lkml.org 
[lkml]   [2018]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 4/4] arm: dts: add support for Laird SOM60 module and DVK boards
From
Date
On 14/06/2018 at 10:51, Ben Whitten wrote:
> Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
> ---
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/at91-dvk_som60.dts | 95 +++++++++++
> arch/arm/boot/dts/at91-dvk_su60_somc.dtsi | 159 ++++++++++++++++++
> arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi | 96 +++++++++++
> arch/arm/boot/dts/at91-som60.dtsi | 229 ++++++++++++++++++++++++++
> 5 files changed, 581 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/at91-dvk_som60.dts
> create mode 100644 arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
> create mode 100644 arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
> create mode 100644 arch/arm/boot/dts/at91-som60.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 486ab59..4d3d9ca 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -63,7 +63,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
> at91-sama5d4ek.dtb \
> at91-vinco.dtb \

About where you added dtbs...

> at91-wb50n.dtb \
> - at91-gatwick.dtb
> + at91-gatwick.dtb \
> + at91-dvk_som60.dtb

1/ As they are based on sama5d3, I would like to see them between
"at91-sama5d2_xplained.dtb" and "sama5d31ek.dtb"
2/ within this range, please sort all these 4 alphabetically
3/ don't laugh at me, I try to deal with our historical way of "sorting"
entries in this Makefile for AT91... ;-)

BTW, I realize now that your "at91-wb45n.dtb" entry from patch 1 should
go just after the "at91-kizboxmini.dts" (alphabetical order in
at91sam9x5 "location").


> dtb-$(CONFIG_ARCH_ATLAS6) += \
> atlas6-evb.dtb
> dtb-$(CONFIG_ARCH_ATLAS7) += \
> diff --git a/arch/arm/boot/dts/at91-dvk_som60.dts b/arch/arm/boot/dts/at91-dvk_som60.dts
> new file mode 100644
> index 0000000..ededd5b
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91-dvk_som60.dts
> @@ -0,0 +1,95 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * at91-dvk_som60.dts - Device Tree file for the DVK SOM60 board
> + *
> + * Copyright (C) 2018 Laird,
> + * 2018 Ben Whitten <ben.whitten@lairdtech.com>
> + *
> + */
> +/dts-v1/;
> +#include "at91-som60.dtsi"
> +#include "at91-dvk_su60_somc.dtsi"
> +#include "at91-dvk_su60_somc_lcm.dtsi"
> +
> +/ {
> + model = "Laird DVK SOM60";
> + compatible = "laird,dvk-som60", "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
> +
> + chosen {
> + stdout-path = &dbgu;
> + tick-timer = &pit;
> + };
> +};
> +
> +&mmc0 {
> + status = "okay";
> +};
> +
> +&spi0 {
> + status = "okay";
> +};
> +
> +&ssc0 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +};
> +
> +&usart1 {
> + status = "okay";
> +};
> +
> +&usart2 {
> + status = "okay";
> +};
> +
> +&usart3 {
> + status = "okay";
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&dbgu {
> + status = "okay";
> +};
> +
> +&pit {
> + status = "okay";
> +};
> +
> +&adc0 {
> + status = "okay";
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> +&macb0 {
> + status = "okay";
> +};
> +
> +&macb1 {
> + status = "okay";
> +};
> +
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
> +
> +&usb2 {
> + status = "okay";
> +};
> +
> diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
> new file mode 100644
> index 0000000..6031c2f
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
> @@ -0,0 +1,159 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * at91-dvk_su60_somc.dtsi - Device Tree file for the DVK SOM60 base board
> + *
> + * Copyright (C) 2018 Laird,
> + * 2018 Ben Whitten <ben.whitten@lairdtech.com>
> + *
> + */
> +
> +/ {
> + sound {
> + compatible = "atmel,asoc-wm8904";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
> +
> + atmel,model = "wm8904 @ DVK-SOM60";
> + atmel,audio-routing =
> + "Headphone Jack", "HPOUTL",
> + "Headphone Jack", "HPOUTR",
> + "IN2L", "Line In Jack",
> + "IN2R", "Line In Jack",
> + "Mic", "MICBIAS",
> + "IN1L", "Mic";
> +
> + atmel,ssc-controller = <&ssc0>;
> + atmel,audio-codec = <&wm8904>;
> +
> + status = "okay";
> + };
> +};
> +
> +&mmc0 {
> + status = "okay";
> +
> + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
> + slot@0 {
> + bus-width = <4>;
> + cd-gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> + };
> +};
> +
> +&spi0 {
> + status = "okay";
> +
> + /* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
> + spi-flash@0 {
> + compatible = "mxicy,mx25u4035", "jedec,spi-nor";
> + spi-max-frequency = <33000000>;
> + reg = <0>;
> + };
> +};
> +
> +&ssc0 {
> + atmel,clk-from-rk-pin;
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + wm8904: wm8904@1a {
> + compatible = "wlf,wm8904";
> + reg = <0x1a>;
> + clocks = <&pck2>;
> + clock-names = "mclk";
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + eeprom@87 {
> + compatible = "giantec,24c32";
It must work, however...

