lkml.org 
[lkml]   [2018]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [linux-sunxi] [PATCH v2 20/27] drm/sun4i: Don't change clock bits in DW HDMI PHY driver
Date
Dne torek, 12. junij 2018 ob 22:00:29 CEST je Jernej Skrabec napisal(a):
> DW HDMI PHY driver and PHY clock driver share same registers. Make sure
> that DW HDMI PHY setup code doesn't change any clock related bits and
> set them to 0 during initialization.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
> drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 2 +-
> drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 12 +++++++++++-
> 2 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
> b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h index 79154f0f674a..3ba71aff92fc
> 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
> +++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
> @@ -98,7 +98,7 @@
> #define SUN8I_HDMI_PHY_PLL_CFG1_LDO2_EN BIT(29)
> #define SUN8I_HDMI_PHY_PLL_CFG1_LDO1_EN BIT(28)
> #define SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33 BIT(27)
> -#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL BIT(26)
> +#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK BIT(26)
> #define SUN8I_HDMI_PHY_PLL_CFG1_PLLEN BIT(25)
> #define SUN8I_HDMI_PHY_PLL_CFG1_LDO_VSET(x) ((x) << 22)
> #define SUN8I_HDMI_PHY_PLL_CFG1_UNKNOWN(x) ((x) << 20)
> diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c index 966688f04741..cd07ceb71601
> 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> @@ -183,7 +183,13 @@ static int sun8i_hdmi_phy_config_h3(struct dw_hdmi
> *hdmi, regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
> SUN8I_HDMI_PHY_ANA_CFG1_TXEN_MASK, 0);
>
> - regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, pll_cfg1_init);
> + /*
> + * NOTE: We have to be careful not to overwrite PHY parent
> + * clock selection bit and clock divider.
> + */
> + regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG,
> + (u32)~SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK,
> + pll_cfg1_init);
> regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG,
> (u32)~SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK,
> pll_cfg2_init);
> @@ -352,6 +358,10 @@ static void sun8i_hdmi_phy_init_h3(struct
> sun8i_hdmi_phy *phy) SUN8I_HDMI_PHY_ANA_CFG3_SCLEN |
> SUN8I_HDMI_PHY_ANA_CFG3_SDAEN);
>
> + /* reset PLL clock configuration */
> + regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, 0);
> + regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG, 0);
> +

For some reason, this change breaks HDMI on H3. Clearing only PLL parent
selection bit works ok, though. I'll fix it in next revision.

Best regards,
Jernej

> /* set HW control of CEC pins */
> regmap_write(phy->regs, SUN8I_HDMI_PHY_CEC_REG, 0);




\
 
 \ /
  Last update: 2018-06-15 18:46    [W:0.452 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site