lkml.org 
[lkml]   [2018]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ARM: dts: imx6: RIoTboard Add chosen stdout-path property
From
Date
Am Montag, den 18.06.2018, 17:42 +0200 schrieb Emmanuel Vadot:
> The RIoTboard debug uart is connected to serial1.
> Add a chosen property in the DTS so OS knows what serial port to use for
> the console.
>
> > Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
> ---
>  arch/arm/boot/dts/imx6dl-riotboard.dts | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
> index 2e98c92adff7..315d2ae6fa45 100644
> --- a/arch/arm/boot/dts/imx6dl-riotboard.dts
> +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
> @@ -19,6 +19,10 @@
> >   reg = <0x10000000 0x40000000>;
> >   };
>  
> > + chosen {
> + stdout-path = "serial1:115200n8";

If there a reason to deviate from the "stdout-path = &uart1;" notation
used by other i.MX boards?

Regards,
Lucas

> + };
> +
> >   regulators {
> >   compatible = "simple-bus";
> >   #address-cells = <1>;

\
 
 \ /
  Last update: 2018-06-18 18:04    [W:0.059 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site