lkml.org 
[lkml]   [2018]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v3 16/27] docs: Fix more broken references
    On Thu, Jun 14, 2018 at 01:09:01PM -0300, Mauro Carvalho Chehab wrote:
    > As we move stuff around, some doc references are broken. Fix some of
    > them via this script:
    > ./scripts/documentation-file-ref-check --fix
    >
    > Manually checked that produced results are valid.
    >
    > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

    For hwmon:

    Acked-by: Guenter Roeck <linux@roeck-us.net>

    > ---
    > .../devicetree/bindings/clock/st/st,clkgen.txt | 8 ++++----
    > .../devicetree/bindings/clock/ti/gate.txt | 2 +-
    > .../devicetree/bindings/clock/ti/interface.txt | 2 +-
    > .../bindings/cpufreq/cpufreq-mediatek.txt | 2 +-
    > .../devicetree/bindings/devfreq/rk3399_dmc.txt | 2 +-
    > .../bindings/gpu/arm,mali-midgard.txt | 2 +-
    > .../bindings/gpu/arm,mali-utgard.txt | 2 +-
    > .../devicetree/bindings/mfd/mt6397.txt | 2 +-
    > .../devicetree/bindings/mfd/sun6i-prcm.txt | 2 +-
    > .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 +-
    > .../devicetree/bindings/net/dsa/ksz.txt | 2 +-
    > .../devicetree/bindings/net/dsa/mt7530.txt | 2 +-
    > .../devicetree/bindings/power/fsl,imx-gpc.txt | 2 +-
    > .../bindings/power/wakeup-source.txt | 2 +-
    > .../devicetree/bindings/usb/rockchip,dwc3.txt | 2 +-
    > Documentation/hwmon/ina2xx | 2 +-
    > Documentation/maintainer/pull-requests.rst | 2 +-
    > Documentation/translations/ko_KR/howto.rst | 2 +-
    > MAINTAINERS | 18 +++++++++---------
    > drivers/net/ethernet/intel/Kconfig | 8 ++++----
    > drivers/soundwire/stream.c | 8 ++++----
    > fs/Kconfig.binfmt | 2 +-
    > fs/binfmt_misc.c | 2 +-
    > 23 files changed, 40 insertions(+), 40 deletions(-)
    >
    > diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
    > index 7364953d0d0b..45ac19bfa0a9 100644
    > --- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
    > +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
    > @@ -31,10 +31,10 @@ This binding uses the common clock binding[1].
    > Each subnode should use the binding described in [2]..[7]
    >
    > [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
    > -[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
    > -[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
    > -[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
    > -[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
    > +[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
    > +[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
    > +[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt
    > +[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt
    >
    >
    > Required properties:
    > diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
    > index 03f8fdee62a7..56d603c1f716 100644
    > --- a/Documentation/devicetree/bindings/clock/ti/gate.txt
    > +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
    > @@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for
    > that is used.
    >
    > [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
    > -[2] Documentation/devicetree/bindings/clock/gate-clock.txt
    > +[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
    > [3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
    >
    > Required properties:
    > diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
    > index 3111a409fea6..3f4704040140 100644
    > --- a/Documentation/devicetree/bindings/clock/ti/interface.txt
    > +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
    > @@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate
    > clock) and hardware autoidle enable / disable.
    >
    > [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
    > -[2] Documentation/devicetree/bindings/clock/gate-clock.txt
    > +[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
    >
    > Required properties:
    > - compatible : shall be one of:
    > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
    > index d36f07e0a2bb..0551c78619de 100644
    > --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
    > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
    > @@ -8,7 +8,7 @@ Required properties:
    > "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock
    > source (usually MAINPLL) when the original CPU PLL is under
    > transition and not stable yet.
    > - Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
    > + Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
    > generic clock consumer properties.
    > - operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt
    > for detail.
    > diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
    > index d6d2833482c9..fc2bcbe26b1e 100644
    > --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
    > +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
    > @@ -12,7 +12,7 @@ Required properties:
    > - clocks: Phandles for clock specified in "clock-names" property
    > - clock-names : The name of clock used by the DFI, must be
    > "pclk_ddr_mon";
    > -- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt
    > +- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp.txt
    > for details.
    > - center-supply: DMC supply node.
    > - status: Marks the node enabled/disabled.
    > diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
    > index 039219df05c5..18a2cde2e5f3 100644
    > --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
    > +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
    > @@ -34,7 +34,7 @@ Optional properties:
    > - mali-supply : Phandle to regulator for the Mali device. Refer to
    > Documentation/devicetree/bindings/regulator/regulator.txt for details.
    >
    > -- operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt
    > +- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
    > for details.
    >
    >
    > diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
    > index c1f65d1dac1d..63cd91176a68 100644
    > --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
    > +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
    > @@ -44,7 +44,7 @@ Optional properties:
    >
    > - memory-region:
    > Memory region to allocate from, as defined in
    > - Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt
    > + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
    >
    > - mali-supply:
    > Phandle to regulator for the Mali device, as defined in
    > diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
    > index d1df77f4d655..0ebd08af777d 100644
    > --- a/Documentation/devicetree/bindings/mfd/mt6397.txt
    > +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
    > @@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
    > It is interfaced to host controller using SPI interface by a proprietary hardware
    > called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
    > See the following for pwarp node definitions:
    > -Documentation/devicetree/bindings/soc/pwrap.txt
    > +Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
    >
    > This document describes the binding for MFD device and its sub module.
    >
    > diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
    > index dd2c06540485..4d21ffdb0fc1 100644
    > --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
    > +++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
    > @@ -9,7 +9,7 @@ Required properties:
    >
    > The prcm node may contain several subdevices definitions:
    > - see Documentation/devicetree/clk/sunxi.txt for clock devices
    > - - see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset
    > + - see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset
    > controller devices
    >
    >
    > diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
    > index a58c173b7ab9..0419a63f73a0 100644
    > --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
    > +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
    > @@ -62,7 +62,7 @@ Required properties for a slot (Deprecated - Recommend to use one slot per host)
    > rest of the gpios (depending on the bus-width property) are the data lines in
    > no particular order. The format of the gpio specifier depends on the gpio
    > controller.
    > -(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt)
    > +(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
    >
    > Example:
    >
    > diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
    > index fd23904ac68e..a700943218ca 100644
    > --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
    > +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt
    > @@ -6,7 +6,7 @@ Required properties:
    > - compatible: For external switch chips, compatible string must be exactly one
    > of: "microchip,ksz9477"
    >
    > -See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
    > +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
    > required and optional properties.
    >
    > Examples:
    > diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
    > index a9bc27b93ee3..aa3527f71fdc 100644
    > --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
    > +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
    > @@ -31,7 +31,7 @@ Required properties for the child nodes within ports container:
    > - phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
    > "cpu".
    >
    > -See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
    > +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
    > required, optional properties and how the integrated switch subnodes must
    > be specified.
    >
    > diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
    > index b31d6bbeee16..726ec2875223 100644
    > --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
    > +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
    > @@ -14,7 +14,7 @@ Required properties:
    > datasheet
    > - interrupts: Should contain one interrupt specifier for the GPC interrupt
    > - clocks: Must contain an entry for each entry in clock-names.
    > - See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
    > + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
    > - clock-names: Must include the following entries:
    > - ipg
    >
    > diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt
    > index 5d254ab13ebf..cfd74659fbed 100644
    > --- a/Documentation/devicetree/bindings/power/wakeup-source.txt
    > +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt
    > @@ -22,7 +22,7 @@ List of legacy properties and respective binding document
    > 3. "has-tpo" Documentation/devicetree/bindings/rtc/rtc-opal.txt
    > 4. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
    > Documentation/devicetree/bindings/mfd/tc3589x.txt
    > - Documentation/devicetree/bindings/input/ads7846.txt
    > + Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
    > 5. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
    > 6. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt
    > 7. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
    > diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
    > index 50a31536e975..252a05c5d976 100644
    > --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
    > +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
    > @@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of
    > the node is not important. The content of the node is defined in dwc3.txt.