I read in recent patches on dts directory that :

"We now require all at24 users to use the "atmel,<model>" fallback in
device tree for different manufacturers."

Moreover, I don't see giantec in the vendor prefix list.


> + reg = <87>;
> + pagesize = <32>;
> + };
> +};
> +
> +&usart1 {
> + status = "okay";
> +};
> +
> +&usart2 {
> + status = "okay";
> +};
> +
> +&usart3 {
> + status = "okay";
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&dbgu {
> + status = "okay";
> +};
> +
> +&pit {
> + status = "okay";
> +};
> +
> +&adc0 {
> + status = "okay";
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> +&macb0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> +
> + ethernet-phy@7 {
> + reg = <7>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_geth_int>;
> + interrupt-parent = <&pioB>;
> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> + txen-skew-ps = <800>;
> + txc-skew-ps = <3000>;
> + rxdv-skew-ps = <400>;
> + rxc-skew-ps = <3000>;
> + rxd0-skew-ps = <400>;
> + rxd1-skew-ps = <400>;
> + rxd2-skew-ps = <400>;
> + rxd3-skew-ps = <400>;
> + };
> +};
> +
> +&macb1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> +
> + ethernet-phy@1 {
> + reg = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_eth_int>;
> + interrupt-parent = <&pioC>;
> + interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
> + };
> +};
> +
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
> +
> +&usb2 {
> + status = "okay";
> +};
> +
> diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
> new file mode 100644
> index 0000000..d98c644
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
> @@ -0,0 +1,96 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * at91-dvk_su60_somc_lcm.dtsi - Device Tree file for the DVK SOM60 LCD board
> + *
> + * Copyright (C) 2018 Laird,
> + * 2018 Ben Whitten <ben.whitten@lairdtech.com>
> + *
> + */
> +
> +/ {
> + ahb {
> + apb {
> + pinctrl@fffff200 {
> + board {
> + pinctrl_lcd_ctp_int: lcd_ctp_int {
> + atmel,pins =
> + <AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
> + };
> + };
> + };
> + };
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&hlcdc_pwm 0 50000 0>;
> + brightness-levels = <0 4 8 16 32 64 128 255>;
> + default-brightness-level = <6>;
> + status = "okay";
> + };
> +
> + panel: panel {
> + /* Actually Winstar WF70GTIAGDNG0 */
> + compatible = "innolux,at070tn92", "simple-panel";
> + backlight = <&backlight>;
> + power-supply = <&vcc_lcd_reg>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> +
> + port@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + panel_input: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&hlcdc_panel_output>;
> + };
> + };
> + };
> +
> + vcc_lcd_reg: fixedregulator_lcd {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC LCM";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + status = "okay";
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + ft5426@56 {
> + /* Actually FT5426 */
> + compatible = "edt,edt-ft5406";
> + reg = <56>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcd_ctp_int>;
> +
> + interrupt-parent = <&pioC>;
> + interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
> +
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <480>;
> + };
> +};
> +
> +&hlcdc {
> + status = "okay";
> +
> + hlcdc-display-controller {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
> +
> + port@0 {
> + hlcdc_panel_output: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&panel_input>;
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/at91-som60.dtsi b/arch/arm/boot/dts/at91-som60.dtsi
> new file mode 100644
> index 0000000..1843284
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91-som60.dtsi
> @@ -0,0 +1,229 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * at91-som60.dtsi - Device Tree file for the SOM60 module
> + *
> + * Copyright (C) 2018 Laird,
> + * 2018 Ben Whitten <ben.whitten@lairdtech.com>
> + *
> + */
> +#include "sama5d36.dtsi"
> +
> +/ {
> + model = "Laird SOM60";
> + compatible = "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
> +
> + chosen {
> + stdout-path = &dbgu;
> + };
> +
> + memory {
> + reg = <0x20000000 0x8000000>;
> + };
> +
> + clocks {
