lkml.org 
[lkml]   [2018]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/8] dt-bindings: tegra186-hsp: Add shared interrupts
From
Date
On 22.05.2018 18:15, Jon Hunter wrote:
>
> On 08/05/18 12:43, Mikko Perttunen wrote:
>> Non-doorbell interrupts are routed through "shared interrupts". These
>> interrupts can be mapped to various internal interrupt lines. Add
>> interrupt properties for shared interrupts to the tegra186-hsp device
>> tree bindings.
>
> Reading the Tegra documentation, although the doorbells have dedicated
> interrupts, it appears that the doorbell interrupts can also be routed
> via these shared interrupts.

Thanks, I changed the text slightly to account for this.

>
>> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
>> ---
>>   Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt |
>> 2 ++
>>   1 file changed, 2 insertions(+)
>>
>> diff --git
>> a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
>> b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
>> index b99d25fc2f26..9edcdf82d719 100644
>> --- a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
>> +++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
>> @@ -21,6 +21,8 @@ Required properties:
>>       Contains a list of names for the interrupts described by the
>> interrupt
>>       property. May contain the following entries, in any order:
>>       - "doorbell"
>> +    - "sharedN", where 'N' is a number from zero up to the number of
>> +      external interrupts supported by the HSP instance minus one.
>>       Users of this binding MUST look up entries in the interrupt
>> property
>>       by name, using this interrupt-names property to do so.
>>   - interrupts
>
> How is the mapping of shared-mailboxes interrupts to the actual
> 'sharedN' interrupt managed?

Currently the driver always uses shared0 for mailbox-full interrupt, and
nothing else, which is what downstream does as well. It's difficult to
do anything else as we can trample on some other driver's configuration..

>
> Cheers
> Jon
>

Thanks,
Mikko

\
 
 \ /
  Last update: 2018-06-19 14:42    [W:0.050 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site