    >
    > Phy documentation is provided in the following places:
    > -Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt
    > +Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
    >
    > Example device nodes:
    >
    > diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
    > index cfd31d94c872..72d16f08e431 100644
    > --- a/Documentation/hwmon/ina2xx
    > +++ b/Documentation/hwmon/ina2xx
    > @@ -53,7 +53,7 @@ bus supply voltage.
    >
    > The shunt value in micro-ohms can be set via platform data or device tree at
    > compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
    > -refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
    > +refer to the Documentation/devicetree/bindings/hwmon/ina2xx.txt for bindings
    > if the device tree is used.
    >
    > Additionally ina226 supports update_interval attribute as described in
    > diff --git a/Documentation/maintainer/pull-requests.rst b/Documentation/maintainer/pull-requests.rst
    > index a19db3458b56..22b271de0304 100644
    > --- a/Documentation/maintainer/pull-requests.rst
    > +++ b/Documentation/maintainer/pull-requests.rst
    > @@ -41,7 +41,7 @@ named ``char-misc-next``, you would be using the following command::
    >
    > that will create a signed tag called ``char-misc-4.15-rc1`` based on the
    > last commit in the ``char-misc-next`` branch, and sign it with your gpg key
    > -(see :ref:`Documentation/maintainer/configure_git.rst <configuregit>`).
    > +(see :ref:`Documentation/maintainer/configure-git.rst <configuregit>`).
    >
    > Linus will only accept pull requests based on a signed tag. Other
    > maintainers may differ.
    > diff --git a/Documentation/translations/ko_KR/howto.rst b/Documentation/translations/ko_KR/howto.rst
    > index 624654bdcd8a..a8197e072599 100644
    > --- a/Documentation/translations/ko_KR/howto.rst
    > +++ b/Documentation/translations/ko_KR/howto.rst
    > @@ -160,7 +160,7 @@ mtk.manpages@gmail.com의 메인테이너에게 보낼 것을 권장한다.
    > 독특한 행동에 관하여 흔히 있는 오해들과 혼란들을 해소하고 있기
    > 때문이다.
    >
    > - :ref:`Documentation/process/stable_kernel_rules.rst <stable_kernel_rules>`
    > + :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
    > 이 문서는 안정적인 커널 배포가 이루어지는 규칙을 설명하고 있으며
    > 여러분들이 이러한 배포들 중 하나에 변경을 하길 원한다면
    > 무엇을 해야 하는지를 설명한다.
    > diff --git a/MAINTAINERS b/MAINTAINERS
    > index ec65e33e2cf1..5871dd5060f6 100644
    > --- a/MAINTAINERS
    > +++ b/MAINTAINERS
    > @@ -4513,7 +4513,7 @@ DRM DRIVER FOR ILITEK ILI9225 PANELS
    > M: David Lechner <david@lechnology.com>
    > S: Maintained
    > F: drivers/gpu/drm/tinydrm/ili9225.c
    > -F: Documentation/devicetree/bindings/display/ili9225.txt
    > +F: Documentation/devicetree/bindings/display/ilitek,ili9225.txt
    >
    > DRM DRIVER FOR INTEL I810 VIDEO CARDS
    > S: Orphan / Obsolete
    > @@ -4599,13 +4599,13 @@ DRM DRIVER FOR SITRONIX ST7586 PANELS
    > M: David Lechner <david@lechnology.com>
    > S: Maintained
    > F: drivers/gpu/drm/tinydrm/st7586.c
    > -F: Documentation/devicetree/bindings/display/st7586.txt
    > +F: Documentation/devicetree/bindings/display/sitronix,st7586.txt
    >
    > DRM DRIVER FOR SITRONIX ST7735R PANELS
    > M: David Lechner <david@lechnology.com>
    > S: Maintained
    > F: drivers/gpu/drm/tinydrm/st7735r.c