> + slow_xtal {
> + clock-frequency = <32768>;
> + };
> +
> + main_xtal {
> + clock-frequency = <12000000>;
> + };
> + };
> +
> + ahb {
> + apb {
> + pinctrl@fffff200 {
> + board {
> + pinctrl_mmc0_cd: mmc0_cd {
> + atmel,pins =
> + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
> + };
> +
> + pinctrl_mmc0_en: mmc0_en {
> + atmel,pins =
> + <AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_nand0_wp: nand0_wp {
> + atmel,pins =
> + <AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
> + };
> +
> + pinctrl_usb_vbus: usb_vbus {
> + atmel,pins =
> + <AT91_PIOE 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* Conflicts with USART2_SCK */
> + };
> +
> + pinctrl_usart2_sck: usart2_sck {
> + atmel,pins =
> + <AT91_PIOE 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* Conflicts with USB_VBUS */
> + };
> +
> + pinctrl_usb_oc: usb_oc {
> + atmel,pins =
> + <AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* Conflicts with USART3_SCK */
> + };
> +
> + pinctrl_usart3_sck: usart3_sck {
> + atmel,pins =
> + <AT91_PIOE 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* Conflicts with USB_OC */
> + };
> +
> + pinctrl_usba_vbus: usba_vbus {
> + atmel,pins =
> + <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
> + };
> +
> + pinctrl_geth_int: geth_int {
> + atmel,pins =
> + <AT91_PIOB 25 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* Conflicts with USART1_SCK */
> + };
> +
> + pinctrl_usart1_sck: usart1_sck {
> + atmel,pins =
> + <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* Conflicts with GETH_INT */
> + };
> +
> + pinctrl_eth_int: eth_int {
> + atmel,pins =
> + <AT91_PIOC 10 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
> + };
> +
> + pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
> + atmel,pins =
> + <AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> + };
> + };
> + };
> + };
> +};
> +
> +&mmc0 {
> + slot@0 {
> + reg = <0>;
> + bus-width = <8>;
> + };
> +};
> +
> +&mmc1 {
> + status = "okay";
> + slot@0 {
> + reg = <0>;
> + bus-width = <4>;
> + };
> +};
> +
> +&spi0 {
> + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
> +};
> +
> +&usart0 {
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + status = "okay";
> + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
> +};
> +
> +&usart1 {
> + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
> +};
> +
> +&usart2 {
> + pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts_cts>;
> +};
> +
> +&usart3 {
> + pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
> +};
> +
> +&adc0 {
> + pinctrl-0 = <
> + &pinctrl_adc0_adtrg
> + &pinctrl_adc0_ad0
> + &pinctrl_adc0_ad1
> + &pinctrl_adc0_ad2
> + &pinctrl_adc0_ad3
> + &pinctrl_adc0_ad4
> + &pinctrl_adc0_ad5
> + >;
> +};
> +
> +&macb0 {
> + phy-mode = "rgmii";
> +};
> +
> +&macb1 {
> + phy-mode = "rmii";
> +};
> +
> +
> +&ebi {
> + pinctrl-0 = <&pinctrl_ebi_nand_addr>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&nand_controller {
> + status = "okay";
> +
> + nand: nand@3 {
> + reg = <0x3 0x0 0x2>;
> + atmel,rb = <0>;
> + nand-bus-width = <8>;
> + nand-ecc-mode = "hw";
> + nand-ecc-strength = <8>;
> + nand-ecc-step-size = <512>;
> + nand-on-flash-bbt;
> + label = "atmel_nand";
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + ubootspl@0 {
> + label = "u-boot-spl";
> + reg = <0x0 0x20000>;
> + };
> +
> + uboot@20000 {
> + label = "u-boot";
> + reg = <0x20000 0x80000>;
> + };
> +
> + ubootenv@a0000 {
> + label = "u-boot-env";
> + reg = <0xa0000 0x20000>;
> + };
> +
> + ubootenv@c0000 {
> + label = "u-boot-env";
> + reg = <0xc0000 0x20000>;
> + };
> +
> + ubi@e0000 {
> + label = "ubi";
> + reg = <0xe0000 0xfe00000>;
> + };
> + };
> + };
> +};
> +
> +&usb0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usba_vbus>;
> + atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&usb1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>;
> + num-ports = <3>;
> + atmel,vbus-gpio = <0
> + &pioE 20 GPIO_ACTIVE_HIGH
> + 0>;
> + atmel,oc-gpio = <0
> + &pioE 15 GPIO_ACTIVE_LOW
> + 0>;
> +};
>


--
Nicolas Ferre

\
 
 \ /
  Last update: 2018-06-14 15:15    [W:0.634 / U:0.256 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site