-port = <&cci_control1>;
> operating-points-v2 = <&cluster_a15_opp_table>;
> @@ -82,6 +85,7 @@
> device_type = "cpu";
> compatible = "arm,cortex-a15";
> reg = <0x1>;
> + clocks = <&clock CLK_ARM_CLK>;
> clock-frequency = <1800000000>;
> cci-control-port = <&cci_control1>;
> operating-points-v2 = <&cluster_a15_opp_table>;
> @@ -93,6 +97,7 @@
> device_type = "cpu";
> compatible = "arm,cortex-a15";
> reg = <0x2>;
> + clocks = <&clock CLK_ARM_CLK>;
> clock-frequency = <1800000000>;
> cci-control-port = <&cci_control1>;
> operating-points-v2 = <&cluster_a15_opp_table>;
> @@ -104,6 +109,7 @@
> device_type = "cpu";
> compatible = "arm,cortex-a15";
> reg = <0x3>;
> + clocks = <&clock CLK_ARM_CLK>;
> clock-frequency = <1800000000>;
> cci-control-port = <&cci_control1>;
> operating-points-v2 = <&cluster_a15_opp_table>;
> --
> 2.14.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html



--
Regards,
Alim

\
 
 \ /
  Last update: 2018-06-02 17:41    [W:0.118 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site