    > -F: Documentation/devicetree/bindings/display/st7735r.txt
    > +F: Documentation/devicetree/bindings/display/sitronix,st7735r.txt
    >
    > DRM DRIVER FOR TDFX VIDEO CARDS
    > S: Orphan / Obsolete
    > @@ -4824,7 +4824,7 @@ M: Eric Anholt <eric@anholt.net>
    > S: Supported
    > F: drivers/gpu/drm/v3d/
    > F: include/uapi/drm/v3d_drm.h
    > -F: Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt
    > +F: Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
    > T: git git://anongit.freedesktop.org/drm/drm-misc
    >
    > DRM DRIVERS FOR VC4
    > @@ -5735,7 +5735,7 @@ M: Madalin Bucur <madalin.bucur@nxp.com>
    > L: netdev@vger.kernel.org
    > S: Maintained
    > F: drivers/net/ethernet/freescale/fman
    > -F: Documentation/devicetree/bindings/powerpc/fsl/fman.txt
    > +F: Documentation/devicetree/bindings/net/fsl-fman.txt
    >
    > FREESCALE QORIQ PTP CLOCK DRIVER
    > M: Yangbo Lu <yangbo.lu@nxp.com>
    > @@ -8700,7 +8700,7 @@ M: Guenter Roeck <linux@roeck-us.net>
    > L: linux-hwmon@vger.kernel.org
    > S: Maintained
    > F: Documentation/hwmon/max6697
    > -F: Documentation/devicetree/bindings/i2c/max6697.txt
    > +F: Documentation/devicetree/bindings/hwmon/max6697.txt
    > F: drivers/hwmon/max6697.c
    > F: include/linux/platform_data/max6697.h
    >
    > @@ -9080,7 +9080,7 @@ M: Martin Donnelly <martin.donnelly@ge.com>
    > M: Martyn Welch <martyn.welch@collabora.co.uk>
    > S: Maintained
    > F: drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
    > -F: Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
    > +F: Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
    >
    > MEGARAID SCSI/SAS DRIVERS
    > M: Kashyap Desai <kashyap.desai@broadcom.com>
    > @@ -10728,7 +10728,7 @@ PARALLEL LCD/KEYPAD PANEL DRIVER
    > M: Willy Tarreau <willy@haproxy.com>
    > M: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
    > S: Odd Fixes
    > -F: Documentation/misc-devices/lcd-panel-cgram.txt
    > +F: Documentation/auxdisplay/lcd-panel-cgram.txt
    > F: drivers/misc/panel.c
    >
    > PARALLEL PORT SUBSYSTEM
    > @@ -13291,7 +13291,7 @@ M: Vinod Koul <vkoul@kernel.org>
    > L: alsa-devel@alsa-project.org (moderated for non-subscribers)
    > T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
    > S: Supported
    > -F: Documentation/sound/alsa/compress_offload.txt
    > +F: Documentation/sound/designs/compress-offload.rst
    > F: include/sound/compress_driver.h
    > F: include/uapi/sound/compress_*
    > F: sound/core/compress_offload.c
    > diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
    > index 14d287bed33c..1ab613eb5796 100644
    > --- a/drivers/net/ethernet/intel/Kconfig
    > +++ b/drivers/net/ethernet/intel/Kconfig
    > @@ -33,7 +33,7 @@ config E100
    > to identify the adapter.
    >
    > More specific information on configuring the driver is in
    > - <file:Documentation/networking/e100.txt>.
    > + <file:Documentation/networking/e100.rst>.
    >
    > To compile this driver as a module, choose M here. The module
    > will be called e100.
    > @@ -49,7 +49,7 @@ config E1000
    > <http://support.intel.com>
    >
    > More specific information on configuring the driver is in
    > - <file:Documentation/networking/e1000.txt>.
    > + <file:Documentation/networking/e1000.rst>.
