lkml.org 
[lkml]   [2018]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH V2 1/3] scsi: ufs: set the device reference clock setting
Date
Comment inline.

Thanks,
Sayali
-----Original Message-----
From: Rob Herring [mailto:robh@kernel.org]
Sent: Wednesday, June 13, 2018 12:57 AM
To: Sayali Lokhande <sayalil@codeaurora.org>
Cc: subhashj@codeaurora.org; cang@codeaurora.org;
vivek.gautam@codeaurora.org; rnayak@codeaurora.org; vinholikatti@gmail.com;
jejb@linux.vnet.ibm.com; martin.petersen@oracle.com;
asutoshd@codeaurora.org; evgreen@chromium.org; linux-scsi@vger.kernel.org;
Mark Rutland <mark.rutland@arm.com>; Mathieu Malaterre <malat@debian.org>;
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
<devicetree@vger.kernel.org>; open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH V2 1/3] scsi: ufs: set the device reference clock
setting

On Fri, Jun 08, 2018 at 04:36:28PM +0530, Sayali Lokhande wrote:
> From: Subhash Jadavani <subhashj@codeaurora.org>
>
> UFS host supplies the reference clock to UFS device and UFS device
> specification allows host to provide one of the 4 frequencies (19.2
> MHz,
> 26 MHz, 38.4 MHz, 52 MHz) for reference clock. Host should set the
> device reference clock frequency setting in the device based on what
> frequency it is supplying to UFS device.
>
> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
> Signed-off-by: Can Guo <cang@codeaurora.org>
> Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
> ---
> .../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 7 +++
> drivers/scsi/ufs/ufs.h | 9 ++++
> drivers/scsi/ufs/ufshcd-pltfrm.c | 24 ++++++++++
> drivers/scsi/ufs/ufshcd.c | 52
++++++++++++++++++++++
> drivers/scsi/ufs/ufshcd.h | 1 +
> 5 files changed, 93 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> index c39dfef..4522434 100644
> --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> @@ -41,6 +41,12 @@ Optional properties:
> -lanes-per-direction : number of lanes available per direction - either 1
or 2.
> Note that it is assume same number of lanes is
used both
> directions at once. If not specified, default is 2
lanes per direction.
> +- dev-ref-clk-freq : Specify the device reference clock frequency, must
be one of the following:
> + 0: 19.2 MHz
> + 1: 26 MHz
> + 2: 38.4 MHz
> + 3: 52 MHz
> + Defaults to 26 MHz if not specified.

I must have misunderstood your last response. I thought you could handle
things without DT. If not, my question remains.
[Sayali]: Ref clk frequency setting could vary from
platfrom-to-platform(vendor specific). Hence we need to pass it via DT.
Currently in DT we do not set/mention any ref clk frequency
parameter. Hence I have added one new DT entry to configure
required ref clk freq.

Rob

\
 
 \ /
  Last update: 2018-06-14 13:34    [W:0.066 / U:1.656 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site