    >
    > To compile this driver as a module, choose M here. The module
    > will be called e1000.
    > @@ -94,7 +94,7 @@ config IGB
    > <http://support.intel.com>
    >
    > More specific information on configuring the driver is in
    > - <file:Documentation/networking/e1000.txt>.
    > + <file:Documentation/networking/e1000.rst>.
    >
    > To compile this driver as a module, choose M here. The module
    > will be called igb.
    > @@ -130,7 +130,7 @@ config IGBVF
    > <http://support.intel.com>
    >
    > More specific information on configuring the driver is in
    > - <file:Documentation/networking/e1000.txt>.
    > + <file:Documentation/networking/e1000.rst>.
    >
    > To compile this driver as a module, choose M here. The module
    > will be called igbvf.
    > diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
    > index 8974a0fcda1b..4b5e250e8615 100644
    > --- a/drivers/soundwire/stream.c
    > +++ b/drivers/soundwire/stream.c
    > @@ -1291,7 +1291,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
    > *
    > * @stream: Soundwire stream
    > *
    > - * Documentation/soundwire/stream.txt explains this API in detail
    > + * Documentation/driver-api/soundwire/stream.rst explains this API in detail
    > */
    > int sdw_prepare_stream(struct sdw_stream_runtime *stream)
    > {
    > @@ -1348,7 +1348,7 @@ static int _sdw_enable_stream(struct sdw_stream_runtime *stream)
    > *
    > * @stream: Soundwire stream
    > *
    > - * Documentation/soundwire/stream.txt explains this API in detail
    > + * Documentation/driver-api/soundwire/stream.rst explains this API in detail
    > */
    > int sdw_enable_stream(struct sdw_stream_runtime *stream)
    > {
    > @@ -1400,7 +1400,7 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream)
    > *
    > * @stream: Soundwire stream
    > *
    > - * Documentation/soundwire/stream.txt explains this API in detail
    > + * Documentation/driver-api/soundwire/stream.rst explains this API in detail
    > */
    > int sdw_disable_stream(struct sdw_stream_runtime *stream)
    > {
    > @@ -1456,7 +1456,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)
    > *
    > * @stream: Soundwire stream
    > *
    > - * Documentation/soundwire/stream.txt explains this API in detail
    > + * Documentation/driver-api/soundwire/stream.rst explains this API in detail
    > */
    > int sdw_deprepare_stream(struct sdw_stream_runtime *stream)
    > {
    > diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
    > index 57a27c42b5ac..56df483de619 100644
    > --- a/fs/Kconfig.binfmt
    > +++ b/fs/Kconfig.binfmt
    > @@ -168,7 +168,7 @@ config BINFMT_MISC
    > will automatically feed it to the correct interpreter.
    >
    > You can do other nice things, too. Read the file
    > - <file:Documentation/binfmt_misc.txt> to learn how to use this
    > + <file:Documentation/admin-guide/binfmt-misc.rst> to learn how to use this
    > feature, <file:Documentation/admin-guide/java.rst> for information about how
    > to include Java support. and <file:Documentation/admin-guide/mono.rst> for
    > information about how to include Mono-based .NET support.
    > diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
    > index 4de191563261..4b5fff31ef27 100644
    > --- a/fs/binfmt_misc.c
    > +++ b/fs/binfmt_misc.c
    > @@ -4,7 +4,7 @@
    > * Copyright (C) 1997 Richard Günther
    > *
    > * binfmt_misc detects binaries via a magic or filename extension and invokes
    > - * a specified wrapper. See Documentation/binfmt_misc.txt for more details.
    > + * a specified wrapper. See Documentation/admin-guide/binfmt-misc.rst for more details.
    > */
    >
    > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    > --
    > 2.17.1
    >
    > --
    > To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
    > the body of a message to majordomo@vger.kernel.org
    > More majordomo info at http://vger.kernel.org/majordomo-info.html

    \
     
     \ /
      Last update: 2018-06-14 18:23    [W:4.204 / U:0.076 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site